Application of GaN-based ultraviolet-C light emitting diodes--UV LEDs--for water disinfection

GaN-based ultraviolet-C (UV-C) light emitting diodes (LEDs) are of great interest for water disinfection. They offer significant advantages compared to conventional mercury lamps due to their compact form factor, low power requirements, high efficiency, non-toxicity, and overall robustness. However, despite the significant progress in the performance of semiconductor based UV LEDs that has been achieved in recent years, these devices still suffer from low emission power and relatively short lifetimes. Even the best UV LEDs exhibit external quantum efficiencies of only 1-2%.The objective of this study was to investigate the suitability of GaN-based UV LEDs for water disinfection. The investigation included the evaluation of the performance characteristics of UV LEDs at different operating conditions as well as the design of a UV LED module in view of the requirements for water treatment applications. Bioanalytical testing was conducted using Bacillus subtilis spores as test organism and UV LED modules with emission wavelengths of 269 nm and 282 nm.The results demonstrate the functionality of the developed UV LED disinfection modules. GaN-based UV LEDs effectively inactivated B. subtilis spores during static and flow-through tests applying varying water qualities. The 269 nm LEDs reached a higher level of inactivation than the 282 nm LEDs for the same applied fluence. The lower inactivation achieved by the 282 nm LEDs was compensated by their higher photon flux. First flow-through tests indicate a linear correlation between inactivation and fluence, demonstrating a well designed flow-through reactor. With improved light output and reduced costs, GaN-based UV LEDs can provide a promising alternative for decentralised and mobile water disinfection systems.     

Measurement of the intrinsic process zone in rock using acoustic emission

Laboratory specimens with a smooth boundary (no notch) were fabricated from four different rock types (grain sizes from 0.1–10 mm) and were tested in three-point bending. The locations of acoustic emission that occurred around peak load were used to characterize the dimensions of the region of localized microcracking, the so-called intrinsic process zone. The size of this zone was found to vary significantly between the rock types, but was not found to vary significantly for different size beams of the same material. An approximately linear relation was found between the width of the intrinsic process zone and the logarithm of the grain size. An explanation of size effect evolves naturally by considering the intrinsic process zone as a material characteristic. Two different models were used to analyze stress at failure. The first treated the intrinsic process zone as a mathematical crack, an infinite stress raiser, from which a K_IC value was calculated. The second model assumed the intrinsic process zone was a cohesive notch, a finite stress raiser, from which the theoretical tensile strength was defined. The second method seemed somewhat better at predicting size effect on nominal peak stress.     

Trace-metal concentrations in normal human liver: methods to cope with marked variability

Concentrations of trace elements in human tissues characteristically vary widely, and the distributions of most concentrations are skewed to the right. Examination of some of the factors which contribute to the marked variability and skewness of the concentrations revealed that: (1) distributions of concentrations are satisfactorily normal (Gaussian) after logarithmic transformation, (2) ash weight is the best frame of reference in which to report results, (3) the distributions of metal concentrations are not further normalized by adjustments which assume that tissue lipid or collagen contains a fixed fraction of the metal found in the parenchyma, and (4) the choice of sample site within the liver is of minimal significance.     

Method for detecting moment connection fracture using high-frequency transients in recorded accelerations

The 1994 Northridge earthquake caused brittle fractures in steel moment frame building connections, despite causing little visible building damage in most cases. Future strong earthquakes are likely to cause similar damage to the many un-retrofitted pre-Northridge buildings in the western US and elsewhere. Without obvious permanent building deformation, costly intrusive inspections are currently the only way to determine if major fracture damage that compromises building safety has occurred. Building instrumentation has the potential to provide engineers and owners with timely information on fracture occurrence. Structural dynamics theory predicts and scale model experiments have demonstrated that sudden, large changes in structure properties caused by moment connection fractures will cause transient dynamic response. A method is proposed for detecting the building-wide level of connection fracture damage, based on observing high-frequency, fracture-induced transient dynamic responses in strong motion accelerograms. High-frequency transients are short (<1 s), sudden-onset waveforms with frequency content above 25 Hz that are visually apparent in recorded accelerations. Strong motion data and damage information from intrusive inspections collected from 24 sparsely instrumented buildings following the 1994 Northridge earthquake are used to evaluate the proposed method. The method’s overall success rate for this data set is 67%, but this rate varies significantly with damage level. The method performs reasonably well in detecting significant fracture damage and in identifying cases with no damage, but fails in cases with few fractures. Combining the method with other damage indicators and removing records with excessive noise improves the ability to detect the level of damage.     

