The investigation of electrodeposited Cu2O/ITO layers by chronocoulometry process: effect of electrical potential

The thin films of Cu₂O are deposited by electrodeposition technique onto indium tin oxide (ITO)-coated glass substrate at different potentials. The precursor is an aqueous solution which contains respectively 0.05 M of CuSO₄ and citric acid at kept temperature of 60℃ and the applied potential varies within the {-0.4 V,-0.7 V} SCE range. Based on the chronocoulometry (CC) process, the electrochemical, structural and optical parameters are determined. We measured the current as function of potential within the {-0.4 V,-0.7 V} range and the higher current is found to be within the {-0.7 V,-0.3 V} band. The grain sizes are of 12.12 nm and 35.47 nm according to (110) and (221) orientations respectively. The high textural coefficient of 0.943 is recorded for the potential-0.7 V. The transmittance of 72.25 %, within the visible band, is obtained for the as-grown layer at-0.4 V and the band gap is found to be 2.2 eV for the electrodeposition potential of-0.7 V.     

Synthesis and characterization of phosphorus-containing methacrylate-based difunctional crosslinkers and their use in UV-curable resin systems

Two new phosphorus-containing methacrylate-based difunctional crosslinking agents [bis(4-(2-methacryloyloxy)ethyl carboxyl)phenyl phosphine oxide (BEPPPO) and bis(4-(2-methacryloyloxy)ethylcarbonylaminophenyl)phenyl phosphine oxide (BUPPPO)], which can be good candidates for UV-curable coating applications, were synthesized by reacting either a phosphorus-containing diisocyanate [bis(4-isocyanatophenyl)phenyl phosphine oxide] or a phosphorus-containing diacid chloride [bis(4-chloroformylphenyl)phenyl phosphine oxide] with hydroxyethyl methacrylate. The structures of the monomers thus obtained were characterized by FTIR, mass, and ¹H-NMR spectroscopies. The contents of the new crosslinking agents in the UV-cured polymeric films were varied between 10 and 30% by weight. Mechanical, physical, and thermal characterizations of the UV-cured films were investigated. An increase in crosslinking agent content caused an increse in mechanical properties. Films containing BUPPPO had higher tensile strength values compared to the films containing BEPPPO. Thermogravimetric analysis of phosphorus-containing crosslinking agents revealed that incorporating phosphorus into the structure resulted in a high char yield up to 24.5% at 600°C. Water absorption values of UV-cured films were also affected by the amount and type of crosslinking agent. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 2575–2585, 1999     

Detection of the frequency, antimicrobial susceptibility, and genotypic discrimination of Aeromonas strains isolated from municipally treated tap water samples by cultivation and AP-PCR

The frequency, antibiotic susceptibility, and genotypic discrimination of Aeromonas strains isolated from municipally treated drinking tap water distribution systems were investigated in this study. We have analyzed 148 tap water samples collected from 8 different locations by bacterial cultivation and arbitrarily primed polymerase chain reaction (AP-PCR). Gram negative, hemolytic, oxidase (+) and catalase (+) bacterial colonies were applied to the study. Identification of bacterial colonies was done by conventional biochemical method and API ID 20E panel (BioMerieux-France). Molecular epidemiological discrimination of the isolates was done by AP-PCR. Aeromonas spp. was detected in 6 of 148 (4%) tap water samples from 8 different locations. Five isolates were identified as Aeromonas hydrophila and one isolate was identified as Vibrio fluvialis by conventional biochemical method. These data were also confirmed by API 20E panel. One of 6 isolates was resistant to gentamicin, 2 of 6 isolates were resistant to trimethoprim/sulfamethoxazole, 4 of 6 isolates were resistant to ampicillin and ampicillin-sulbactam and all of 6 isolates were resistant to cephalothin. All isolates were found to be susceptible to amikacin, aztreonam, ceftazidime, ceftriaxone, ciprofloxacin. All 6 strains of Aeromonas were discriminated by AP-PCR and were determined that all isolates were from different genotypic sources. Although the frequency of the isolates was under the standard limits, the results indicate that hemolytic A. hydrophila are present in municipally treated tap water samples in Mersin City. While all strains were genotypically distinct, all of them were resistant to first generation beta lactam antibiotics tested in this study.     

Evaluation of reducing power and radical scavenging activities of water and ethanol extracts from sumac (Rhus coriaria L.)

