低速走丝电火花线切割加工几种编程方法的探讨

对低速走丝电火花线切割机加工某一类工件的4种编程方法作了详尽的分析、比较，总结出一种最优化的方法，可达到减少差错，降低成本，避免重复劳动，提高生产效率的目的。     

碳化-冻融作用下钢筋混凝土梁承载力衰减分析

为了研究碳化-冻融环境对钢筋混凝土梁承载力的影响,对钢筋混凝土试验梁进行了多重循环碳化-冻融交替作用下的加速腐蚀试验,然后对完成腐蚀试验的钢筋混凝土梁进行抗弯荷载试验.通过荷载试验获得腐蚀梁的应变变化、裂缝发展及荷载位移曲线,分析碳化-冻融耦合作用对试验梁承载力衰减的影响.结果表明:荷载试验过程中腐蚀钢筋混凝土梁的跨中截面应变基本满足平截面假定,相同荷载下受腐蚀梁的跨中应变大于未腐蚀梁的应变值;与未腐蚀钢筋混凝土梁相比受腐蚀梁的裂缝出现的较早,裂缝较宽、数量较少;从试验梁的荷载-位移曲线可知同一级别荷载作用后梁体跨中位移值随碳化-冻融腐蚀周期的增加而增大,极限荷载随腐蚀周期的增加而降低.根据试验梁荷载试验的实测数据提出了钢筋混凝土梁在全寿命周期内承载力时变衰减系数的计算公式,并通过有限元模拟分析验证了其正确性,该系数可用于我国严寒区钢筋混凝土结构的承载力衰减模拟分析和评估,成果可为实际工程参考.     

APPLICATION OF THE CONSTANT MOLAR FLOW METHOD IN THE STUDY OF MASS TRANSFER OF GASES AND VAPORS IN BIDISPERSE STRUCTURED SOLIDS

In this paper, we provide exact analytical solutions for a new method of constant molar flow of pure gas into a reservoir containing solid adsorbents having a bidispersed structure, such as zeolite, activated carbon and alumina. Depending on the diffusion mechanism, two models are proposed under the isothermal conditions and linear isotherm. One is applicable to zeolite, and the other for alumina and activated carbon. The solutions of these two models are in the form of an infinite series, and its eigenvalues are determined from a transcendental equation. This transcendental equation is such that the eigenvalues are lumped into infinite but countable groups, and in each group there are infinite but countable eigenvalues. The dominant eigenvalues are generally the first ten to thirty eigenvalues (depending on the value of time at which the series is evaluated) in each group. The pressure response of the reservoir is a function of time as the result of the introduction of adsorbate into the reservoir, and as time is sufficiently large it asymptotes to a straight line, of which the slope is a function of the equilibrium parameters only and the intercept is found to be an explicit function of the equilibrium parameters as well as the diffusivities in the macropore and micropore.     

智能高分子材料的研究进展

从合成及加工制造技术、新产品开发及其应用诸方面诸方面综述了智能高分子材料，如智能高分子凝胶、形状记忆高分子材料、智能织物、智能高分子膜、智能高分子复合材料等开发的新成果，并展望了其发展前景。     

Extraction and implementation of muscle synergies in neuro-mechanical control of upper limb movement

This work faces the redundancy problem, a central concern in robotics, in a particular force-producing task by using muscle synergies to simplify the control. We extracted muscle synergies from human electromyograph signals and interpreted the physical meaning of the identified muscle synergies. Based on the human analysis results, we hypothesized a novel control framework that can explain the mechanism of the human motor control. The framework was tested in controlling a pneumatic-driven robotic arm to perform a reaching task. This control method, which uses only two synergies as manipulated variables for driving antagonistic pneumatic artificial muscles to generate desired movements, would be useful to deal with the redundancy problem; thus, suggesting a simple but efficient control for human-like robots to work safely and compliantly with humans.     

解决组合公钥共谋攻击和密钥碰撞的新方法

以解决组合公钥体制中共谋攻击和密钥碰撞问题为目的。首先,针对线性共谋攻击,提出了一种新的构造种子矩阵的方法,使得种子密钥和大于基点加法群的阶数,从而使密钥之间不能相互线性表示。其次在密钥的生产过程中,引入系数破坏了层不同和层互斥不同的关系,为解决选择共谋攻击提供了一种有效的方法,同时增强了抵御随机共谋攻击的能力。最后,在密钥产生的流程中,通过公钥对比来避免密钥碰撞,为解决密钥碰撞问题提出了一种新方法。     

应用静电纺丝法制备PZT纳米纤维薄膜

提出应用静电纺丝法制备PZT纳米纤维薄膜。研究中配制PZT溶液后再进行静电纺丝,获得了PZT纳米纤维薄膜,并且通过调整纺丝时间和沉积次数来控制纳米纤维薄膜的厚度。运用SEM对获得的热处理前后的薄膜进行了观察对比,测量其平均直径约为200 nm;运用XRD对退火后的样品进行分析,测得样品的主要成分为Pb(Zr0.52Ti0.48)O3,证明所制备的正是PZT薄膜;运用AFM测得薄膜的表面粗糙度为1.034 nm,说明该纳米薄膜材料非常的均匀整齐。     

甲基丙烯酸锌在NBR／木质素中的应用

研究了α－甲基丙烯酸锌（ＭＡＡ－Ｚｎ）对ＮＢＲ／木质素（１００／１００，质量比）硫化胶性能的影响。结果表明，加入１．５～５．０份ＭＡＡ－Ｚｎ，可提高硫化胺的１００％的定伸应力，硬度和抗压缩永久变形能力，但对其他力学性能影响甚微，经分析可知，ＭＡＡ－Ｚｎ还可以降低硫化反应活化能，提高硫化胶的交联密度和耐热老化性能。     

GIS技术在清洁小流域治理中的应用

GIS技术有便捷的数据管理、强大的空间分析和直观的三维可视化能力,在清洁小流域治理中应用GIS技术,可有效地实现海量数据管理、复杂空间分析与决策支持,为实现美丽乡村提供强大技术支撑。以河南省淅川县草庙沟小流域为例,详细介绍了利用GIS技术进行清洁小流域治理的技术路线。利用GIS技术,可在高分辨率影像上获取准确的各级汇水区、植被覆盖信息和地类信息,再结合实测水质数据和土壤、污染、降雨等调查数据,以清洁小流域示范工程技术指南为技术标准,可便捷直观地划分小流域的各治理分区、进行三维施工设计、经费测算和效益分析。因此,GIS技术的利用可有效提升清洁小流域的管理能力。     

Activities of MFI-Supported Rhenium Catalysts for the Aromatization of Methane: Effect of Cationic Form of the Inorganic Carrier

MFI type inorganic carrier was used in two different cationic forms, hydrogen and calcium respectively. MFI-supported molybdenum and rhenium catalysts were prepared. The activities of the catalysts were compared for the aromatization reaction of methane. Higher activity values were attained with the catalysts supported on HZSM-5. Aromatics were also observed with the catalysts supported on CaZSM-5, despite their deficiency in acid sites. Highly dispersed rhenium is expected to be formed with the use of the inorganic carrier in calcium form. On the other hand, lower reaction rates were observed with rhenium supported on CaZSM-5, in spite of the improved dispersion of the active rhenium species on this catalyst. This was interpreted in terms of the critical role of the acid sites in the conversion of methane to aromatics, compared to the improved dispersion of the active metal.