In situ dialysis for the determination of the state of trace elements in natural waters

A new method is described which enables determination of the concentration of truly dissolved forms of trace elements in natural waters without substantial influence of adsorption on the walls of apparatus and vessels. The method also simplifies further analysis of the ionic and molecular forms of trace elements. It consists in immersing a dialysis bag, filled with pure water, directly into the natural water in situ and allowing the dialysis and adsorption equilibriu to be established. Conditions for the use of this method are discussed and results of the determination of the dissolved fraction of 20 elements in river water, as compared with the results by filtration and ultrafiltration are presented. Neutron activation analysis was used for the elemental determinations.     

Development of passive viscoelastic damper to attenuate excessive floor vibrations

Recent changes in the construction of building floors have included the use of light material composite systems and long span floor systems. Although these changes have many advantages, such floor systems can suffer from excessive vibration due to human activities. This problem is exacerbated in office buildings due to the reduction in inherent damping associated with modern fit outs. Excessive floor vibrations are often realised after the completion of construction or following structural modifications and normally arise due to inadequate knowledge of the damping values in the design process. Thus rectification measures are normally required to reduce floor accelerations. This paper proposes a new innovative passive viscoelastic damper to reduce floor vibrations. This damper can be easily tuned to the fundamental frequency of the floor and can be designed to achieve various damping values. The paper discusses the analytical development of the damper with experimental results presented on a prototype to demonstrate its effectiveness.     

Seismic methods for study of soil building properties

Bulletin of Engineering Geology and the Environment - Information about distribution of elastic wave propagation velocities Vp, Vs in the subsurface zone of a soil mass can be obtained rapidly and...     

Large bending of pipes

The computer model developed has been used successfully for studying the large pipe-bending problem frequently encountered in offshore structural engineering. The pipe-soil interaction is modelled by using the Coulomb friction law. The modified finite element approach coupled with a modified tangent stiffness procedure is used to handle the nonlinearities (geometric and material, etc.) in the problem. The material nonlinearity has been considered both by the plastic-hinge method and by an elastic-plastic method. Before studying the practical problems, sufficient check problems were analysed and a good agreement was found between theoretically exact solutions and the results obtained from the developed computer model.     

On the shear strength of reinforced concrete deep beam with web opening

An objective of this study is to establish the shear strength of reinforced concrete deep beam with web opening. Eighteen beams were tested with the variables of the steel ratio and strength of longitudinal bars, concrete strength, and shear span‐to‐depth ratio. It was observed that the opening is strengthened by longitudinal bars but the load‐carrying capacity of deep beams with openings can be largely improved by the increase in concrete strength. Modifying the softened truss model derived by Mau and Hsu and utilizing the results of this experiment carried out with the variables of concrete strength, cross‐section size, shear‐span‐to‐depth ratio, and the strength and steel ratio of longitudinal bars, this study proposes an improved model to predict the shear strength. Copyright © 2006 John Wiley & Sons, Ltd.     

Technique for measuring metallic salt effects upon the indigenous heterotrophic microflora of a natural water

The effects of several concentrations of the metallic salts Ag₂SO₄, NaAsO₃, BaCl₂2H₂O, CdCl₂2.5 H₂O, CrCl₂6H₂O, CuCl₂, HgCl₂, NaCl, NiCl₂6H₂O, PbCl₂ and ZnCl₂ upon the indigenous heterotrophic microflora of a natural water were studied. Effects of these salts upon the heterotrophic activity of the microbes were assayed using the heterotrophic technique whereas lethal effects upon the heterotrophic bacteria were determined using nutrient agar plate counts. The heterotrophic activity method is based upon the uptake and mineralization of a radioactively labeled metabolite (in these experiments ¹⁴C-glucose) by the indigenous aquatic microbes and data analysis is by Michaelis—Menten enzyme kinetics equations. Concentrations of metallic salts which resulted in bacterial death also caused erratic uptake and mineralization rates of ¹⁴C-glucose whereas sub-lethal concentrations, as determined by nutrient agar plate counts, caused a non-competitive inhibition of maximum heterotrophic activity and markedly increased the turnover time of the glucose substrate.