Cathodic decolourisation of textile waste water containing reactive dyes using a multi‐cathode electrolyser

The reductive decolourisation of textile dyestuffs containing an azo group was investigated by direct cathodic electron transfer CI Acid Red 27 and CI Acid Yellow 9 were used as model compounds for azo dyes. Reactive dyes, eg CI Reactive Red 4, CI Reactive Orange 4, and CI Reactive Black 5, which are in technical use for cellulose dyeing were investigated as representatives of practical importance. A basic characterisation of the reduction–decolourisation behaviour of the dyes was achieved by redox titration with Fe(II)–triethanolamine as reducing agent and parallel spectrophotometric observation of changes in the chromogenic system. From the redox titration experiments basic data describing the experimental conditions for successful cathodic electron transfer can be derived. The electrochemical dyestuff reduction experiments were performed in batch trials using a multi‐cathode electrolyser with high cathode area. According to the typical composition of such dyebaths 0.12 mol dm^?3 NaOH was used as ground electrolyte. The absorbance of the investigated dyestuff solutions could be decreased to below 20% of the initial value. For a 50% decrease in absorbance, electrical energy of about 6 kWh m^?3 is consumed. The process is of particular interest for the treatment of concentrated dyestuff solutions as they are used in continuous dyeing processes. © 2001 Society of Chemical Industry     

车站郊区的重新阐释，海尔布隆，德国

建筑师:英格·勒克,ASIR建筑师事务所设计团队:JensBeck,HannavonderKall,AndreasMaedche客户:Kruck Partner,海尔布隆设计时间:2003年-2005年建筑面积:386m2这个靠近火车站的地区被称为车站郊区,它的特征是二战带来的破坏。尽管这一地区充斥着战后的建筑,然而都缺少可以提示战前丰富建筑遗产的历史标记。随着地域性火车系统的实施,这一地区出现新的居住需求。Achtung街的新住宅位于历史上两个城市建筑类型之间,一个是典型的住宅区,一个是工厂建筑,要寻求新的途径对其邻里的类型进行重新解释。市区别墅在历史建筑的环境中占据一席之地…     

Charakterisierung und Qualitätssicherung von Oberflächenvorbehandlungen auf Kunststoffbauteilen

With the aim of increasing wetting, adhesion, and long-term stability usually surface pretreatments are carried out on plastic surfaces for subsequent painting and bonding processes. Depending on the treatment methods, materials and subsequent processing steps, a variety of characterization methods are available. An overview is given of established characterization options for activated plastic surfaces, which are suitable for adjusting processes or quality assurance. In addition, new promising research approaches for two-dimensional and non-destructive quality control of activated plastic surfaces are discussed.     

Lactose-free skim milk and prebiotics as carrier agents of Bifidobacterium BB-12 microencapsulation: physicochemical properties,survival during storage and in vitro gastrointestinal condition behaviour

Bifidobacterium BB-12 was microencapsulated by spray drying using lactose-free milk, lactose-free milk and inulin, and lactose-free milk and oligofructose, resulting in powders 1, 2 and 3, respectively. The highest encapsulation yield (88.01%) and the highest bifidobacteria viability during 120 days of storage were noted for spray-dried powder 2. Spray-dried powders 1 and 3 show a higher tendency to yellow colour. After being submitted to in vitro-simulated gastrointestinal conditions, the best probiotic survival rate result was found for spray-dried powder 3 (87.59%). Therefore, spray-dried powders containing prebiotics were the most appropriate combinations for microencapsulation of Bifidobacterium BB-12 and maintenance of cell viability during storage and gastrointestinal system, showing great potential to be used in lactose-free dairy products.     

Defects in Hybrid Perovskites: The Secret of Efficient Charge Transport

The interaction of free carriers with defects and some critical defect properties are still unclear in methylammonium lead halide perovskites (MHPs). Here, a multi-method approach is used to quantify and characterize defects in single crystal MAPbI₃, giving a cross-checked overview of their properties. Time of flight current waveform spectroscopy reveals the interaction of carriers with five shallow and deep defects. Photo-Hall and thermoelectric effect spectroscopy assess the defect density, cross-section, and relative (to the valence band) energy. The detailed reconstruction of free carrier relaxation through Monte Carlo simulation allows for quantifying the lifetime, mobility, and diffusion length of holes and electrons separately. Here, it is demonstrated that the dominant part of defects releases free carriers after trapping; this happens without non-radiative recombination with consequent positive effects on the photoconversion and charge transport properties. On the other hand, shallow traps decrease drift mobility sensibly. The results are the key for the optimization of the charge transport properties and defects in MHP and contribute to the research aiming to improve perovskite stability. This study paves the way for doping and defect control, enhancing the scalability of perovskite devices with large diffusion lengths and lifetimes.     

