预加重与MMSE 结合的语音增强方法

基于语音周期性的特点,提出了一种预加重的MMSE语音增强的改进算法.首先,算法在尽量保留语音信息基础上对带噪语音预加重,使信噪比提高.预加重过程将根据带噪语音信号的周期性的强弱对信号动态加权.处理结果再作为MMSE语音增强的输入并将有利于提高最终的去噪效果.     

Optimal shape design as a material distribution problem

Shape optimization in a general setting requires the determination of the optimal spatial material distribution for given loads and boundary conditions. Every point in space is thus a material point or a void and the optimization problem is a discrete variable one. This paper describes various ways of removing this discrete nature of the problem by the introduction of a density function that is a continuous design variable. Domains of high density then define the shape of the mechanical element. For intermediate densities, material parameters given by an artificial material law can be used. Alternatively, the density can arise naturally through the introduction of periodically distributed, microscopic voids, so that effective material parameters for intermediate density values can be computed through homogenization. Several examples in two-dimensional elasticity illustrate that these methods allow a determination of the topology of a mechanical element, as required for a boundary variations shape optimization technique.     

A micropower analog-digital heart rate detector chip

A micropower detector chip integrated with CMOS technology has been developed for a hand-held heart rate monitoring instrument mainly used by professional athletes and others who exercise seriously to increase their endurance and overall performance. The chip uses linear bandpass filtering and threshold detection and is implemented with analog switched-capacitor (SC) and digital techniques. The bandpass filter transfer function is derived from the spectral contents of noisy ECG signals. The layout was designed in full custom style in order to minimize the silicon area. The chip achieves a detection rate of 90% with a simulated ECG signal corrupted with Gaussian noise (signal-to-noise ratio = 5) in the heart rate range 60-200 1/min with a total current consumption of less than 30µA from a 3-V supply. The detection rate is 96.9% for a noisy signal obtained from the MIT-BIH arrhythmia database.     

Designing on-site: Facilitating participatory contextual architecture with mobile phones

Some movements within modern architecture particularly emphasise the importance of matching buildings to their surroundings. However, practicing such “contextual architecture” is highly challenging and typically not something the future inhabitants of a building are well equipped for participating in. This paper explores the potentials of using mobile phone technology for facilitating such client participation in the parts of an architecture process that take place on the building site. For this we introduce ArchiLens, a mobile system for interactive on-site 3D visualisation of houses, and findings from a field study with 40 participants in the process of building or modifying their home. The study showed that using the system helped evoke people’s imagination of the look and feel of their future house, and envision it in context. This enabled them to participate more closely in the design process on-site by iteratively reviewing design alternatives and exploring, for example, other placements and materials.     

Where does model-driven engineering help? Experiences from three industrial cases

There have been few experience reports from industry on how Model-Driven Engineering (MDE) is applied and what the benefits are. This paper summarizes the experiences of three large industrial participants in a European research project with the objective of developing techniques and tools for applying MDE on the development of large and complex software systems. The participants had varying degrees of previous experience with MDE. They found MDE to be particularly useful for providing abstractions of complex systems at multiple levels or from different viewpoints, for the development of domain-specific models that facilitate communication with non-technical experts, for the purposes of simulation and testing, and for the consumption of models for analysis, such as performance-related decision support and system design improvements. From the industrial perspective, a methodology is considered to be useful and cost-efficient if it is possible to reuse solutions in multiple projects or products. However, developing reusable solutions required extra effort and sometimes had a negative impact on the performance of tools. While the companies identified several benefits of MDE, merging different tools with one another in a seamless development environment required several transformations, which increased the required implementation effort and complexity. Additionally, user-friendliness of tools and the provision of features for managing models of complex systems were identified as crucial for a wider industrial adoption of MDE.     

