Self-purification of rivers a two-phase model for bacterial biodegradation

A simple two-phase model has been developed, which accounts for up to 95% of the total oxygen consumption during the bacterial phase of river self-purification. The two phases are characterized by a logistic model. The first corresponds roughly to a destruction of of the substrate, and is accompanied by the formation of cellular reserves. The second is the consumption of these stored substances, and begins when the external substrate ceases to be more attractive than the endogenous reserves. The cell yield as well as the stored material proportion appear to be constant, while the kinetic parameter ( ) is strongly S₀ dependent. All this can be studied through oxygen balances.     

A steady-state model for the rotating biological disc reactor

A steady-state model for substrate removal in a rotating biological disc reactor is presented. The model considers the consumption of substrate by micro-organisms in the biofilm attached to the rotating disc, and mass transfer from the attached liquid film to the biofilm. A mass balance on substrate over the liquid in the trough provides an expression for effluent substrate in terms of the microbial kinetic constants, the geometry of the system and the operating conditions. In order to simplify the solution of the equations in the model, first order kinetics are assumed for the rate of microbial growth and substrate utilization. This simplified model can be solved, for example, by using a programmable calculator. The model predicts that the fractional removal of substrate per stage is strongly dependent on the hydraulic loading rate per unit disc area but independent of feed substrate concentration. It predicts constant removal independent of disc size provided the hydraulic loading per unit area is kept constant. The rotational speed has only a slight predicted effect on the rate of substrate removal. The predictions of the model are compared with published data from the literature for both domestic wastewater and some industrial wastes. Trends observed in the field are predicted qualitatively by the model.     

Betons a hautes performances,a granulats artificiels actifs

High strength concretes, in particular at early ages (more than 40 MPa at 3 days and up to 80 MPa at 7 days), are obtained by replacement of certain granular size ranges of sand or gravel by cement-active artificial aggregates in a given concrete composition elaborated with a local supply of aggregates and cement. The strengthening of the paste-aggregate bond by chemical reactions between the artificial aggregates and the cement also involves an improvement of other concrete performances and not only of mechanical strengths. The cracking ability is decreased, the wear strength is higher, and water permeability is low or even nil for certain compositions. The laboratory results are confirmed by tests on the site and show the possibility of achieving high strength concretes without any particular selection of cement and natural aggregates.     

Tunnelling projects in Southern Africa

Until some thirty years ago tunnelling in southern Africa for civil engineering purposes had been on a relatively small scale and of a sporadic nature. The first major tunnel to be built in the region was the 82 km long Orange-Fish Tunnel. Since 1970 more than 175 tunnels with an aggregate length of just over 400 km have been built. Much of the first phase of the Lesotho Highlands Water Project, which will have more than 100 km of tunnels, is about to be completed. The last thirty years represent the busiest period of tunnelling by civil engineers that southern Africa has ever known. The paper starts by summarising the early history of tunnelling in the region, and goes onto describe recent and current tunnelling projects. It also gives an indication of the possible demand for tunnels in the future.     

Lead in glasgow street dirt and soul

The levels of lead in city street dirt and in soil from various locations in Glasgow were investigated during spring 1976. Lead concentrations in street dirt ranged from 150–2300 ppm, mean 960 ppm, and were significantly elevated with respect to the observed “natural” level of 78 ppm. Lead derived from anti-knock compounds in petrol and introduced to the environment via automobile exhausts was clearly implicated as the main source of lead pollution in a series of soil lead measurements at the centre and periphery of eight Glasgow parks.Various chemical leaching techniques were employed and compared. Less than 5% of street dirt and soil lead was found to be associated with the organic phase.     

Toxicity, accumulation and elimination studies of α-hexachlorocyclohexane (α-HCH) with freshwater organisms of different trophic levels

A short- and long-term toxicity study with α-hexachlorocyclohexane (α-HCH) was carried out with freshwater organisms of different trophic levels (algae, crustaceae and fishes). In this study mortality, immobilization, growth, reproduction, histopathologic changes and enzyme activities were chosen as criteria.Furthermore accumulation and elimination processes were investigated in separate organisms as well as the uptake of α-HCH by one organism and through a food-chain.Finally a tentative method for deriving an “ecological limit” for χ-HCH in surface water is described.     

The effect of temperature on the removal of non-ionic surfactants during small-scale activated-sludge sewage treatment—I. Comparison of alcohol ethoxylates with a branched-chain alkyl phenol ethoxylate

The degree of biodegradability of three non-ionic surfactants has been assessed using small-scale activated-sludge sewage treatment plants. The effect of temperature on biodegradability was studied by operation at 15°, 11° and 8°C.The two alcohol ethoxylate surfactants tested were well degraded at all three operating temperatures. The alkyl phenol ethoxylate surfactant tested was well degraded at 15°C but at lower temperatures the biodegradability was dependent on concentration. At 5 mg 1⁻¹, greater than 90 per cent removal was achieved but at 20 mg 1⁻¹ the degree of removal fluctuated between 40 and 95 per cent at 11°C and between 20 and 80 per cent at 8°C.The present results have been compared with those obtained using the same surfactants in community trials at a small sewage works employing biological filtration. Although a similar temperature effect was observed with the alkyl phenol ethoxylate, the biodegradabilities obtained in the laboratory were consistently greater than those obtained at the sewage works, perhaps because of the constant conditions of the laboratory test.     

Interstitial inorganic phosphorus concentrations in lakes Mendota and Wingra

Interstitial P levels in Lake Mendota and Lake Wingra were evaluated as a function of season and water column and sediment depth. Interstitial water was obtained by the centrifugation-filtration method. Temporal variations were observed over the entire 15 cm sediment depth interval examined in all four locations evaluated. Interstitial reactive P (IRP) levels in Lake Mendota ranged from 0.014–1.67 mg l⁻¹ at the 5–6 m water column depth and from 1.20–5.75 mg l⁻¹ at the 18–19.5 m depth. IRP levels in Lake Wingra ranged from 0.029–2.15 mg l⁻¹ at 3.5 m and from 0.191–3.96 mg l⁻¹ at 2 m. Variations in interstitial P were attributed to variations in oxidation state of Fe as influenced by oxygen transport and reduction rates.     

Coping with COPA II: Actions to Improve Effluent Quality

The paper outlines some of the actions taken by Severn Trent Water to achieve compliance with consent limits since the implementation of the Control of Pollution Act (Part II) in 1985.
Prior to and since 1985, Severn Trent Water has undertaken an extensive programme to analyse the reasons for failure and carry out remedial work. A major feature of this programme, which has been further stimulated by privatization, has been the need to reduce the lead time for carrying out improvements.
The paper discusses the means by which this has been achieved, including the introduction of the 'fast-track'initiative and the 'process matrix'.
Other aspects are outlined including initiatives to develop more robust processes, computerized work scheduling, extensive training programmes and best practice studies.     

Structural analysis of assemblages of thin-walled members

A matrix method for the analysis of structural systems composed of thin-walled members is presented. The matrix displacement analysis includes the effects of thin-walled non-uniform torsion theory, cross-section asymmetry, eccentric restraint as well as joint types peculiar to thin-walled members. The method is used for a prediction of the elastic behaviour of a set of representative test frames. The test frames were pitched-roof portals constructed from channel sections bent about their major-axis and supported by eccentric restraints simulating purlins and girts.