Fatigue and quasi-static analysis of a new type of surface preparation used for the CFRP repair of steel offshore structures

ABSTRACT

In recent years, there has been an increasing interest in repairing offshore steel structures by using adhesively joined carbon fiber reinforced polymers (CFRP). For such procedure, surface preparation plays a vital role to maintain the integrity of the joint and to ensure proper load transfer. The primary surface preparation used by the oil and gas industry is the grit blasting due to its known quality. However, the logistic required is a major drawback limiting the use of adhesively joined repairs. Other surface preparation procedures available are unable to promote proper treatment. In this paper, an alternative surface preparation methodology employing a portable machine that uses rotation and impact to treat the steel surface was evaluated by quasi-static and fatigue tests of CFRP/steel adhesively bonded using the double-lap joints. The joints were prepared using non-corroded and severely corroded steel surfaces treated by grit blasting or rotating impact machine. The corroded plate was used to evaluate the efficiency of the rotating impact machine in removing deeply penetrating oxides. Test results showed that the performance of the machine was comparable to grit blasting even for the severely corroded surface with deep pitting. Corrosion in the metallic substrate impaired the quasi-static and fatigue properties.     

Carbon nanofibres and activated carbon nanofibres as electrodes in supercapacitors

Carbon nanofibres have been prepared by a floating catalyst procedure at industrial scale in a metallic furnace. The nanofibres (50-500 nm diameter and 5-200 μm length) are grown from the Fe particles used as catalyst. Soot appears together with the carbon nanofibres. The sample has been chemically activated using KOH as activating agent. Scanning electron microscopy has shown a smooth surface for the as-prepared carbon nanofibres but a rough surface for the activated ones. The specific surface area increases from 13 to 212 m²/g due to the activation. The volume of the micropores (in the 1-2 nm range) and the mesopores (2-5 nm range), as deduced by density functional theory methods, also increases after the activation. Electrochemical behaviour of the as-prepared and activated carbon nanofibres has been tested in a supercapacitor at laboratory scale using 6 M KOH aqueous solution as electrolyte. The specific capacitance, which is less than 1 F/g for the as-prepared sample, increase up to ≈60 F/g for the activated sample. Only a slight decrease in capacitance has been observed as the current density increases. Specific power of ≈100 W/kg at specific energy of 1 Wh/kg has been found in some particular cases. We have compared the electrochemical parameters of our activated carbon nanofibres with those of activated carbon nanofibres coming from a commercial sample; the latter was activated by the same way as our sample.     

Off-line optimization and control for real time integration of a three-phase hydrogenation catalytic reactor

In order to develop and test the integration procedure, in this paper a real time process integration involving the optimization and control of the process is presented, in this case, with the two-layer approach. The used optimization algorithms were Levenberg–Marquardt and SQP that solve a non-linear least square problem subject to bounds on the variables. The two-layer approach is a hierarchical control structure where an optimization layer calculates the set points and manipulated variables to the advanced controller, which is based on the dynamic matrix control with constraints (QDMC). The non-isothermal dynamic model of the three-phase slurry catalytic reactor with appropriate solution procedure was utilized in this work (Vasco de Toledo, E. C., Santana, P. L., Maciel, M. R. W., & Maciel Filho, R. (2001). Dynamic modeling of a three-phase catalytic slurry reactor. Chemical Engineering Science, 56, 6055–6061). The model consists on mass and heat balance equations for the catalyst particles as well as for the bulk phases of gas and liquid. The model was used to describe the dynamic behavior of hydrogenation reaction of o-cresol to obtain 2-methil-cyclohexanol, in the presence of a catalyst Ni/SiO₂.     

Polyurethane networks from formiated soy polyols: Synthesis and mechanical characterization

Polyurethanes can be prepared using polyols obtained from vegetable oils in natura, such as castor oil, or from functionalized vegetable oils, such as hydroxylated soybean oil. These polyurethanes have different valuable properties, determined by their chemical composition and cross-linking density. In this study, soy epoxy polyols with different OH contents were prepared through a one-step reaction using the method of in situ performic acid generation. Polyols with OH functionalities from 1.9 to 3.2 were reacted in bulk with different diisocyanates at a NCO/OH molar ratio of 0.8 and 60°C for 24 h. Mechanical properties of the polyurethanes were determined by dynamic mechanical thermal analysis, hardness (Shore A), and swelling measurements. Polymer networks with glass-transition temperatures (T _g ) from −13 to 48°C were obtained. We observed that the higher the OH functionality of the polyols, the higher the T _g and cross-linking density of the polyurethane network. The influence of diisocyanate structure (rigid or flexible chain), curing temperature, and curing reaction time on mechanical properties was also investigated.     