Makerspaces on Social Media: Shaping Access to Open Design

Open Design is an emerging area of research that seeks to connect and extend the culture of making, social innovation, open-source software, and open-source hardware. A cornerstone for Open Design is to broaden participation in technology innovation by allowing people to use and contribute to publicly shared resources. Makerspaces are important access points to share and contribute to these resources. However, prior to entering the physical door of a makerspace, makerspaces’ social media presence serve as the ‘front door’ for Open Design activities. In this paper, we examine different ‘front doors’ of Open Design, asking: What are the characteristics that produce makerspaces’ social media presences, and how do these representations shape potential access to Open Design activities? We manually collected and qualitatively analyzed 500 public posts on the Facebook sites of five makerspaces in Copenhagen, Denmark. By choosing the same geographical area, we were able to explore the characteristics of makerspaces’ social media presences for the same potential population of Open Design participants. Our analysis identifies three main characteristics of makerspaces’ social media presence, which together shape access to Open Design activities, namely reach, transparency, and discourse. The display of these characteristics produce openness and availability in unique ways, and is constitutive for how Open Design activities are produced online. In this paper, we do not argue for or against specific social media representations. Instead, we argue that the specificities and differences between makerspaces’ social media presences in the same geographical region have the strength of producing different identities across spaces, allowing for a broader definition and potential participation in Open Design.     

Bending diamonds by femtosecond laser ablation

We present a new method based on femtosecond laser ablation for the fabrication of statically bent diamond crystals. Using this method, curvature radii of 1 m can easily be achieved, and the curvature obtained is very uniform. Since diamond is extremely tolerant to high radiation doses, partly due to its densely packed lattice, such bent crystals are optimal solutions for crystal-based collimation and/or extraction. Furthermore, using interlaced ablation on both sides, the technique opens for the possibility of constructing a crystalline undulator based on the best material known, to approach the enormous beam densities required for lasing operation of such a device.     

EVALUATION OF BIOGENIC AMINES FORMATION BY PROTEOLYTIC ENTEROCOCCI STRAINS ISOLATED FROM RAW DROMEDARY MILKS FROM SOUTHERN ALGERIA

Twenty-three strains of lactic acid enterococci isolated from dromedary raw milks in Southern Algeria were investigated for their proteolytic activity and ability to produce biogenic amines by decarboxylating amino acids: histidine, tyrosine and ornithine. All strains tested displayed proteolytic activities, but none of them were able to produce detectable biogenic amines in the usual adequate laboratory media, namely, Joosten and Northolt medium and Leuschner medium. Polymerase chain reaction experiments indicate a positive correlation between the absence of the hdc and odc genes and the lack of histamine and putrescine production for all tested strains. By contrast, all strains appeared to possess tdc gene, but no correlation was found with a negative expression of tyrosine decarboxylase.

PRACTICAL APPLICATIONS

In foods, biogenic amines are mainly generated by decarboxylation of the corresponding amino acids through substrate-specific enzymes of the microorganisms present in this environment, particularly histidine, tyrosine, lysine, ornithine and arginine, and the capability of enterococci and some other lactic acid bacteria to produce biogenic amines has been described. For this purpose, several qualitative and quantitative methods to determine biogenic amines production by these microorganisms have been developed. There is great interest to identify and to characterize the bacteria strains intended for an industrial use and to verify if they are potentially able to produce biogenic amines in order to prevent it's synthesis and limit the poisoning risk.     

Quasi‐Static Single‐Component Hybrid Simulation of a Composite Structure with Multi‐Axis Control

This paper presents a quasi‐static hybrid simulation performed on a single component structure. Hybrid simulation is a substructural technique, where a structure is divided into two sections: a numerical section of the main structure and a physical experiment of the remainder. In previous cases, hybrid simulation has typically been applied to structures with a simple connection between the numerical model and physical test, e.g. civil engineering structures. In this paper, the method is applied to a composite structure, where the boundary is more complex i.e. 3 degrees of freedom. In order to evaluate the validity of the method, the results are compared to a test of the emulated structure – referred to here as the reference test. It was found that the error introduced by compliance in the load train was significant. Digital image correlation was for this reason implemented in the hybrid simulation communication loop to compensate for this source of error. Furthermore, the accuracy of the hybrid simulation was improved by compensating for communication delay. The test showed high correspondence between the hybrid simulation and the reference test in terms of overall deflection as well as displacements and rotation in the shared boundary.