Polymorphic fingerprint as an approach to authenticate Iberian pig categories

High-commercial-value products are often susceptible to food fraud. Among them, Iberian dry-cured ham is highly appreciated due to its particular and sensory, but also nutritional, properties. There are four different Iberian ham categories (namely bellota, recebo, cebo de campo and cebo), which directly depend on the rearing system of the pig during the last stage of the fattening phase. However, there is still a lack of a normalized and robust method capable of authenticating the different product categories and, therefore, preventing mislabeling. In the present work, we characterized the polymorphic behavior of raw (before curing) lipid extracts belonging to the four categories of Iberian pig. A total of 80 different samples were analyzed by DSC, and synchrotron radiation XRD experiments were carried out for selected ones. The results obtained showed that bellota and recebo categories exhibited essentially the same crystallization and polymorphic behavior and this was significantly different (p < 0.05) from that of cebo de campo and cebo. The latter exhibited higher crystallization and melting temperatures than bellota and recebo samples, due to the occurrence of an additional β′-2L polymorphic form. By considering the differences in rearing systems of pigs belonging to the different categories, we concluded that the key factor which determined the polymorphism of Iberian pig lipid extracts was not the physical exercise practiced by the pig, but the inclusion of acorns in the feeding system. This work demonstrated that thermal and crystallographic techniques, like DSC and XRD, may be promoted to be used as fingerprinting tools for the authentication of high-value food products.     

Kinetic aspects of concentration of solid nanoparticles at the interface in polystyrene–polyethylene mixtures

The effect of several mixing process parameters on the concentration of carbon black particles at the interface between the polymer components in polyethylene–polystyrene mixtures was studied. It was established that the process of particle transport from the polymer phase to the interface happens only under the action of shear deformation, but simultaneously acting shear stresses prevent particle concentration. The nanoparticle accumulation at the interface is determined not only by how favored this process is thermodynamically, but also by the parameters of the mixing process. The filler concentration at the interface is facilitated by a reduction in the shear stress, polymer viscosity, filler particle size, and preliminary injection of filler into the polymer component that is less effective at wetting the filler surface. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48585.     

Visual Analytics in Dental Aesthetics

Dental healthcare increasingly employs computer-aided design software, to provide patients with high-quality dental prosthetic devices. In modern dental reconstruction, dental technicians address the unique anatomy of each patient individually, by capturing the dental impression and measuring the mandibular movements. Subsequently, dental technicians design a custom denture that fits the patient from a functional point of view. The current Workflow does not include a systematic analysis of aesthetics, and dental technicians rely only on an aesthetically pleasing mock-up that they discuss with the patient, and on their experience. Therefore, the final denture aesthetics remain unknown until the dental technicians incorporate the denture into the patient. In this Work, we present a solution that integrates aesthetics analysis into the functional Workflow of dental technicians. Our solution uses a video recording of the patient, to preview the denture design at any stage of the denture design process. We present a teeth pose estimation technique that enables denture preview and a set of linked visualizations that support dental technicians in the aesthetic design of dentures. These visualizations assist dental technicians in choosing the most aesthetically fitting preset from a library of dentures, in identifying the suitable denture size, and in adjusting the denture position. We demonstrate the utility of our system with four use cases, explored by a dental technician. Also, we performed a quantitative evaluation for teeth pose estimation, and an informal usability evaluation, with positive outcomes concerning the integration of aesthetics analysis into the functional Workflow.     

“Oh,Dignity too?” Said the Robot: Human Dignity as the Basis for the Governance of Robotics

Minds and Machines - Healthcare robots enable practices that seemed far-fetched in the past. Robots might be the solution to bridge the loneliness that the elderly often experience; they may help...     

Aerodynamic performance of a dual turbine concept characterized by a relatively close distance between rotors

In this work, a closely spaced dual turbine concept is studied. The distance between the two side-by-side hubs is 1.05 $D$, where $D$ is the rotor diameter. This configuration has a potential benefit for offshore wind developments in which power density can be maximized. The main goal is to evaluate the overall aerodynamic performance, blade loads, and wake structure of a reference wind turbine generator operating within this dual turbine configuration and to compare the effects against those for the typical single turbine configuration. For this purpose, an actuator line model has been employed together with the large eddy simulation approach for predicting the turbulence effects. This model was implemented by using the open-source computational fluid dynamics toolbox OpenFOAM. Results show a better performance for the dual turbine concept. Under same operating conditions, the aerodynamic power of each turbine within the dual concept is higher than the power of the stand alone turbine, particularly at lower operating wind speeds (approximately 2% to 3% of extra power per turbine). Comparison between the two configurations shows similar character of the tangential and normal forces acting on the blades in terms of magnitude and fluctuation, eliminating potential concerns regarding fatigue and blade design. The largest difference in the tangential and normal root bending moments are approximately 3% and 2%, respectively, between single and dual turbine configurations. Finally, wake recovery analysis shows a downwind velocity deficit that is not enhanced streamwise in the dual turbine configuration with no considerable difference after 7 $D$.