Input system for part model in CAD from coloured hand-written illustration with use of ITV

An input system for CAD is developed to construct a part model within a computer from a hand-written sketch. The sketch is drawn based on the technical illustration method. The shape of the input part is constructed by the combination of cuboids and cylinders at present. A coloured illustration is adopted for the ease of the shape recognition and for the input of the technological information.

The illustration is fed into the computer via a black and white ITV. Colours are identified referring to the brightness of the input image. The constitutive bodies, the geometric element with the technological information and the content of the technological information are recognized through image processing such as noise filtering, thinning of the contours, detection of lines and so on. The input system outputs a set of commands to the modelling system. The integrated part model which includes not only the geometrical information but also the technological information of the part is constructed by the connected modelling system CIMS/MODE.

The combination of the input system and the modelling system can support the designer to construct the detailed part model within the computer effectively. It is expected to extend the ability of the input system to identify general hand-written illustrations so that the input method will be more practical and useful.     

A novel transfection method for mammalian cells using calcium alginate microbeads

The direct transfer of genetic materials into mammalian cells is an indispensable technique. We have developed calcium alginate (CA) microbeads which can deliver plasmid DNAs and yeast artificial chromosomes into plant and yeast cells. In this paper, we demonstrate the effective transfection of mammalian cells by CA microbeads immobilizing plasmid DNAs. The transfection was performed using the pEGFP-C1 plasmid containing the cytomegalovirus (CMV) promoter and enhanced green fluorescent protein (EGFP) gene. The transient expression of EGFP was observed 24 h after transfection. The expression efficiency was maximum when the concentration of sodium alginate was 1% and the amount of plasmid DNA was increased to 100 microg. The expression efficiency of our method using CA microbeads is 2-10 times higher than that of the polyethylene glycol (PEG) method. Our results suggest that the CA microbead mediated transfection of mammalian cells effectively delivers genetic materials into mammalian suspension cells.     

Cell cycle analysis of Chinese hamster ovary cells stimulated by phosphatidic acid in serum-free culture

When recombinant Chinese hamster ovary cells were treated with pertussis toxin or genistein, not only lysophosphatidic acid (LPA) but also phosphatidic acid (PA) failed to stimulate progression through the cell cycle in serum-free culture, suggesting that PA and LPA induce cell growth through the same signal transduction pathway. Cell cycle analysis also indicates that cell growth promoted by PA results in enhanced protein production.     

Quasicrystals as cluster aggregates

Quasicrystals are solids that exhibit symmetries long thought forbidden in nature. Since their discovery in a rapidly solidified Al-Mn alloy in 1984, the central issue in the field has been to understand why they form. Are they energetically stable compounds or stabilized by entropy? In recent years, major strides have been made in determining atomic structure, largely by direct imaging using advanced electron microscopy. One system is now known to be energetically stabilized, and quasicrystals are therefore firmly established as a new physical state of matter. They represent a unique packing of atomic clusters some tens of atoms in size, with substantial localized fluctuations, referred to as phasons. Understanding phasons may in future allow their unique macroscopic properties to be tailored for useful materials applications.     

Composite of Au nanoparticles and molecularly imprinted polymer as a sensing material

A molecularly imprinted polymer with immobilized Au nanoparticles (Au-MIP) is reported as a novel type of sensing material. The sensing mechanism is based upon the variable proximity of the Au nanoparticles immobilized in the imprinted polymer, which exhibits selective binding of a given analyte accompanied by swelling that causes a blue-shift in the plasmon absorption band of the immobilized Au nanoparticles. Using adrenaline as the model analyte, it was shown that molecular imprinting effectively enhanced the sensitivity and selectivity, and accordingly, Au-MIP selectively detects the analyte at 5 microM. The combination of molecular imprinting and the Au nanoparticle-based sensing system was shown to be a general strategy for constructing sensing materials in a tailor-made fashion due to wide applicability of the imprinting technique and the independence of the sensing mechanism from the analyte recognition system.     

Dose evaluation in criticality accident conditions using transient critical facilities fueled with a fissile solution

Neutron dose measurement and evaluation techniques in criticality accident conditions using a thermo luminescence dosemeter (TLD) was studied at the Transient Experiment Critical Facility (TRACY) of Japan Atomic Energy Research Institute (JAERI). In the present approach, the absorbed dose is derived from the ambient dose equivalent measured with a TLD, using the appropriate conversion factor given by computation. Using this technique, the neutron dose around the SILENE reactor of the Institute for Radioprotection and Nuclear Safety (IRSN) of France was measured in the Accident Dosimetry Intercomparison Exercise (June 10-21, 2002) organized by OECD/NEA and IRSN. In this exercise, the gamma dose was also measured with a TLD. In this report, measurements and evaluation results at TRACY and SILENE are presented.     

