Rheological and thermal stability of novel weak gels based on sulfonated polyacrylamide/scleroglucan/chromium triacetate

The present study deals with weak gels based on sulfonated polyacrylamide (SPA)/scleroglucan (SC)/Cr³⁺ with an exceptional thermal stability in electrolyte media. The rheological results showed that on increasing the SC concentration the shear viscosity and storage modulus of the SPA/SC/Cr³⁺ system were increased and the dependence of the storage modulus on frequency became weaker. The yield stress of the SPA/SC/Cr³⁺ system was higher than that of the corresponding SPA/SC system. The thermochemical stability increased with increasing relaxation time. The SPA/SC/Cr³⁺ semi‐interpenetrating network exhibited the lowest viscosity loss in electrolyte media; therefore this system may be a potential candidate for enhanced oil recovery applications. © 2016 Society of Chemical Industry     

Improved rheological properties and stability of multiwalled carbon nanotubes/polymer in harsh environment

This work aims to improve the rheological properties and stability of multiwalled carbon nanotubes (MWCNTs)/acrylamide (AA) base skeleton polymer blends at harsh environment of high salinity-high temperature (HS-HT) or various pH. Different co/terpolymers have been accomplished to modify the structure of AA polymer by free-radical copolymerization of AA-based monomers. Anionic, cationic, and hydrophobic functional groups were used for the synthesis of polyelectrolyte, polyampholytic, and partially hydrophobic AA polymer types. The conversion, molecular weight, and poly dispersity of co/terpolymers have been evaluated by nuclear magnetic resonance (¹H-NMR), gel permeation chromatography, and differential scanning calorimetry analysis. The effects of sonication power, concentration of polymer, and concentration of MWCNTs were also investigated on rheological behavior of co/terpolymers. The results show that negative polyelectrolyte and polyampholytic polymers are the best candidates for the improvement of MWCNTs/polymer stability and viscosity at HS-HT and alkali environment, respectively. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47205.     

Application of extended quadrature method of moments for simulation of bubbly flow and mass transfer in gas‐liquid stirred tanks

In the present paper, two gas‐liquid stirred tanks, one agitated by a radial impeller and another by an axial impeller, are modelled using the open‐source computational fluid dynamic (CFD) package OpenFOAM (open source field operation and manipulation). The combined effect of the bubble break‐up and coalescence in the tank is considered by a population balance model (PBM) called extended quadrature method of moments (EQMOM). The three‐dimensional simulation is made using a multiple reference frame (MRF), a well‐established method for the modelling of mixers. Dispersed gas and bubble dynamics in the turbulent flow are modelled using the Eulerian‐Eulerian approach (E‐E) with mixture k‐epsilon turbulent model and the modified Tomiyama drag coefficient for the momentum exchange. The model is developed to predict the spatial distribution of gas phase fraction, Sauter mean bubble diameter (), number density function (NDF), dissolved oxygen (DO) evolution, and flow structure. The numerical results are compared with experimental data and a fair agreement is achieved. The results of the axial impeller are discussed based on four impeller rotational speeds with different volumetric mass transfer coefficients.     

Efficiency above 6% in poly(3‐hexylthiophene):phenyl‐C‐butyric acid methyl ester photovoltaics via simultaneous addition of poly(3‐hexylthiophene) based grafted graphene nanosheets and hydrophobic block copolymers

