Green Synthesis of Chitosan-Coated Silver Nanoparticle,Characterization, Antimicrobial Activities,and Cytotoxicity Analysis in Cancerous and Normal Cell Lines

Journal of Inorganic and Organometallic Polymers and Materials - The production of silver nanoparticles (AgNPs) using chemical synthesis routes require hazardous and toxic solvents. Nowadays, there...     

CO2 utilization for methanol production; Optimal pathways with minimum GHG reduction cost

Mitigating CO₂ emissions from industries and other sectors of our economy is a critical component of building a sustainable economy. This paper investigates two different methanol synthesis routes based on CO₂ utilization (CO₂ capture and utilization [CCU], and tri-reforming of methane [TRM]), and compares the results with the conventional methanol production using natural gas as the feedstock (NG-MeOH). A comprehensive techno-economic analysis (TEA) model that includes the findings of the life cycle assessment (LCA) models of methanol production using various CO₂ utilization pathways is conducted. Economic analysis is conducted by developing a cost model that is connected to the simulation models for each production route. Compared to the conventional process (with a GHG emission of 0.6 kg CO₂/kg MeOH), the lifecycle GHG reduction of 1.75 and 0.41 kg CO₂/kg MeOH are achievable in the CCU and TRM pathways, respectively. Furthermore, the results indicate that, under current market conditions and hydrogen production costs, methanol production via CO₂ hydrogenation will result in a cost approximately three times higher than that of the conventional process. The integrated TEA–LCA model shows that this increased cost of production equates to a required life cycle GHG reduction credit of $279 to $422 per tonne of CO₂ utilized, depending on construction material and selected pathway. Additionally, when compared to the CO₂ hydrogenation route, the tri-reforming process (TRM-MeOH) can result in a 42% cost savings. Furthermore, a minimum financial support of $56 per tonne utilized CO₂ will be required to make the TRM-MeOH process economically viable.     

Fixed-time fault-tolerant control of uncertain MIMO switched interconnected systems subject to state delay,unknown control directions,and quantized nonlinear inputs

This paper investigates design of an adaptive fixed-time fault-tolerant decentralized controller for a class of uncertain multi-input multi-output (MIMO) switched large-scale non-strict interconnected systems under arbitrary switching subject to unknown control directions, quantized nonlinear inputs, actuator failures unknown external disturbances, and unmodeled dynamics. In addition to interconnected terms, time-varying delayed interconnected terms have been considered in the system model which makes it more general than previous works in the literature. The proposed controller can handle switched systems with unknown switching signal and different types of input nonlinearities including, saturation, backlash, and dead-zone. The singularity problem in designing the fixed time controller has been solved. The quantizer and actuators fault parameters are assumed to be unknown. The Razumikhin lemma has been used to deal with the delayed interconnected terms. To cope with the system unknown dynamics, neural networks (NNs) have been applied and by updating the maximum norms of the networks weight vectors the computational load has been reduced. The explosion of complexity occurring in the traditional back-stepping technique has been avoided by applying dynamic surface control (DSC). Finally, by defining an appropriate common Lyapunov function (CLF), fixed-time convergence of system outputs and the closed-loop system stability have been established. The effectiveness of the proposed controller has been shown via simulation study.     

Recapitulating Antioxidant and Antibacterial Compounds into a Package for Tissue Regeneration: Dual Function Materials with Synergistic Effect

Oxidative damage and infection can prevent or delay tissue repair. Moreover, infection reinforces reactive oxygen species (ROS) formation, which makes the wound's condition even worse. Therefore, the need for antioxidant and antibacterial agents is felt for tissue regeneration. There are emerging up-and-coming biomaterials that recapitulate both properties into a package, offering an effective solution to turn the wound back into a healing state. In this article, the principles of antioxidant and antibacterial activity are summarized. The review starts with biological aspects, getting the readers to familiarize themselves with tissue barriers against infection. This is followed by the chemistry and mechanism of action of antioxidant and antibacterial materials (dual function). Eventually, the outlook and challenges are underlined to provide where the dual-function biomaterials are and where they are going in the future. It is expected that the present article inspires the designing of dual-function biomaterials to more advanced levels by providing the fundamentals and comparative points of view and paving the clinical way for these materials.     

