Effect of organic vapour interaction on permeation rate through polymer films

The permeability coefficients (P) of linalool, citral ethyl butyrate, d-limonene and octanal permeating through LDPE and ionomer films were measured alone as individual and as a component of a mixture at a temperature of 23 °C and in saturated water vapour. Values of P for ionomer film were approximately two orders of magnitude below those for LDPE for the compounds tested. Both PET and PETG films were found to be much better barriers against the compounds tested than LDPE and ionomer films. In general, the permeability, diffusion and solubility coefficients (P. D, and S) values measured in mixture were substantially less than the values obtained individually. Permeability behaviour of these compounds at low concentrations in the mixture was similar to that of permanent gases. Reduction of solubility coefficients in mixture permeation was greater with the higher solubility coefficients. These results provide a better understanding of the mechanism of vapour diffusion through polymers.     

In vitro screening of probiotics and synbiotics according to anti-inflammatory and anti-proliferative effects

There is emerging evidence of the efficiency of probiotic, prebiotic and synbiotic treatments in inflammatory bowel diseases (IBDs) and one of their long-term complications, colorectal cancer (CRC). In this study, various strains of probiotic lactic acid bacteria, prebiotic glucooligosaccharides (GOS) or a synbiotic combination of the two were screened for anti-inflammatory and anti-proliferative effects in different in vitro models in the context of such diseases. To mimic IBD response to Gram negative bacteria, HT-29 cells were sensitised to inflammatory response to lipopolysaccharide (LPS) by IFNγ which increased expression of TLR4, the LPS biosensor, and were then treated by probiotics, prebiotics and synbiotics. Secreted IL-8 and activated NF-κB were monitored as inflammation biomarkers. A selection of active strains were then subjected to a second inflammatory cell culture model consisting of inflammatory activated transgenic Caco-2 cells transfected by a reporter gene under the control of NF-κB inducible promoter. Quantification of reporter gene expression allowed us to demonstrate some probiotic inhibitory properties or to confirm such characteristics in two different models. Proliferation of cancerous HT-29 cells was monitored by XTT assay. Only three probiotic strains induced a proliferation decrease, but with a lack of reproducibility. Binary or ternary probiotic associations, complemented or not by prebiotic GOS, significantly decreased proliferation, especially with a synbiotic association of Bifidobacterium breve, Lactococcus lactis and oligoalternan, a GOS. This combination was selected for the following experiments. We showed the involvement of both bacterial and carbohydrate compounds of this synbiotic in the observed effect by dose range tests. We demonstrated that this decrease in proliferation may be due to an induction of a differentiated phenotype, as shown by the up-regulation of intestinal alkaline phosphatase, a biomarker of differentiation, monitored by real-time RT-PCR in HT-29 cells treated by the selected synbiotics. Thus, this study demonstrates the ability of probiotics to exert anti-inflammatory effects and shows some anti-proliferative characteristics for a specific synbiotics. These products should be further evaluated in animal models to confirm the in vitro results.     

Influence of strontium for calcium substitution on the glass–ceramic network and biomimetic behavior in the ternary system SiO<Subscript>2</Subscript>–CaO–MgO

Strontium (Sr) enhances bone formation both in vitro and in vivo, while it reduces bone resorption. Thus, Sr incorporation in bioactive glass–ceramic scaffolds for bone tissue regeneration could further enhance osteogenesis. The aim of this work was the synthesis, characterization and investigation of the apatite-forming ability in inorganic environment of two sol–gel-derived bioactive Sr-containing glass–ceramic materials with 5 and 10% of SrO. The thermal properties of the synthesized materials were studied using differential thermal analysis (TG–DTA). The apatite-forming ability test was conducted in SBF for various immersion times for both thermally treated and untreated samples. The characterization of the samples before and after immersion in SBF was performed with Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD) and scanning electron microscopy with associated energy-dispersive spectroscopy. FTIR spectra revealed that all synthesized glass–ceramic materials presented the characteristic bands of silicate glasses, while XRD identified various crystalline phases, mostly calcium silicates. Strontium is present in the form of strontium silicate in both as-received and thermally treated specimens, and Sr-diopside in the thermally treated specimens. The apatite-forming ability of the glass–ceramic materials was confirmed by the formation of a hydroxyapatite layer after 3 and 5 days of immersion in SBF on the surface of the untreated and thermally treated samples, respectively. The apatite layer, also, became thicker as the immersion time increased.     

Multiscale Molecular Simulations of Polymer-Matrix Nanocomposites

Following the substantial progress in molecular simulations of polymer-matrix nanocomposites, now is the time to reconsider this topic from a critical point of view. A comprehensive survey is reported herein providing an overview of classical molecular simulations, reviewing their major achievements in modeling polymer matrix nanocomposites, and identifying several open challenges. Molecular simulations at multiple length and time scales, working hand-in-hand with sensitive experiments, have enhanced our understanding of how nanofillers alter the structure, dynamics, thermodynamics, rheology and mechanical properties of the surrounding polymer matrices.     