The purpose of this study was to determine the reducing power, metal chelating, and radical scavenging capabilities of water and ethanol extracts of sumac (Rhus coriaria L.), comparatively. The water and ethanol extracts of sumac were evaluated for their radical scavenging activities by means of the DPPH and DMPD assays. Water extract of sumac (R. coriaria L.) scavenged radicals effectively with EC₅₀ values of 36.4 ??g/ml for DPPH free radical and 44.7 ??g/ml for DMPD cation radical. Similarly, the total reducing power of water extract was found higher than ethanol extract in both potassium ferricyanide reduction (FRAP) and cupric ions reduction capacity methods (CUPRAC). 2,2′-Bipyridine was used to determine the metal chelating activity and the result of water extract was found higher than ethanol extract. Total phenolic and total flavonoid contents of both extracts were studied as well. The values of water extract were found to be higher than that of ethanol extract. The present study found that water extracts of sumac (R. coriaria L.) have effective antioxidant and radical scavenging activities as compared to ethanol extracts.     

The Effect of Y<Subscript>2</Subscript>O<Subscript>3</Subscript> Buffer Layer on the Magnetic Properties of Melt-Processed YBCO Superconductor

In this study, two kinds of melt-processed YBCO samples (Y1050-1 and Y1050-2) grown on a buffer layer of Y₂O₃ addition were fabricated. The compacted powders were located on a crucible with Y₂O₃ powder freely poured and a buffer layer of pressed Y₂O₃ to avoid liquid to spread on the furnace plate. The superconducting transition temperature was determined by a standard four-point method at temperatures between 40 and 100 K. The transition temperatures of Y1050-1 and Y1050-2 were found to be 91.6 and 92.9 K at zero magnetic fields, respectively. The magnetization measurements were performed using a vibrating sample magnetometer (VSM) on the same system at 5, 40, and 77 K. The critical current densities for Y1050-1 and Y1050-2 samples were determined to be 6.5×10³ and 5.6×10³ A/cm² at 77 K in zero magnetic fields, respectively. The trapped magnetic field measurements of the samples were performed by using a Hall probe scanning device and a Fe–Nd–B permanent magnet at 77 K. It was found that the trapped magnetic field of the Y1050-1 sample is higher than that of the Y1050-2 sample.     

Finding conclusion stability for selecting the best effort predictor in software effort estimation

Background: Conclusion Instability in software effort estimation (SEE) refers to the inconsistent results produced by a diversity of predictors using different datasets. This is largely due to the “ranking instability” problem, which is highly related to the evaluation criteria and the subset of the data being used. Aim: To determine stable rankings of different predictors. Method: 90 predictors are used with 20 datasets and evaluated using 7 performance measures, whose results are subject to Wilcoxon rank test (95 %). These results are called the “aggregate results”. The aggregate results are challenged by a sanity check, which focuses on a single error measure (MRE) and uses a newly developed evaluation algorithm called CLUSTER. These results are called the “specific results.” Results: Aggregate results show that: (1) It is now possible to draw stable conclusions about the relative performance of SEE predictors; (2) Regression trees or analogy-based methods are the best performers. The aggregate results are also confirmed by the specific results of the sanity check. Conclusion: This study offers means to address the conclusion instability issue in SEE, which is an important finding for empirical software engineering.     

Effects of biodiesel on a DI diesel engine performance, emission and combustion characteristics

Experimental tests were investigated to evaluate the performance, emission and combustion of a diesel engine using neat rapeseed oil and its blends of 5%, 20% and 70%, and standard diesel fuel separately. The results indicate that the use of biodiesel produces lower smoke opacity (up to 60%), and higher brake specific fuel consumption (BSFC) (up to 11%) compared to diesel fuel. The measured CO emissions of B5 and B100 fuels were found to be 9% and 32% lower than that of the diesel fuel, respectively. The BSFC of biodiesel at the maximum torque and rated power conditions were found to be 8.5% and 8% higher than that of the diesel fuel, respectively. From the combustion analysis, it was found that ignition delay was shorter for neat rapeseed oil and its blends tested compared to that of standard diesel. The combustion characteristics of rapeseed oil and its diesel blends closely followed those of standard diesel.     

Effect of the Active Region and Waveguide Design on the Performance of Edge-Emitting Lasers Based on InGaAs/GaAs Quantum Well-Dots

Semiconductors - Edge-emitting lasers with active regions based on novel InGaAs/GaAs quantum heterostructures of transitional dimensionality, i.e., quantum well-dots, which are intermediate in...