Steady-state longitudinal vibrations of sectional,physically nonlinear plates

The artile deals with steady-state longitudinal vibrations of plates consisting of curvilinear rings placed one inside the other without interference, under the effect of a harmonic distorting load acting along the outer periphery. The rings are made from different isotropic materials that are physically nonlinear. The problem is solved by the method of successive approximations. In each approximation the sought functions are represented in the form of expansions with respect to a small parameter. Numerical investigations were carried out for plates consiting of two concentrically arranged circular rings.Translated from Problemy Prochnosti, No. 3, pp. 24–27, March, 1991.     

Process and design analysis for ultrafine-pitched wiresweep elimination in advanced copper heat spreader BGA package

The semiconductor device trend for increasing functionalities and performances yet with smaller overall feature sizes presents escalating obstacles to the decreasing form factor along with demanding thermal carrying capability required at the package level. To confront this compounding issue, ultrafine-pitch wirebond interconnect coupled with thermally enhanced copper heat spreader attached to the package are introduced. However, the additional copper heat spreader thickness introduced within the package challenges the design of the package's wire, its loop height, and the molding process control to prevent wire sweeping occurrences. This study investigates the impact of different ultrafine pitched wire types, wire loop designs, copper heat spreader structures, and mold material types on eliminating device short from occurring due to the wire sweeping phenomena. A full factorial experiment is performed using an active silicon device packaged in a thermally enhanced ball grid array (BGA) test vehicle. In addition, test characterization is carried out using x-ray and multiinsertions hot/cold continuity tests. Then, a detailed failure analysis is performed by package decapsulation and scanning electron microscopy/energy-dispersive x-ray (SEM/EDX) to confirm the experimental findings. In conclusion, the study finds that for an ultrafine-pitched thermally enhanced BGA package, wire type is insignificant to reduce wire shorting occurrences. However, mold material and copper heat spreader structure using an optimized wire loop design are significant factors in eliminating wiresweep shorting phenomena. This study concludes with a wirebond interconnect and heat slug design recommended along with an improved process parameters and assembly material sets found from the experiment.     

Oil Spill Cleanup from Sea Water by Sorbent Materials

Three sorbents were compared in order to determine their potential for oil spill cleanup. Polypropylene nonwoven web, rice hull, and bagasse with two different particle sizes were evaluated in terms of oil sorption capacities and oil recovery efficiencies. Polypropylene can sorb almost 7 to 9 times its weight from different oils. Bagasse, 18 to 45 mesh size, follows polypropylene as the second sorbent in oil spill cleanup. Bagasse, 14 to 18 mesh size, and rice hull have comparable oil sorption capacities, which are lower than those of the two former sorbents. It was found that oil viscosity plays an important role in oil sorption by sorbents. All adsorbents used in this work could remove the oil from the surface of the water preferentially.     

Magnetic Resonance Visualisation of Flow and Pore Structure in Packed Beds with Low Aspect Ratio

Different NMR techniques were combined to obtain the structure and velocity information for a systematic investigation of fixed beds with low aspect ratio (tube diameter to particle diamter, d_t/d_p) in the range 1.4 to 32. The structure of the void space was determined for a variety of packed beds of glass beads or regular and irregular porous pellets by magnetic resonance imaging (MRI). Based on the images the radial distribution of the voids within the bed was obtained. Ordering effects were found even for non‐spherical and polydisperse particles, and a maximum of the fluid density near the tube wall was confirmed for all pellet geometries and sizes. By combining MRI with velocity encoding, velocity profiles and distributions of flow velocity components of a single fluid phase through packed beds have been acquired. The radial velocity distribution follows an oscillatory pattern which largely reflects the ordering of the particles, which can be accessed from the density distribution of the interparticle fluid. Maximum velocities of up to four times the average value were found to occur near the tube wall. This wall effect was observed for all but the smallest particles, where the aspect ratio was d_t/d_p = 32. Moreover, a visualisation of flow pattern in the presence of packed particles was achieved by using a tagging technique, and the stationary flow field could be identified for an experimental time of several hours.     

