Toward the biomimetic implant surface: Biopolymers on titanium-based implants for bone regeneration

Replacing malfunctioning tissues with titanium-based implants has become a widespread practice spurred by population aging. Advances in biomaterials, technology and implantation protocols have led to increasing expectations on the applicability and durability of implants. The field has recently moved from a bioinert to a bioactive paradigm due to surface modifications that trigger specific responses on the surrounding tissues. Biopolymeric surface coatings have taken up a central role in these developments. The use of these and other biomimetic strategies on implants provides greater control over material–cell interactions and it is aimed at improving long-term clinical results by replicating some of the structures and mechanisms of living tissues. This review summarizes the state of the art of biomimetic implants and discusses the main directions and challenges of this field toward a more predictable and successful implant osseointegration.     

Herbivore Defence Compounds Occur in Pollen and Reduce Bumblebee Colony Fitness

Herbivory defence chemicals in plants can affect higher trophic levels such as predators and parasitoids, but the impact on pollinators has been overlooked. We show that defensive plant chemicals can damage pollinator fitness when expressed in pollen. Crop lupins (Lupinus species from Europe and South America) accumulate toxic quinolizidine alkaloids in vegetative tissues, conferring resistance to herbivorous pests such as aphids. We identified the alkaloid lupanine and its derivatives in lupin pollen, and then provided this compound at ecologically-relevant concentrations to queenless microcolonies of bumblebees (Bombus terrestris) in their pollen to determine how foraging on these crops may impact bee colony health and fitness. Fewer males were produced by microcolonies provided with lupanine-treated pollen and they were significantly smaller than controls. This impact on males was not linked to preference as workers willingly fed lupanine-treated pollen to larvae, even though it was deleterious to colony health. Agricultural systems comprising large monocultures of crops bred for herbivore resistance can expose generalist pollinators to deleterious levels of plant compounds, and the broader environmental impacts of crop resistance must thus be considered.     

Turbidimetric and intrinsic viscosity study of EVA copolymer–solvent systems

Both Hansen solubility parameter and Flory–Huggins interaction parameter of two EVA [Poly(ethylene-co-vinyl acetate)] copolymers with different vinyl acetate content have been obtained by means of intrinsic viscosity measurements. To calculate this last parameter it was also necessary to determine the theta solvent at different temperatures of the two EVA copolymers with turbidimetric measurements. The results indicate that the vinyl acetate content is a variable which influences the composition of the theta solvent and Flory–Huggins parameter (the higher the vinyl acetate content, the lower the Flory–Huggins parameter), although its influence over the Hansen solubility parameter is almost negligible.     

SHS-produced Fe-(TiMo)C master alloy for reinforcement of manganese steel

Some steels and alloys, such as the austenite of Hadfield-type manganese steels, are very ductile, tough, and deformable, so that the industrial parts made of these materials often suffer marked geometric deformations during their service life. The problem can be resolved by reinforcing the austenitic matrix with hard, microscopically dispersed ceramic particles such as TiC. Titanium monocarbide, TiC, very hard and stable at room/high temperatures, can be readily fabricated by SHS from elementary Ti-C powders as raw materials. However, these ceramic products are prone to coalescence and have poor wettability in a molten bath, so that the product yield and subsequent property improvement are very low. These drawbacks have been overcome by synthesizing the Fe-(TiMo)C master alloy, that is, (TiMo)C complex carbide particles embedded into a metallic (Fe) matrix, which will significantly improve the mechanical properties of final product. Another goal of this work is substituting expensive raw materials (titanium, molybdenum, and iron powders) by low-cost FeTi and FeMo alloys. The results showed that manganese steels can be successfully reinforced with particles of the SHS-produced master alloy. It has been proved that the use of FeTi and FeMo for the synthesis of master alloy not only satisfies all technical requirements but also significantly reduces the production cost, thus satisfying rigorous economical needs.     

Application of double pulse theory for hemispherical microelectrodes to the experimental study of slow charge transfer processes

Differential Pulse Voltammetry and Reverse Pulse Voltammetry are applied to the study of the electrode kinetics of slow charge transfer processes at hemispherical microelectrodes of ca. 25 μm radius. The electrochemical reversibility of three redox systems: 3-nitrophenolate^−/2−, 3-nitrophthalate^2−/3− and europium^3+/2+, are evaluated with both techniques by determining the heterogeneous rate constant, the electron transfer coefficient as well as the formal potential for each.The experimental results show the value of these techniques for the characterization of the electrode kinetics by means of simple diagnostic criteria and single-point fit to general working curves. Further, theory developed for double potential pulse under radial diffusion conditions is validated.     

