Thermal expansion characteristics of a titanium modified austenitic stainless steel: measurement by high-temperature X-ray diffraction and modelling using Grüneisen formalism

The thermal expansion of a titanium modified, swelling resistant austenitic stainless steel designated as D9 is studied by measuring the lattice parameter as a function of temperature in the range 300-1300 K by high-temperature X-ray diffraction technique. The thermal expansion data thus obtained is in reasonable agreement with the typical thermal expansion values reported for similar nuclear grade austenitic stainless steels. However, at temperatures exceeding 900 K, the measured thermal expansivity exhibits a pronounced non-linear increase due partly to the precipitation of complex carbide and intermetallic phases. The high-temperature thermal expansion data obtained in the present study are augmented by modelling the low-temperature thermal expansion behaviour by Grüneisen formalism.     

Natural language interface and database issues in applying expertsystems to power systems

Applying expert systems (ESs) to power system operation means embedding them in an existing environment which consists of computational facilities (SCADA, EMS) on one side, and the operating staff on the other side. An interface between process data and ES data is required to achieve this goal. For an unambiguous and clear information exchange with and good acceptance by the operators, an approximate natural language dialogue of the ES is desirable. Several approaches to these problems are described     

Conducting polymers at low temperatures and high magnetic fields

Advances in the synthesis of organic conducting polymer systems has increased the electrical conductivity of these systems by several orders of magnitude in the last decade. Several practical applications are envisioned for such systems, but a thorough understanding of the conduction mechanisms and identification of the charge carriers is lacking, making design and implementation for bulk synthesis difficult. In order to clarify our understanding of the electrical properties of these systems, the resistivity and magnetoresistivity of various polymers doped near the metal - insulator transition, such as polyaniline protonated by camphor sulfonic acid (PANi-CSA) and polypyrrole doped with PF₆ (PPy-PF₆), have been studied down to 25 mK in magnetic fields up to 16 T.     

Mechanisms in damping of mechanical vibration by piezoelectric ceramic-polymer composite materials

The piezoelectric ceramic (piezoceramic) component of a polymer-piezoelectric ceramic composite converts mechanical energy into electrical energy and this electrical energy is dissipated as heat in a load resistance, R _x, simulated by a shunted resistance, but provided in practice by a conductive polymer composite matrix. The composite therefore dissipates the input mechanical energy via the damping mechanism provided by piezoelectric ceramic-conductive matrix material, as well as the conventional viscoelastic damping provided by the polymer. Mathematical models have been developed to characterize the damping behaviour of the composites, and the maximum damping ratio of composites can be as high as 23%. A two degrees-of-freedom (2DOF) experimental setup was developed to test the validity of the models. The experimental results are in good agreement with the theoretical predictions.     

The static and dynamic characteristics of single and multiplephase-shifted DFB laser structures

The influence of longitudinal mode spatial hole burning (LMSHB) on the performance of distributed feedback (DFB) laser structures is examined in detail. A comprehensive model has been used to interpret the experimental results and to construct a theoretical framework that was utilized to develop more advanced device designs. An increasing side mode intensity with output power, movement of the lasing mode relative to the stopband, and curvature of the light-current characteristic at low power can all be manifestations of the influence of LMSHB on the static device performance. The dynamic behavior can also be affected, with extended wavelength chirp and amplitude patterning effects on the timescale of the effective carrier recombination time being particularly important     

Primer-induced labeling of pea and field bean chromosomes in situ and in suspension

A protocol for primed in situ DNA labeling (PRINS) was optimized for pea (Pisum sativum L.) and field bean (Vicia faba L.) chromosomes attached to coverslips. Cloned DNA or synthetic oligonucleotides were used as probes for repetitive DNA sequences (rDNA, Fok-element) and different reaction conditions were tested to achieve the highest specific signal-to-background ratio. A procedure based on direct labeling by fluorescein-dUTP was compared with an indirect one using digoxigenin detected by fluorescently labeled antibody. Under optimal conditions, strong and specific signals were obtained exclusively on chromosome regions known to contain respective DNA sequences. Compared to the direct labeling, significantly stronger signals were obtained when the indirect procedure was used. Both types of labeling were successfully applied to chromosomes in suspension and were shown to produce signals comparable to that obtained with chromosomes attached to coverslips. It is expected that primed in situ DNA labeling en suspension (PRINSES) will provide a basis for flow-cytometric discrimination and sorting of otherwise indistinguishable chromosomes according to their specific fluorescent labeling.     

POP-IN AND CRACK ARREST IN AN HY80 WELD

It is generally thought that, when a material is in its brittle to ductile transition, it is more difficult to design for crack arrest than to prevent crack initiation (cleavage). This report shows that this is not always true for weldments. Comparison is made between compact crack arrest (CCA), K_a, and crack tip opening displacement (CTOD), K_Jc, toughness for the same HY80 weld. The value of K_a is shown to be much higher than the minimum K_Jc for pop-in fracture initiation. It is considered that the results support the conclusion of Japanese research workers (Arimochi and Isaka) that small pop-ins (in the CTOD test) propagate and arrest without load drop. It follows that prediction of structural failure for weldments need not be based on minimum pop-in toughness from CTOD tests.