Template‐Based Reconstruction of Surface Mesh Animation from Point Cloud Animation

In this paper, we present a method for reconstructing a surface mesh animation sequence from point cloud animation data. We mainly focus on the articulated body of a subject — the motion of which can be roughly described by its internal skeletal structure. The point cloud data is assumed to be captured independently without any inter‐frame correspondence information. Using a template model that resembles the given subject, our basic idea for reconstructing the mesh animation is to deform the template model to fit to the point cloud (on a frame‐by‐frame basis) while maintaining inter‐frame coherence. We first estimate the skeletal motion from the point cloud data. After applying the skeletal motion to the template surface, we refine it to fit to the point cloud data. We demonstrate the viability of the method by applying it to reconstruct a fast dancing motion     

A power-factor controller for single-phase PWM rectifiers

A novel power-factor controller for single-phase pulsewidth modulated rectifiers is proposed. The unity power-factor controller for a sinusoidal input current is derived using the feedback linearization concept. Two active switches and two diodes are utilized for AC-to-DC power conversion. Experimental results obtained on a 4 kW prototype are discussed     

Performance of DS/CDMA-based equatorial LEO satellite system usingturbo-codes

Improving the bit error rate (BER) performance at low elevation angles is a crucial determining factor for the capacity of any low earth orbit (LEO) satellite system. In previous work, it has been demonstrated that the BER performance of a DS/CDMA-based equatorial LEO satellite system on a downlink can be improved significantly by using satellite diversity. The authors address the issue of improving BER at low elevation angles by using turbo codes     

FGMOS transistor based low voltage and low power fully programmable Gaussian function generator

In this paper floating gate MOS (FGMOS) transistor based fully programmable Gaussian function generator (GFG) is presented. The circuit combines the exponential characteristics of MOS transistor in weak inversion, tunable property of FGMOS transistor, and its square law characteristic in strong inversion region to implement the GFG. FGMOS based squarer is the core sub circuit of GFG that helps to implement full Gaussian function for positive as well as negative half of the input voltage. FGMOS implementation of the circuit provides low voltage operation, low power consumption, reduces the circuit complexity and increases the tunability of the circuit. The performance of circuit is verified at 0.75 V in TSMC 0.18 μm CMOS, BSIM3 and level 49 technology by using Cadence Spectre simulator. To ensure robustness of the proposed GFG, simulation results for various process corner variations have also been included.     

Pilot-Assisted Carrier Frequency Offset Estimation for OFDM systems with Multiple Preambles Over Fast Fading Channels

This paper proposes a carrier frequency offset (CFO) estimation scheme for OFDM systems over fast fading channels. In the proposed scheme, exploiting the multiple preambles with the identical values, we estimate the CFO over fast fading channels. In particular, we improve the performance of the CFO estimator by applying the overlapped windows to preambles. Through simulations, we validate the proposed estimation scheme by showing the effectiveness of the proposed estimator.     

High current conduction with high mobility by non-radiative charge recombination interfaces in organic semiconductor devices

We report a unique non-radiative p-n-p junction structure to provide high current conduction with high mobility in organic semiconductor devices. The current conduction was improved by increasing p-n junctions made with intrinsic p-type hole transport layer and n-type electron transport layer. The excellent hole mobility of 5.3 × 10^?1 cm²/V s in this p-n-p device configuration is measured by the space charge limited current method with an electric field of 0.3 MV/cm. Enhanced current conduction of 248% at 4.0 V was observed in fluorescent blue organic light-emitting diodes with introduction of non-radiative p-n-p-n-p junction interfaces. Thereupon, the power efficiency at 1000 cd/m² was improved by 22% and the driving voltage also was reduced by 17%, compared to that of no interface device. Such high current conduction with high mobility is attributed to the carrier recombination at p-n-p interfaces through coulombic interaction. This non-radiative p-n-p junction structure suggested in this report can be very useful for many practical organic semiconductor device applications.     

Optical and Electrical Properties of TixSi1‐xOy Films

Ti_xSi_1xO_y (TSO) thin films are fabricated using plasma‐enhanced atomic layer deposition. The Ti content in the TSO films is controlled by adjusting the sub‐cycle ratio of TiO₂ and SiO₂. The refractive indices of SiO₂ and TiO₂ are 1.4 and 2.4, respectively. Hence, tailoring of the refractivity indices from 1.4 to 2.4 is feasible. The controllability of the refractive index and film thickness enables application of an antireflection coating layer to TSO films for use as a thin film solar cell. The TSO coating layer on an Si wafer dramatically reduces reflectivity compared to a bare Si wafer. In the measurement of the current‐voltage characteristics, a nonlinear coefficient of 13.6 is obtained in the TSO films.     

Water-table variation in a sloping aquifer due to random recharge

Variation in the level of the water table is closely linked with recharge. Therefore, any uncertainty associated with the recharge rate is bound to affect the nature of the water-table fluctuation. In this note, a ditch-drainage problem of a sloping aquifer is considered to investigate the effect of uncertainty in the recharge rate on water-table fluctuation. The rate of recharge is taken as an exponentially decaying function with its decay constant as a Gaussian random variable. Expressions for the first two moments of the water-table height, i.e. mean and standard deviation, are presented. By using these expressions, the effect of uncertainty in the recharge rate on the water-table fluctuation has been analyzed with the help of a numerical example.     

Quantification of surface damage of tool steels after EDM

The surface transformation and damage in AISI O1, A2, D2 and D6 tool steels after EDM were investigated. The results show that the recast layer is composed of two distinct layers: a topmost layer solidifying inwards from the specimen surface and an intermediate layer solidifying outwards from the base of the molten metal. The depth of surface cracks is found to correlate well with the thickness of the white layer, the latter being a layer of rapidly solidified material which, depending on the tool steel material, may consist either primarily of the topmost recast layer, or both the topmost and a large part of the intermediate recast layer. The density of surface cracks, however, correlates better with the thickness of the overall recast layer.

Attempts were made to quantify the depth of white (or damaged) layer with respect to the process parameters and surface roughness after EDM. It is found that with a fixed dielectric and flushing condition, the damaged layer correlates well with the pulse energy irrespective of thetool steel material. On the other hand, even though the thickness of the white layer increases with the surface roughness, the result shows considerably more scatter. Based on the present findings, ways of estimating the depth of the damaged layer produced by EDM are proposed.