Glyco-Steroidal Amphiphiles (GSAs) for Membrane Protein Structural Study

Integral membrane proteins pose considerable challenges to high resolution structural analysis. Maintaining membrane proteins in their native state during protein isolation is essential for structural study of these bio-macromolecules. Detergents are the most commonly used amphiphilic compounds for stabilizing membrane proteins in solution outside a lipid bilayer. We previously introduced a glyco-diosgenin (GDN) detergent that was shown to be highly effective at stabilizing a wide range of membrane proteins. This steroidal detergent has additionally gained attention due to its compatibility with membrane protein structure study via cryo-EM. However, synthetic inconvenience limits widespread use of GDN in membrane protein study. To improve its synthetic accessibility and to further enhance detergent efficacy for protein stabilization, we designed a new class of glyco-steroid-based detergents using three steroid units: cholestanol, cholesterol and diosgenin. These new detergents were efficiently prepared and showed marked efficacy for protein stabilization in evaluation with a few model membrane proteins including two G protein-coupled receptors. Some new agents were not only superior to a gold standard detergent, DDM (n-dodecyl-β-d -maltoside), but were also more effective than the original GDN at preserving protein integrity long term. These agents represent valuable alternatives to GDN, and are likely to facilitate structural determination of challenging membrane proteins.     

A Microfluidic Contact Lens to Address Contact Lens-Induced Dry Eye

The contact lens (CL) industry has made great strides in improving CL-wearing experiences. However, a large amount of CL wearers continue to experience ocular dryness, known as contact lens-induced dry eye (CLIDE), stemming from the reduction in tear volume, tear film instability, increased tear osmolarity followed by inflammation and resulting in ocular discomfort and visual disturbances. In this article, to address tear film thinning between the CL and the ocular surface, the concept of using a CL with microchannels to deliver the tears from the pre-lens tear film (PrLTF) to the post-lens ocular surface using in vitro eye-blink motion is investigated. This study reports an eye-blink mimicking system with microfluidic poly(2-hydroxyethyl methacrylate) (poly(HEMA)) hydrogel with integrated microchannels to demonstrate eye-blink assisted flow through microchannels. This in vitro experimental study provides a proof-of-concept result that tear transport from PrLTF to post-lens tear film can be enhanced by an artificial eyelid motion in a pressure range of 0.1–5 kPa (similar to human eyelid pressure) through poly(HEMA) microchannels. Simulation is conducted to support the hypothesis. This work demonstrates the feasibility of developing microfluidic CLs with the potential to help prevent or minimize CLIDE and discomfort by the enhanced transport of pre-lens tears to the post-lens ocular surface.     

Improved Water Retention and Positive Behavior of Silica Based Geopolymer Utilizing Granite Powder

Silicon - This research aims to study the behavior of silica based geopolymeric material (22–28%Si) from granitic waste. Granitic waste in powder form was used as main precursor in...     

Semi-analytical SPICE-compatible ballistic I–V model for 5 nm channel MoS2 FETs

Journal of Computational Electronics - An analytical I–V model for a double-gate ballistic monolayer molybdenum disulfide (MoS2) field-effect transistor (FET) with 5 nm channel...     

Challenges and Strategies for Optimizing Corrosion and Biodegradation Stability of Biomedical Micro- and Nanoswimmers: A Review

The last two decades have witnessed the emergence of micro- and nanoswimmers (MNSs). Researchers have invested significant efforts in engineering motile micro- and nanodevices to address current limitations in minimally invasive medicine. MNSs can move through complex fluid media by using chemical fuels or external energy sources such as magnetic fields, ultrasound, or light. Despite significant advancements in their locomotion and functionalities, the gradual deterioration of MNSs in human physiological media is often overlooked. Corrosion and biodegradation caused by chemical reactions with surrounding medium and the activity of biological agents can significantly affect their chemical stability and functional properties during their lifetime performance. It is therefore essential to understand the degradation mechanisms and factors that influence them to design ideal biomedical MNSs that are affordable, highly efficient, and sufficiently resistant to degradation (at least during their service time). This review summarizes recent studies that delve into the physicochemical characteristics and complex environmental factors affecting the corrosion and biodegradation of MNSs, with a focus on metal-based devices. Additionally, different strategies are discussed to enhance and/or optimize their stability. Conversely, controlled degradation of non-toxic MNSs can be highly advantageous for numerous biomedical applications, allowing for less invasive, safer, and more efficient treatments.