A combination of reduced graphene oxide (rGO) nanosheets grafted with regioregular poly(3‐hexylthiophene) (P3HT) (rGO‐g‐P3HT) and P3HT‐b‐polystyrene (PS) block copolymers was utilized to modify the morphology of P3HT:[6,6]‐phenyl‐C71‐butyric acid methyl ester (PC71BM) active layers in photovoltaic devices. Efficiencies greater than 6% were acquired after a mild thermal annealing. To this end, the assembling of P3HT homopolymers and P3HT‐b‐PS block copolymers onto rGO‐g‐P3HT nanosheets was investigated, showing that the copolymers were assembled from the P3HT side onto the rGO‐g‐P3HT nanosheets. Assembling of P3HT‐b‐PS block copolymers onto the rGO‐g‐P3HT nanosheets developed the net hole and electron highways for charge transport, thereby in addition to photoluminescence quenching the charge mobility (μ_h and μ_e) values increased considerably. The best charge mobilities were acquired for the P3HT₅₀₀₀₀:PC71BM:rGO‐g‐P3HT₅₀₀₀₀:P3HT₇₀₀₀‐b‐PS₁₀₀₀ system (μ_h = 1.9 × 10^?5 cm² V^–1 s^–1 and μ_e = 0.8 × 10^?4 cm² V^–1 s^–1). Thermal annealing conducted at 120 °C also further increased the hole and electron mobilities to 9.8 × 10^?4 and 2.7 × 10^?3 cm² V^–1 s^–1, respectively. The thermal annealing acted as a driving force for better assembly of the P3HT‐b‐PS copolymers onto the rGO‐g‐P3HT nanosheets. This phenomenon improved the short circuit current density, fill factor, open circuit voltage and power conversion efficiency parameters from 11.13 mA cm^?2, 0.63 V, 62% and 4.35% to 12.98 mA cm^?2, 0.69 V, 68% and 6.09%, respectively. © 2019 Society of Chemical Industry     

The Ablation and Oxidation Behaviors of SiC Coatings on Graphite Prepared by Slurry Sintering and Pack Cementation

SiC coatings were generated on graphite using slurry sintering (SS) and pack cementation (PC). The samples’ ablation features were assessed by an oxyacetylene torch. The rates of mass ablation of the PC–SiC and SS–SiC coatings were approximated 2.17?×?10^?3 and 9.52?×?10^?3 g s^?1, respectively, decreased by 84.1 and 29.6% compared to the uncoated samples. It was mainly attributed to the formation of a SiO₂ layer on the surface. The continuous SiO₂ molten film formed via the PC–SiC oxidation generates a sealing mechanism which can be an obstacle against the oxygen diffusion and hinder more ablation. This is while discontinuous SiO₂ film formed from the thin SS–SiC cannot protect the graphite effectively. The non-isothermal oxidation test shows that without the SiC coating, the sample weight is lost largely from 25 to 1500 °C, and its weight loss was 2.2% after the TGA. However, after coating, the samples possessed excellent oxidation protection and weight losses of SS–SiC and PC–SiC coatings are down to 1.3 and 0.6%, respectively. The more oxidation of the graphite substrate occurred due to the formation of macrocracks in the coating during the TGA and also the formation of holes on SiO₂ glass layer owing to release of CO or CO₂.     

Dye binary mixture formulation by means of derivative ratio spectra of the Kubelka–Munk function

In this study, a new method is introduced for the determination of dye concentration in fabrics dyed with bicomponent dye mixtures. The reflectance spectra of the samples dyed with different binary mixtures of dyes were recorded between 400 and 700 nm. The obtained spectra were divided by a standard spectrum of each of the components in the mixtures and the derivative spectra were calculated. The amounts of dyes were determined by measurements in suitably selected wavelengths in the acquired derivative ratio spectra. The obtained results indicate that the developed derivative ratio spectra method is more accurate than the normal Kubelka–Munk method. The proposed derivative method is simple, accurate, and suitable for quantitative analysis of samples dyed with binary mixed shades. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2010     

Void Formation and Plastic Deformation Mechanism of a Cold-Rolled Dual-Phase Steel During Tension

The void formation and plastic deformation micromechanisms of a cold-rolled DP600 steel during tensile loading were studied by scanning electron microscopy(SEM) and electron backscatter diffraction(EBSD).The SEM observations revealed that the main void nucleation mechanism in the DP600 steel is decohesion at the ferrite-martensite interfaces.The voids were mostly observed between the closely spaced martensite islands situated at the boundaries of relatively finer ferrite grains.The EBSD results indicated a strain gradient developed from the ferrite-martensite and ferrite-ferrite interfaces into the interior of ferrite grains during the tensile deformation,which led to a stress concentration at these interfaces.Moreover,it was demonstrated that local misorientation inside the finer ferrite grains surrounded by martensite islands was higher than that for the coarser ferrite grains,which made the former more prone to void initiation.     