Synthesis of polypropylene‐graft‐maleic anhydride compatibilizer and evaluation of nylon 6/polypropylene blend properties

Polymer blends based on polyolefins are of a great interest owing to their broad spectrum of properties and practical applications. However, because of poor compatibilities of components, most of these systems generally exhibit high interfacial tension, a low degree of dispersion and poor mechanical properties. It is generally accepted that polypropylene (PP) and nylon 6 (N6) are not compatible and that their blending results in poor materials. The compatibility can be improved by the addition of a compatibilizer, and in this study PP was functionalized by maleic anhydride (MAH) in the presence of an optimized amount of dicumyl peroxide (DCP). The reaction was carried out in the molten state using an internal mixer. Then, once the compatibilizer polypropylene‐graft‐maleic anhydride (PP‐g‐MAH) was prepared, it was added at various concentrations (2.5–10 wt%) to 30/70 glass fibre reinforced N6 (GFRN6) PP, and the mechanical properties were evaluated. It was found that the incorporation of the compatibilizer enhanced the tensile properties (tensile strength and modulus) as well as the Izod impact properties of the notched samples. This was attributed to better interfacial adhesion as evidenced by scanning electron microscopy (SEM). The optimum in these properties was achieved at a critical PP‐g‐MAH concentration. Copyright © 2005 Society of Chemical Industry     

Fuzzy control of nitrogen removal in predenitrification process using ORP.

In order to meet increasingly stringent discharge standards, new applications and control strategies for the sustainable removal of nitrogen from wastewater have to be implemented. In the past years, numerous studies have been carried out dealing with the application of fuzzy logic to improve the control of the activated sludge process. In this paper, fuzzy control strategies of predenitrification systems are presented that could lead to better effluent quality and, in parallel, to a reduction of chemicals consumption. Extensive experimental investigations on lab scale plant studies have shown that there was excellent correlation between nitrate concentration and ORP value at the end of the anoxic zone. Results indicated that ORP could be used as an on-line fuzzy control parameter of nitrate recirculation and external carbon addition. The optimal value of ORP to control nitrate recirculation and external carbon addition was - 86 +/- 2 mV and - 90 +/- 2 mV, respectively. The results obtained with real wastewater also showed the good performance and stability of the fuzzy controllers independently from external disturbances. The integrated control structure of nitrate recirculation and external carbon addition in the predenitrification system is also presented.     

Nitrogen management in reservoir catchments through constructed wetland systems.

In this study, nitrogen removal was investigated in pilot-scale subsurface flow (SSF) and in free water surface flow (FWS) constructed wetlands installed in the campus of TUBITAK-Marmara Research Center, Gebze, near Istanbul, Turkey. The main purposes of this study are to apply constructed wetlands for the protection of water reservoirs and to reuse wastewater. Experiments were carried out at continuous flow reactors. The effects of the type of plants on the removal were investigated by using emergent (Canna, Cyperus, Typhia spp., Phragmites spp., Juncus, Poaceae, Paspalum and Iris.), submerged (Elodea, Egeria) and floating (Pistia, Salvina and Lemna) marsh plants at different conditions. During the study period HLRs were 30, 50, 70, 80 and 120 L m(2)d(-1) respectively. The average annual NH4-N, NO(3)-N, organic N and TN treatment efficiencies in SSF and FWS wetlands are 81% and 68%, 37% and 49%, 75% and 68%, 47% and 53%, respectively. Nitrification, denitrification and ammonification rate constant (k20) values in SSF and FNS systems have been found as 0.898 d(-1) and 0.541 d(-1), 0.488 d(-1) and 0.502 d(-1), 0.986 d(-1) and 0.908 respectively. Two types of the models (first-order plug flow and multiple regression) were tried to estimate the system performances.     

Surface topography of planar PMMA grating structures produced by the UV-laser based phase mask method

Surface relief gratings are written into the surface of a planar PMMA substrate by the UV-excimer laser based phase mask method. The surface relief grating topography (grating amplitude and grating constant) is investigated in dependence on the laser irradiation parameters (fluence and irradiation dose) yielding some information relevant for the ablation and grating formation mechanism.     

Smart help for operator performance

Our emphasis in this paper has been on the knowledge-based and cognitive issues pertinent for improved interactions between workers and manufacturing computer systems. We believe that these techniques are as necessary and applicable to manufacturing as to any other vocation, especially as the difference in collar color of shop people becomes less noticeable in their increasing role as knowledge workers.