Can a daily electricity bill unlock energy efficiency? Evidence from Texas

This study examines the energy efficiency implications of a daily billed energy service, commonly known as ‘prepaid’ electricity, which is used by a growing percentage of residential customers in the competitive Texas electricity market. Our empirical analysis results suggest that this service could save 9.6% of average daily energy consumption, net of the effect of any disconnections. This quantitative study demonstrates that energy efficiency from prepaid energy products can extend to competitive marketplaces.     

Efficacy of multi-mode adhesive systems on dentin wettability and microtensile bond strength of resin composite

Purpose: To evaluate the wetting ability and the microtensile bond strength of adhesive systems in various depths of dentin. Materials and Method: 48 extracted human molars cut in half in buccolingual direction. Buccal and lingual surfaces were used to obtain deep (n = 48) and superficial (n = 48) dentin. Groups were divided into 4 subgroups: Self-etch (CSE), etch&rinse (SB), multi-mode self-etch (SAU) and multimode etch&rinse (EAU) adhesive systems. 3 consecutive contact-angle measurements were obtained: T0- 3 μl drop of distilled water on dentin; T1-Droplet of the adhesive; T2- Distilled water after polymerization of the adhesive. After composite build-ups, microtensile measurements were performed. Contact angle data were analysed with analysis of variance for repeated measures. Bond strength data were analyzed by repeated measures analysis of variance, comparisons were made according to the logarithmic values (p < 0.05). Results: The difference between groups was not significant regardless of dentin depth for all measurements (p < 0.05). All groups except CSE enhanced the wetting ability of the adhesive but reduced the wetting ability of distilled water after application of the adhesive (p < 0.05). Regarding adhesive systems, the groups showed no significant difference between bond strengths to various depths of dentin except SAU (p > 0.05); in SAU, bond strength to deep dentine were significantly higher than superficial dentin (p < 0.05). Regarding adhesives’ bond strength, CSE showed significantly greater values than the other groups (p < 0.05). Conclusion: The cavity depth does not affect the bonding ability for all adhesive systems; self-etch adhesive systems might be a better choice since different adhesives may influence the wetting ability and microtensile bond strength of the dentin substrates.     

Vibrational Energy Transport in Hybrid Ordered/Disordered Nanocomposites: Hybridization and Avoided Crossings of Localized and Delocalized Modes

Vibrational energy transport in disordered media is of fundamental importance to several fields spanning from sustainable energy to biomedicine to thermal management. This work investigates hybrid ordered/disordered nanocomposites that consist of crystalline membranes decorated by regularly patterned disordered regions formed by ion beam irradiation. The presence of the disordered regions results in reduced thermal conductivity, rendering these systems of interest for use as nanostructured thermoelectrics and thermal device components, yet their vibrational properties are not well understood. Here, the mechanism of vibrational transport and the reason underlying the observed reduction is established in detail. The hybrid systems are found to exhibit glass‐crystal duality in vibrational transport. Lattice dynamics reveals substantial hybridization between the localized and delocalized modes, which induces avoided crossings and harmonic broadening in the dispersion. Allen/Feldman theory shows that the hybridization and avoided crossings are the dominant drivers of the reduction. Anharmonic scattering is also enhanced in the patterned nanocomposites, further contributing to the reduction. The systems exhibit features reminiscent of both nanophononic materials and locally resonant nanophononic metamaterials, but operate in a manner distinct to both. These findings indicate that such “patterned disorder” can be a promising strategy to tailor vibrational transport through hybrid nanostructures.     

Relationship between structure and physical strength of silk fibroin nanofiber sheet depending on insolubilization treatment

Materials such as expanded polytetrafluoroethylene and glutaraldehyde‐fixed bovine pericardium are currently used for cardiac tissue regeneration. However, patches made from these materials remain permanently without being absorbed by the body and must be replaced overtime because of degeneration or lack of growth. To improve the long‐term outcomes for cardiac tissue regeneration, biocompatible and biodegradable materials must be used. In this study, we used two biocompatible polymers, silk fibroin (SF), which is biodegradable and segmented polyurethane, to prepare nonwoven sheets that were then insolubilized by water vapor or methanol treatment. The tensile stress increased significantly on adding segmented polyurethane to pure SF and the water vapor processed sheets showed higher extension on strain than the methanol‐processed sheets. The different insolubilization treatments also resulted in different SF structures. Our results show that it is possible to obtain the physical properties required for cardiac tissue repair patch by varying the insolubilization treatment. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45560.     

Processing‐structure‐property relationship in rigid polyurethane foams

Rigid polyurethane (PU) foam is used as a thermal insulating and supporting material in domestic refrigerator/freezers and it is produced by reaction injection molding (RIM) process. There is a need to improve the thermal property of rigid PU foam but this is still a challenging problem. Accordingly, this work investigates the RIM process parameters to evaluate their effects on rigid PU foam's structure and hence property. It has been found that mold temperature is a key parameter whereas curing time has negligible effect on structure of PU foam. Cell size, strut thickness, and foam density have been found very critical in controlling the thermal and mechanical properties. Upper and lower values of 30 to 32 kg/m³ density are critical to observe contribution of radiation and solid conductivity separately. Finally, PU foam with 160 µm average cell size, 16 µm strut thickness, below 10% open cell content, and 30 to 32 kg/m³ density allow obtaining better thermal insulation without significant reducing in the compressive strength. The presented work provides a better understanding of processing‐structure‐property relationship to gain knowledge on producing high‐quality rigid PU foams with improved properties. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44870.     