Dissimilar Joining of Pure Copper to Aluminum Alloy via Friction Stir Welding

In this study, the dissimilar friction stir welding(FSW) butt joints between aluminum alloy 5754-H114 and commercially pure copper were investigated. The thickness of welded plates was 4 mm and the aluminum plate was placed on the advancing side. In order to obtain a suitable flow and a better material mixing, a 1-mm offset was considered for the aluminum plate, toward the butt centerline. For investigating the microstructure and mechanical properties of FSWed joints, optical microscopy and mechanical tests(i.e., uniaxial tensile test and microhardness) were used, respectively.Furthermore, the analysis of intermetallic compounds and fracture surface was examined by scanning electron microscopy and X-ray diffraction. The effect of heat generation on the mechanical properties and microstructure of the FSWed joints was investigated. The results showed that there is an optimum amount of heat input. The intermetallic compounds formed in FSWed joints were Al4Cu9 and Al2Cu. The best results were found in joints with 1000 rpm rotational speed and100 mm/min travel speed. The tensile strength was found as 219 MPa, which reached 84% of the aluminum base strength.Moreover, maximum value of the microhardness of the stir zone(SZ) was attained as about 120 HV, which was greatly depended on the grain size, intermetallic compounds and copper pieces in SZ.     

Pressureless sintering of boron carbide

The effect of small Al addition on pressureless-sintering and mechanical properties of B₄C ceramic was analyzed. Different amounts of aluminium powder, from 0% to 5 wt%, were added to the base material and pressureless-sintering was conducted at 2050 and 2150 °C under argon atmosphere. Microstructure, crystalline phases, density evolution, fracture strength, elastic modulus, hardness and fracture toughness were analyzed and correlated to Al additions and firing temperature. Density and grain size of sintered samples increased significantly with Al load while the effect of sintering temperature was less evident; 94% dense material was obtained by adding 4 wt% Al. Bending strength, hardness and fracture toughness of sintered B₄C samples were shown to increase for Al content up to 4 wt% while further additions resulted in a decrease of the mechanical resistance. Conversely, elastic modulus showed an increase with Al load especially between 1 and 3 wt%.     

Asymmetric cellulose acetate dialysis membranes: Synthesis,characterization, and performance

Cellulose acetate (CA) is highly comparable to other synthetic polymer materials and is effective in the hemodialysis process. In this work, asymmetric CA membranes were synthesized with the phase‐inversion method. CA with a molecular weight of 52,000, poly(ethylene glycol) (PEG) with a molecular weight of 400, and 1‐methyl‐2‐pyrrolidone (NMP) were used as the polymer, additive, and solvent, respectively. The effects of the CA and PEG concentrations and coagulation bath temperature (CBT) on the morphology, pure water permeability (PWP), insulin/human serum albumin (HSA) transmission, and finally thermal and chemical stability of the prepared membranes were determined and investigated. In general, increasing the PEG concentration and CBT and reducing the CA concentration resulted in increased PWP and insulin/HSA transmission. Also, these variations facilitated the formation of macrovoids in the membrane sublayer. On the other hand, increasing the PEG and CA concentrations and reducing CBT resulted in increased thermal and chemical stability of the prepared membranes. Also, ratios of 15.5/10/74.5 and 17.5/10/72.5 (w/w) for the CA/PEG/NMP casting solutions and their immersion into coagulation baths with CBTs of 0 and 25°C, respectively, resulted in the preparation of membranes that had not only optimum sieving properties and higher PWP but also thermal and chemical stability better than that of conventional CA hemodialysis membranes. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010