Defect levels in chromium-doped silicon

The transient capacitance technique has been used to study the chromium-related levels in the silicon band gap. Chromium was diffused at temperature of 1100 and 1150°C for 0.5 and 3 hr. Five different levels at E_c?0.11 eV, E_c?0.21 eV, E_c?0.28 eV, E_c?0.36 eV and E_c?0.45 eV were obtained from the Arrheniu plots of the electron thermal-emission rates. The number of levels in the upper half of the band gap decreased from five to two with an increase of Cr-diffusion period. Two levels were located at E_c?0.20 eV (donor) and E_c?0.43 eV (acceptor). A donor level was also observed at E_v + 0.25 eV. The donor level was not affected by the diffusion condition. The majority carrier capture cross sections of the three dominant levels have been measured by the transient capacitance technique modified by the pulse transformer. The values were σ_n = 4.1 × 10^?15 cm² for the upper donor at E_c?0.20 eV, σ_n = 2.0 × 10^?16 cm² for the acceptor at E_c ?0.43 eV and σ_p = 9.1 × 10^?18 cm² for the lower donor at E_v + 0.25 eV, and were independent of temperature. The three dominant levels are due to distinct chromium centers.     

Investigation of the solution condition of lithium electrolyte solutions with LiCF3SO3 salt

Solution condition of the lithium electrolyte of LiCF₃SO₃ salt dissolved in propylene carbonate (PC), dimethoxyethane (DME) and tetrahydrofuran (THF) were investigated based on the measurements of the self-diffusion coefficients of lithium (D_Li) and anion (D_F) species using the pulsed-field gradient (PFG) NMR, viscosity and conductivity. D_Li and D_F decreased with the increase in the solution concentration for these electrolytes. This result reflects the change in the dissociation degree of the salt and the viscosity depending on the solution concentration. In the case of PC solution (the dielectric constant () of PC: 65), measured D_Li and D_F were separated each other with the decrease in the concentration because the dissociation of the salt was promoted to increase the content of dissociated ions. With an increase in the concentration, the dissociation would be restricted and D_Li and D_F approximated each other, which means that the associated ion pairs are dominant in the solution. The effective ionic radius (r_eff) of cation species of PC solution estimated from the Stokes-Einstein relation using the diffusion coefficient and the viscosity results was four times greater than that of the naked lithium ion and independent of the dissociation degree. On the other hand, the r_eff of anion species changed depending on the dissociation degree. This suggests that the dissociated lithium ions are solvated by the PC solvent in the solution. DME and THF solutions did not show the solvation effect from the result of the change in r_eff with the concentration. This suggests that the dissociation degree of the dissolved salt was low due to the low of their solvents ( 7.2) and the ion pairs would dominant in the solutions independent of the solution concentration.     

Study on chemical structures of poly (tetrafluoroethylene-co-perfluoroalkylvinylether) by soft-EB irradiation in solid and molten state

Poly (tetrafluoroethylene-co-perfluoroalkylvinylether) (PFA) was irradiated by soft electron beam (soft-EB) under nitrogen gas atmosphere in solid-state and its molten state, respectively. The changes of thermal property and chemical structures of irradiated PFA in solid-state and molten state were studied by differential scanning calorimetric analysis (DSC) and solid-state ¹⁹F magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. By DSC analysis, the melting temperature shifted to lower temperatures, and crystallinity decreased with increasing soft-EB dose. By solid-state ¹⁹F MAS NMR spectroscopy, the new signals was observed and the detected new signals in irradiated PFA at 315 °C and at 30 °C were due to the tertiary carbon group with branching site (Y-type crosslinking site), perfluoro-propylene site and chain end methylene groups, respectively.Moreover, the molar ratio of perfluoroalkylvinylether (FAVE) structure to -CF₂- units decreased with increasing dose.     

A self-organizing map with twin units capable of describing a nonlinear input-output relation applied to speech code vector mapping

This paper describes a new type of self-organizing map (SOM) with twin units as opposed to the single unit type conventional SOM proposed by Kohonen. The present self-organizing map with twin units (TW-SOM) can describe a nonlinear input-output relation with high accuracy. It is applied to voice conversion problem from bone conduction voice to air conduction voice (nonlinear code vector mapping), and its superiority over the conventional method using Linde-Buzo-Gray (LBG) algorithm is discussed. The tone quality of the converted voice is examined not only from the quantization distortion viewpoint, but also from the auditory sensation viewpoint through actual listening tests. The enhancement of the tone quality was experimentally confirmed.