Characterization of Crude and Partially Purified Lipase from Geotrichum candidum Obtained with Different Nitrogen Sources

Lipases from Geotrichum candidum were produced in two different medium: A = 12 % (w/v) clarified corn steep liquor (CCSL) + 0.6 % (w/v) soybean oil (SO) and B = 3.5 % (w/v) yeast hydrolysate (YH) + 0.7 % (w/v) SO. Lipases were partially purified from both media by hydrophobic interaction chromatography using 3.0 mol L^?1 of NaCl as mobile phase, and they were characterized in the crude and partially purified forms. The recovery of lipase activity from CCSL and YH via HIC were 96 and 94.3 %, and the purification factors were 44.3 and 86.7‐fold, respectively. All evaluated lipases had similar optimum pH (7.0–7.7), but, for the CCSL crude lipase, optimum temperature (47 °C) was 10 °C higher than others lipases evaluated. CCSL crude lipase possessed a higher thermo stability than YH crude lipase, e.g., at 37 °C (pH 7.0) the half‐life of CCSL crude lipase was 19.25 h and at pH 8.0 (30 °C) the half‐life was 48 h, which are five and ten times higher than with YH crude lipase, respectively. On the other hand, the YH crude lipase possessed a higher catalytic constant (k_cat = 2.3 min^?1) but with almost the same catalytic efficiency (K_m/k_cat = 32.12 mg mL min^?1) in relation to CCSL crude lipase. The lipases differ in biocatalytic properties between substrates, suggesting that the two lipases can be employed for different applications.     

Sirtuins Modulation: A Promising Strategy for HIV-Associated Neurocognitive Impairments

HIV-Associated neurocognitive disorder (HAND) is one of the major concerns since it persists in 40% of this population. Nowadays, HAND neuropathogenesis is considered to be caused by the infected cells that cross the brain–blood barrier and produce viral proteins that can be secreted and internalized into neurons leading to disruption of cellular processes. The evidence points to viral proteins such as Tat as the causal agent for neuronal alteration and thus HAND. The hallmarks in Tat-induced neurodegeneration are endoplasmic reticulum stress and mitochondrial dysfunction. Sirtuins (SIRTs) are NAD+-dependent deacetylases involved in mitochondria biogenesis, unfolded protein response, and intrinsic apoptosis pathway. Tat interaction with these deacetylases causes inhibition of SIRT1 and SIRT3. Studies revealed that SIRTs activation promotes neuroprotection in neurodegenerative diseases such Alzheimer’s and Parkinson’s disease. Therefore, this review focuses on Tat-induced neurotoxicity mechanisms that involve SIRTs as key regulators and their modulation as a therapeutic strategy for tackling HAND and thereby improving the quality of life of people living with HIV.     

Multilevel surrogate modeling of an amine scrubbing process for CO2capture

Surrogate models provide a powerful method for simplifying calculations within complex simulations. While surrogate models are broadly applied within chemical engineering, little research exists investigating the level of surrogacy's impact on a simplified process model. In this work, artificial neural networks (ANN) and Kriging models are used as surrogate models at the process, process unit, and thermodynamic levels for a CO₂ amine scrubbing process. The surrogated models are evaluated against an Aspen Plus simulation for accuracy, convergence behavior, computational cost, and ability to extrapolate. The thermodynamic and process unit models can better handle discontinuous, non-smooth behavior, and convergence issues in the surrogated truth model, but poor conditioning in the final system of equations results in a lower accuracy and convergence rate than the process level surrogate. Beyond model accuracy, availability of diverse data, intended re-usability, and the desired outputs must be considered when selecting a level of abstraction.     

Effect of Eu-implantation and annealing on the GaN quantum dots excitonic recombination

Undoped self-assembled GaN quantum dots (QD) stacked in superlattices (SL) with AlN spacer layers were submitted to thermal annealing treatments. Changes in the balance between the quantum confinement, strain state of the stacked heterostructures and quantum confined Stark effect lead to the observation of GaN QD excitonic recombination above and below the bulk GaN bandgap. In Eu-implanted SL structures, the GaN QD recombination was found to be dependent on the implantation fluence. For samples implanted with high fluence, a broad emission band at 2.7 eV was tentatively assigned to the emission of large blurred GaN QD present in the damage region of the implanted SL. This emission band is absent in the SL structures implanted with lower fluence and hence lower defect level. In both cases, high energy emission bands at approx. 3.9 eV suggest the presence of smaller dots for which the photoluminescence intensity was seen to be constant with increasing temperatures. Despite the fact that different deexcitation processes occur in undoped and Eu-implanted SL structures, the excitation population mechanisms were seen to be sample-independent. Two main absorption bands with maxima at approx. 4.1 and 4.7 to 4.9 eV are responsible for the population of the optically active centres in the SL samples.     

Mechanistic Investigation of ROS-Induced DNA Damage by Oestrogenic Compounds in Lymphocytes and Sperm Using the Comet Assay

Past research has demonstrated that oestrogenic compounds produce strand breaks in the DNA of sperm and lymphocytes via reactive oxygen species (ROS). In the current investigation, sperm and lymphocytes were treated in vitro with oestrogenic compounds (diethylstilboestrol, progesterone, 17β-oestradiol, noradrenaline and triiodotyronine) and several aspects of DNA damage were investigated. Firstly, mediation of DNA damage by lipid peroxidation was investigated in the presence of BHA (a lipid peroxidation blocker). BHA reduced the DNA damage generated by 17β-oestradiol and diethylstilboestrol in a statistically significant manner. No effects were observed for sperm. Secondly, the presence of oxidized bases employing FPG and EndoIII were detected for lymphocytes and sperm in the negative control and after 24 h recovery in lymphocytes but not immediately after treatment for both cell types. The successful detection of oxidized bases in the negative control (untreated) of sperm provides an opportunity for its application in biomonitoring studies. DNA repair at 24 h after exposure was also studied. A nearly complete recovery to negative control levels was shown in lymphocytes 24 h recovery after oestrogenic exposure and this was statistically significant in all cases. Rapid rejoining of DNA, in a matter of hours, is a characteristic of DNA damaged by ROS.