Fischer-Tropsch synthesis and the generation of DME in situ

Ternary physical mixtures comprised a Fischer-Tropsch catalyst, a methanol synthesis catalyst and a zeolite employed in the hydrocarbon synthesis from syngas. Two Fe-based catalysts (i.e., one promoted by K and the other by Ru), two HY zeolites with different acidities, a commercial HZSM-5 and Cu/ZnO/Al₂O₃ (methanol synthesis catalyst) were used in these systems. The main products obtained were dimethyl ether, methanol and hydrocarbons. First of all, it was observed that by adding Cu/ZnO/Al₂O₃ catalyst to a binary physical mixture comprised of a Fischer-Tropsch catalyst and HZSM-5, the CO conversion increases more than 20 times. Second, during the reaction transient period the dimethyl ether selectivity decreases as the conversion increases. Third, the hydrocarbons synthesized followed the ASF distribution in the C₁-C₁₂ range and finally, it was also verified that the Y zeolites and the Fischer-Tropsch synthesis catalyst promoted by Ru generated the most active physical mixtures. The results showed that the role of zeolites in the ternary physical mixture is only associated with the dimethyl ether synthesis. The following reaction pathway was suggested: first, methanol is synthesized from syngas using Cu/ZnO/Al₂O₃ catalyst; after that, this alcohol is dehydrated by an acid catalyst generating DME; and lastly, DME initiates Fischer-Tropsch synthesis, which is then propagated by CO.     

Exposure to sodium fluoride produces signs of apoptosis in rat leukocytes

Fluoride is naturally present in the earth's crust and can be found in rocks, coal, and clay; thus, it can be found in small quantities in water, air, plants, and animals. Therefore, humans are exposed to fluoride through food, drinking water, and in the air they breathe. Flouride is essential to maintain bone strength and to protect against dental decay, but if it is absorbed too frequently, it can cause tooth decay, osteoporosis, and damage to kidneys, bones, nerves, and muscles. Therefore, the present work was aimed at determining the effect of intake of sodium fluoride (NaF) as an apoptosis inducer in leukocytes of rats treated for eight weeks with 1 or 50 parts per million (ppm) NaF. Expression of p53, bcl-2, and caspade-3 were used as apoptotic and general metabolism indicators of leukocyte-like indicators of the (INT) oxidation system. Male rats were exposed to NaF (1 and 500 ppm) for eight weeks, and then sacrificed weekly to obtain blood samples. Expression of p53, bcl-2, and caspase-3 were determined in leukocytes by Western blot, and general metabolism of leukocytes was analyzed with a commercial kit. We found changes in the expression of the proteins described, especially when the animals received 50 ppm of NaF. These results indicate that NaF intoxication can be an apoptosis inducer in rat leukocytes treated with the compound for eight weeks.     

Simultaneous determination of carbohydrates, carboxylic acids, alcohols, and metals in foods by high-performance liquid chromatography inductively coupled plasma atomic emission spectrometry

The applicability of the HPLC-ICP-AES coupling for the simultaneous determination of carbohydrates, carboxylic acids, alcohols, and metals in a single chromatographic run has been demonstrated in the present work. Five saccharides, glucose, fructose, sucrose, sorbitol, and lactose; five carboxylic acids, citric, tartaric, malic, lactic, and acetic; and three alcohols, glycerol, ethanol, and methanol, have been determined. A H+ cation exchange column has been used to separate these compounds. The chromatograms have been obtained by monitoring the carbon emission signal at 193.09 nm. The results obtained by HPLC-ICP-AES have been compared against those found with conventional detection systems (i.e., refractive index, UV, and photodyode array detectors). The HPLC-ICP-AES method has shown the following features: (i) organic compounds and metals can be simultaneously determined; (ii) the detection method is universal; (iii) for nonvolatile organic compounds, a complete calibration line can be obtained from a single injection; and (iv) it provides absolute limits of detection similar to or lower than those found with conventional detection systems (i.e., on the order of several tens of nanograms of organic compound). The methodology has been validated through the analysis of food samples such as juices, isotonic beverages, wines, and a certified nonfat milk powder sample.     

Development of a flashlamp-pumped Cr:LiSAF laser operating at 30 Hz

Cr3+:LiSrAlF6 crystals are an interesting laser medium because of their spectroscopic characteristics: They present a broad emission band in the near infrared and can be pumped either by a flashlamp or by diodes. Up to now, their limitation has been mostly due to their poor thermal properties that limit the laser performance either in the repetition rate in a pulsed system or output power in cw systems. We have designed and constructed a flashlamp-pumped laser using a standard rod pumping cavity that avoids most of the heat generated in the pumping process and allows operation at a fairly high repetition rate of 30 Hz with a high average power of 20 W in a conservative operation mode.     

Ionisation density dependence of the optically and thermally stimulated luminescence from Al2O3:C

This paper presents an overview of recent results on ionisation density dependence of the thermally stimulated luminescence (TL) and optically stimulated luminescence (OSL) signals from Al2O3:C, with emphasis on the sensitivity, efficiency, shape of the TL/OSL curves and the emission spectrum. High-ionisation densities are created uniformly by accumulated high doses of low-linear energy transfer radiation (gamma, beta, X rays) or non-uniformly in heavy charged particle tracks, even at low fluences, as in the case of space radiation fields. Significant deep trap filling, which occurs at these high-ionisation densities, ultimately results in changes in the concentration of recombination centres (F+-centres) and, consequently, in sensitivity changes and other effects. An OSL emission band at 335 nm has been observed in addition to the main F-centre luminescence band, and the relative intensities of these bands have been observed to be dependent on the ionisation density. The implications of these results and open issues are discussed.