Research, protection and restoration studies on the historical fabric of Isparta, using Aya Baniya Church as an example

Turkey is a country that bears the tracks of many civilizations because of its geographic location and its characteristics that come from its deeply rooted history. So it contains historical and cultural items of value that are quite rich and can be characterized as intensely universal. Thanks to these valuable items, it has always drawn the attention of the world. Isparta is a city that houses quite a few historical, archaeological and cultural items of value in its structure. Protecting the historical buildings that carry the cultural and historical traces of a period and making a contribution to its reuse for the future of all humanity are a truth of international importance. In this connection, with this study, essential work was carried out and certain suggestions made about St. Baniya Church, which is one of the most important structures of the historically, archaeologically and culturally valuable items that make up the historical fabric of Isparta and especially, the historical and cultural potential of Isparta.     

Investigation of mean glandular dose versus compressed breast thickness relationship for mammography

The relationship between the mean glandular dose (MGD) and the compressed breast thickness (CBT) is commonly used for the presentation of mammographic dose survey results and could also be useful for the assessment of individual breast doses retrospectively in case of lack of necessary dosimetric instrumentation. The high data scattering from the best fit reduces the reliability of this technique. The aim of this study was to investigate the accuracy of this relationship using the data collected from a patient survey and phantom experiment. Patients were divided into three different groups according to their breast glandularities, which were predicted from the inspection of previous mammograms. X-ray beam qualities that will be used in patient examinations were determined according to breast thickness and predicted glandularities. The MGD versus CBT relationship for all the examined patients resulted in a poor correlation (R(2) = 0.28). This relationship was separately obtained for each glandularity group and also for sub-groups of specific beam qualities. The best correlation (R(2) = 0.73) was obtained for the fatty breast group and Mo/Mo combination. A low correlation (R(2) = 0.34) was observed in the mid-glandularity group due to inclusion of a wide range of glandularities in this group. In the case of the dense breast group, although the glandularity range was narrow, there were e still high data scattering (R(2) = 0.25). This was probably due to the use of Mo/Rh and Mo/Mo combinations. This is validated by obtaining the MGD-CBT relationship specific to Mo/Mo combination (R(2) = 0.61).     

Comparison of total‐etch,self‐etch,and selective etching techniques on class V composite restorations prepared by Er:YAG laser and bur: a scanning electron microscopy study

The purpose of this study was to compare total‐etch, self‐etch, and selective etching techniques on the marginal microleakage of Class V composite restorations prepared by Er:YAG laser and bur. Class V cavities prepared on both buccal and lingual surfaces of 30 premolars by Er:YAG laser or bur and divided into six groups. The occlusal margins were in enamel, and the cervical margins were in cementum. Group‐1: bur preparation(bp)+Adper Single Bond 2 (ASB)+Filtek Z550 (FZ); Group‐2: laser preparation(lp)+(ASB)+(FZ); Group‐3: bp + Clearfil S3 Bond Plus (CSBP)+(FZ); Group‐4: lp+(CSBP) (FZ); Group‐5: bp + acid etching+(CSBP)+(FZ); Group‐6: lp + acid etching+(CSBP)+(FZ). All teeth were stored in distilled water at 37°C for 24 hr, and then thermocycled 1000 times (5–55°C). Five teeth from each group were chosen for the microleakage investigation, and two teeth for the scanning electron microscope evaluation. Teeth which were prepared for the microleakage test were immersed in .5% methylene blue dye for 24 hr. After immersion, the teeth were sectioned and observed under a stereomicroscope for dye penetration. Data were analyzed using Kruskal–Wallis and Mann–Whitney U tests (p < .05). More microleakage was observed in the cervical regions compared to the occlusal regions in Groups 3, 5, and 6, respectively (p < .05). There is no statistically significant difference in Groups 1, 2, and 4, in terms of cervical regions versus occlusal regions (p > .05). No significant differences were observed among any groups in terms of occlusal and cervical surfaces, separately (p > .05). Different etching techniques did not influence microleakage of Class V restorations prepared by Er:YAG laser and bur.     

Characterization of the effective atomic number for first row transition elements by the ratio of coherent to compton scattering intensities obtained by wavelength dispersive X-ray fluorescence

The effective atomic numbers of compounds of the first row transition elements were determined experimentally by a scattering method using wavelength dispersive X-ray fluorescence spectrometer. A calibration curve was created by using the intensity ratios of coherent to Compton scattered peaks of pure elements from atomic number 13–48. This relationship was employed to determine the effective atomic numbers of the compounds. The effective atomic numbers were also calculated by using empirical formulas from the literature. Mass attenuation coefficients were calculated using software. The experimentally measured values of the effective atomic numbers with the calculated values by empirical formulas were comparable.     

Macro-azo-initiators having poly(ethylene glycol) units: Synthesis,characterization, and application to AB block copolymerization

Macro-azo-initiators (MAIs) having poly(ethylene glycol) (PEG) units were obtained by various multistep synthetic approaches. In the first stage, macro-azo-initiators of PEG type with azo groups inserted in the main chain were prepared. MAIs were then characterized by chemical analyses, spectral methods, ¹H-NMR, GPC, and DSC techniques. They were used in the free-radical bulk polymerization of dicyclohexylitaconate to synthesize AB block copolymers of poly(ethylene glycol-b-dicyclohexylitaconate) (PEG-b-PDCHI). © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65: 2173–2181, 1997