The structure and thermo EMF of a nanotubular carbon deposit formed in electric discharge plasma

We have studied the structure and thermo emf of a nanotubular carbon deposit formed in electric arc discharge plasma. The deposit contains flocky granules with dimensions of 15–20 μm within a 20–60 μm-thick layer on the substrate surface. This deposit is characterized by a sufficiently high thermo emf (60 μV/K) and electric conductivity (600 Ω⁻¹ m⁻¹).     

A personal computer based system used in electromyography for interpretation and reporting

Programs for rule based electromyography (EMG) interpretation and reporting are described. A number of parameters are obtained during an EMG investigation. The combination of these data leads to a neurophysiological conclusion. Knowledge from the literature, research and experience is the basis for rule development. Rules have been developed for 14 of the most commonly used classifications of an EMG. The syntax is relatively easy and the user may change the rules, add rules or apply the system for other types of data. The results are displayed in a new graphical way. The system presented here is part of an integrated EMG laboratory with administrative routines, distributed databases for storage of results and routines for automatic report generation.     

Single-Phase Permanent-Magnet Motor Analysis

A unified theoretical approach is presented for the calculation of the performance of the single-phase capacitor-start permanent-magnet (PM) ac line-start motor. The earlier work of Chang and of Finch and Lawrenson on capacitor reluctance motors is extended. As far as possible, a common set of reference frame transformations for steady-state, transient, and asynchronous performance is also provided, permitting the use of all the theory developed for the analysis of the balanced polyphase PM motor. A new approximate technique is given for estimating the average asynchronous torque/speed curve from computed acceleration curves.     

High-gain pseudomorphic InGaAs base ballistic hot-electron device

A high-gain ballistic hot-electron device is described. The GaAs-AlGaAs heterostructure device, with a 21-mm-thick pseudomorphic In _0.12Ga_0.88As base, had a current gain of 27 at 77 K and 41 at 4.2 K. As characteristically seen in ballistic devices, transfer into the L valley limited the maximum gain. The Γ-L valley separation in the strained In_0.12Ga_0.88As was estimated to be about 380 meV     

Scientific co-operation in Europe and the citation of multinationally authored papers

Under the sponsorship of the U.S. National Science Foundation, CHI Research, Inc. developed the bibliometric indicators for the U.S. National Science Board'sScience Indicators Reports starting withScience Indicators 1972. In the work reported here, for the Commission of the European Communities, CHI has extended the Science Indicators techniques and database to a study of publication, coauthorship and citation within 28 scientific fields related to various European Community programs.Perhaps the most important finding of the research was that internationally coauthored papers — papers authored by scientists affiliated with institutions in more than one EC country — were cited two times as highly as papers authored by scientists working at a single institution within a single country. These EC-EC internationally coauthored papers were cited as highly as EC-Non EC and Non-EC papers. This indicates that the internationally linked European science is of as high impact as any other science in the world.A second key finding was that, after compensating for national scientific size, the degree of international coauthorship did not appear to be particularly dependent upon size. However, linguistic and cultural factors were found to be very strong. The patterns of coauthorship amongst the European countries are far from homogeneous, and are quite heavily affected by linguistic, historical, and cultural factors.Finally, it was found that international coauthorship is increasing steadily, both within and outside of the Community, with some evidence that international cooperation is increasing more rapidly in scientific fields that have been targeted by the Commission.This work has been sponsored by the MONITOR programme of the Commission of the European Communities.     

Effects of flux enhancing polymer on the characteristics of sludge in membrane bioreactor process.

A newly developed membrane performance enhancer (MPE) was used to prevent membrane fouling in a membrane bioreactor (MBR) process. It transpired that 1,000 mg/l of MPE reduced polysaccharide levels from 41 mg/I to 21 mg/I on average under the experimental condition. Repeated experiments also confirmed that 50-1,000 mg/l of MPE could reduce membrane fouling significantly and increase the intervals between membrane cleanings. Depending on MPE dosages and experimental conditions, trans-membrane pressure (TMP) increase was suppressed for 20-30 days, while baseline TMP surged within a few days. In addition, MPE allowed MBR operation even at 50,000 mg/l of total solid and reduced permeate COD. However, no evidence of toxicity for sludge was found from respiratory works.     

Comparative Study of Different Adaptive Window Protocols

We study an Adaptive Window Protocol (AWP) with general increase and decrease profiles in the presence of window dependent random losses. We derive a steady-state Kolmogorov equation, and then obtain its solution in analytic form for particular TCP versions proposed for high speed networks, such as Scalable TCP and HighSpeed TCP. We also relate window evolution under an AWP to workload process in queueing systems; this observation gives us a way to compare various AWP protocols.     

4-bit adder-accumulator at 41-GHz clock frequency in InP DHBT technology

A 41-GHz 4-b adder-accumulator test circuit implemented in InP double heterojunction bipolar transistor (DHBT) technology using 624 transistors is reported. High clock rates are obtained by combining the logic functions into pipelined latches. The adder-accumulator contains a single-level parallel-gated carry circuit that is used as a step toward reduced power consumption. The carry circuit has a maximum clock frequency of 55 GHz. The accumulator architecture employs modular, pipelined 2-b adders and is cascadable to 2 N-bits. The test circuit includes a 4-b digital to analog converter (DAC) that facilitates demonstration of high-speed operation.     

Performance comparison of space-time block coded and cyclic delay diversity MC-CDMA systems

Spatial diversity is a widely applied technique for enhancing wireless system performance since it greatly reduces the detrimental effects of multipath fading. Space-time block codes have been considered the best choice for transmit diversity in narrowband environments, but their use in broadband channels is questionable due to their inability to pick up multipath diversity. However, when used in conjunction with an MC-CDMA system, they achieve not only full spatial but also variable multipath diversity depending on the employed spreading. In comparison, cyclic delay diversity is an attractive approach to achieve spatial and multipath diversity. Its simplicity and conformability with current standards makes it desirable for multicarrier systems. Previous studies suggest that CDD is only advantageous with an outer channel code for OFDM systems. In this article, we compare STBCs and CDD applied to an MC-CDMA system in terms of complexity and performance. It is shown that for an MC-CDMA system, CDD benefits from spreading and channel coding that makes it very competitive with STBCs, particularly since it is applicable to any number of transmit antennas with no loss in rate.     

Tile-boundary artifact reduction using odd tile size and the low-pass first convention.

It is well known that tile-boundary artifacts occur in wavelet-based lossy image coding. However, until now, their cause has not been understood well. In this paper, we show that boundary artifacts are an inescapable consequence of the usual methods used to choose tile size and the type of symmetric extension employed in a wavelet-based image decomposition system. This paper presents a novel method for reducing these tile-boundary artifacts. The method employs odd tile sizes (2N + 1 samples) rather than the conventional even tile sizes (2N samples). It is shown that, for the same bit rate, an image compressed using an odd tile length low-pass first (OTLPF) convention has significantly less boundary artifacts than an image compressed using even tile sizes. The OTLPF convention can also be incorporated into the JPEG 2000 image compression algorithm using extensions defined in Part 2 of this standard.