Differential Expression of the Host Lipid Regulators ANGPTL-3 and ANGPTL-4 in HCV Infection and Treatment

Host lipid metabolism reprogramming is essential for hepatitis C virus (HCV) infection and progression to severe liver disease. Direct-acting antivirals (DAAs) achieve a sustained virological response (SVR) in most patients, but virus eradication does not always protect against hepatocellular carcinoma (HCC). Angiopoietin-like protein-3 (ANGPTL-3) and angiopoietin-like protein-4 (ANGPTL-4) regulate the clearance of plasma lipids by inhibiting cellular lipase activity and possess emerging roles in tumourigenesis. We used ELISA and RT-qPCR to investigate ANGPTL-3 and ANGPTL-4 expression in HCV patients with characterised fibrosis throughout the natural history of hepatitis C and in long-term HCV infection in vitro, before and after DAA treatment. ANGPTL-3 was decreased in patients with advanced fibrosis compared to other disease stages, while ANGPTL-4 was progressively increased from acute infection to cirrhosis and HCC, peaking at the advanced fibrosis stage. Only ANGPTL-3 mRNA was down-regulated during early infection in vitro, although both ANGPTLs were increased later. DAA treatment did not alter ANGPTL-3 levels in advanced fibrosis/cirrhosis and in HCV infection in vitro, in contrast to ANGPTL-4. The association between ANGPTLs and fibrosis in HCV infection was underlined by an inverse correlation between the levels of ANGPTLs and serum transforming growth factor- β (TGF-β). Collectively, we demonstrate the pivotal role of advanced fibrosis in defining the expression fate of ANGPTLs in HCV infection and after treatment and propose a role for ANGPTL-3 as a contributor to post-treatment deregulation of lipid metabolism that could predispose certain individuals to HCC development.     

Biomechanical and structural changes following the decellularization of bovine pericardial tissues for use as a tissue engineering scaffold

To achieve natural scaffolds for tissue engineering applications we decellularized bovine pericardial (BP) tissues according to two different protocols: a novel treatment based on Triton(?) X-100 (12 h, 4 °C) (BP1) and a trypsin/EDTA treatment (37 °C, 48 h) (BP2). Results were compared with commercially available acellular xenogeneic biomaterials, Veritas(?) and Collamed(?). Biomechanical characteristics, high (E(h)) and low (E(l)) modulus of elasticity, of the fresh untreated tissue varied with the anatomical direction (apex to base (T) to transverse (L)) (mean ± SDEV): (41.63 ± 14.65-48.12 ± 10.19 MPa and 0.27 ± 0.05-0.30 ± 0.12 MPa respectively). BP1 had no mechanical effect (44.65 ± 19.73-52.67 ± 7.59 MPa and 0.37 ± 0.14-0.37 ± 0.11 MPa, respectively) but BP2 resulted in significant decrease in E(h) and E(l) (20.96 ± 8.17-36.82 ± 3.23 MPa and 0.20 ± 0.06-0.23 ± 0.06 MPa). Hysteresis ratio (h) varied (19-26 % of the loading energy) independently of anatomical direction. Glycosaminoglycans content was unaffected by BP1, while 22 % of chondroitin/dermatan sulphate and 60 % of hyaluronan were removed after BP2 treatment. Endothelial cell adhesion was achieved after 24 h and 3 days cell culture.     

Dried fruits: phytochemicals and their fate during in vitro digestion

Mediterranean dried fruits that are cultivated and produced in Greece; that is, Corinthian currants, figs, prunes, cherries, apricots and peaches were evaluated in terms of total polar phenols, individual simple phenolics, anthocyanins and antioxidant capacity in vitro. The potential release of dried fruit polar phenols among the different fractions of an in vitro digestion model was also determined. Total polar phenol, flavanol, flavone/flavonol content and antioxidant capacity was in the range 86–551 mg GAE/100g, 0.2–57 mg CE/100g, 9–71 mg RE/100g and 6–47 mg AAE/100g, respectively. A 12–82% release of total phenolics was observed post-mastication, which further increased post-gastric digestion. The same trend was also followed in the case of total flavanols and flavones/flavonols. Total polar phenols and flavones/flavonols were found to enter the simulated epithelial cell wall. Simple polar phenolics and anthocyanins were identified and quantified in all dried fruit extracts and in some of the digestion fractions.     

Multidimensional state-space models: A comparative overview

This paper provides a comparative survey of the existing multidimensional state-space models. The 2-Dimensional state-space models are first presented and compared to each other from both the mathematical and the applications point of view. Then a canonical 3-Dimensional state space realization is considered and its applications are briefly discussed. Finally the special cases of 2-D and 3-D first-order transfer functions are investigated and necessary and sufficient conditions for existence of respective minimal state-space realizations are introduced. The models considered in the paper have been used for treating various design problems of multidimensional systems such as model mathing, transfer function separation, etc., as can be seen in the corresponding references.     

Factorizability conditions for multidimensional polynomials

In this paper, new results concerning the factorizability of multidimensional polynomials are presented. Necessary and sufficient conditions for the factorizability or separation of a givenm-D (m- dimensional) polynomial into: 1)m1-D polynomials, and 2) a number of multidimensional polynomials of appropriate dimensions are explicitly formulated.