Ketoprofen Spray-dried Microspheres Based on Eudragit® RS and RL: Study of the Manufacturing Parameters

The preparation of ketoprofen spray-dried microspheres can be affected by the long drug recrystallization time. Polymer type and drug–polymer ratio as well as manufacturing parameters affect the preparation. The purpose of this work was to evaluate the possibility to obtain ketoprofen spray-dried microspheres using the Eudragit® RS and RL; the influence of the spray-drying parameters on morphology, dimension, and physical stability of microspheres was studied. Ketoprofen microspheres based on Eudragit® blend can be prepared by spray-drying and the nebulization parameters do not influence significantly particle properties; nevertheless, they can be affected by drying and storage methods. No effect of the container material is found.     

Inferences about the location of food in capuchin monkeys (Cebus apella) in two sensory modalities.

The authors tested the ability of capuchin monkeys (Cebus apella) to make inferences about hidden food. In Experiment 1, we showed the content of 2 boxes, 1 of which was baited (visual condition, VC) or we shook both boxes producing noise from the baited box (auditory condition, AC). Seven subjects (out of 8) were above chance in the VC, whereas only 1 was above chance in AC. During treatment, by manipulating empty and filled objects subjects experienced the relation between noise and content. When tested again, 7 capuchins were above chance in the VC and 3 in AC. In Experiment 2, we gave visual or auditory information only about the empty box and, consequently, successful choice implied inferential reasoning. All subjects (out of 4) were above chance in the VC, and 2 in the AC. Control tests ruled out the possibility that success resulted from simply avoiding the shaken noiseless box, or from the use of arbitrary auditory information. Similar to apes (Call, 2004), capuchins were capable of inferential reasoning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effects of milk high pressure homogenization on biogenic amine accumulation during ripening of ovine and bovine Italian cheeses

The aim of this work was to evaluate the biogenic amine (BA) content during the ripening of both bovine and ovine cheeses obtained using milk subjected to a homogenization treatment at 100 MPa before cheese-making. The data obtained were compared with those from cheeses produced by the same milks without any treatment or thermized. The results showed that both microbial ecology and BA concentrations of cheeses during ripening were significantly influenced by the type of milk used for cheese-making and by the treatment applied to the raw materials. In particular, the microbial counts found in Caciotta indicated that the high pressure homogenization (HPH) of milk significantly reduced the presence of the yeasts, Micrococcaceae and lactobacilli at the end of ripening. On the other hand, the HPH treatment of milk favoured the proliferation of yeasts in ovine cheese. Moreover, the ovine cheeses were characterized by a remarkably higher accumulation of BA than bovine cheeses. However, the HPH treatment of milk was able to drastically reduce the biogenic amine concentrations in both cheese typologies at the end of ripening.     

On the main flow features and instabilities in an unbaffled vessel agitated with an eccentrically located impeller

The hydrodynamics of an unbaffled vessel stirred by an eccentrically located Rushton turbine is investigated with both Laser Doppler Anemometry and flow visualisation techniques. The flow field is shown to be characterised by a strong circumferential motion which develops itself around two main vortices, one above and one below the impeller, both inclined with respect to the vertical plane. Such vortices are not steady but move periodically very slowly in comparison to the impeller rotational timescale. Accordingly, two low frequency components, whose values are linearly dependent on the impeller rotational speed, are identified across the vessel. The energetic contribution to the turbulent kinetic energy of such flow instabilities is significant so that they should be taken into account when evaluating micro-mixing information from turbulence quantities. Besides, an additional low frequency component is observed and related to vortex shedding phenomena from the flow-shaft interaction which occur in eccentric agitation operation. The flow discharged from the impeller is also measured and discussed.     

Role of surface-inoculated Debaryomyces hansenii and Yarrowia lipolytica strains in dried fermented sausage manufacture. Part 2: Evaluation of their effects on sensory quality and biogenic amine content

The aim was to study the effects of Debaryomyces hansenii and Yarrowia lipolytica strains, used with lactic acid starter cultures (Lactobacillus plantarum), in the manufacture of dried fermented sausages in order to understand their effects on volatile profile, biogenic amine content and sensory properties. The experimental data showed that every yeast strain produced a specific profile of volatile metabolic products. The yeasts also gave sausages with distinctive sensory properties. The degree of mincing also influenced these properties, but none of these factors had significant influence upon the accumulation of biogenic amines.     

Relevant chiroptical and thermal properties in optically active methacrylic copolymers containing carbazole and azoaromatic chromophores in the side-chain

Novel optically active methacrylic copolymers, bearing carbazole and azoaromatic moieties linked to the main chain with a rigid (S)-hydroxysuccinimide residue of one prevailing absolute configuration, have been prepared and characterized with the aim to establish the effects of the chiral group and of the dipolar interactions between the two side-chain chromophores on their properties.In particular, the observed chiroptical properties suggest the presence of ordered chiral conformations at least for chain segments of the macromolecules. Spectroscopic, thermal and chiroptical characterizations of these copolymers demonstrate the occurrence of significant electronic interactions between carbazole chromophores and azobenzene moieties. These interactions are related to the unusual partially alternating structure of the investigated copolymers and the relevant chiroptical and thermal properties. In fact, the polymeric derivates show high glass transition temperatures and good thermal stability, thus opening the way to a variety of potential applications based on photoconductive and optoelectronic properties.     

Fe modeling of the apparent spot technique in circular laser hardening

Circular laser hardening is the laser surface treatment used in the case of cylindrical workpieces. The single-track treatment is a particular case of circular laser hardening used when only one revolution of the workpiece is executed since the treatment of a narrow surface is required. As a result, an annular narrow hardening track is obtained. During the laser hardening, the initial and final parts of the workpiece are overlapped and treated twice. The main drawback of this treatment is the back-tempering effect focused on the overlapping zone. This phenomenon leads to a hardness decrease in the overlapping zone. To avoid this problem, a new technique called apparent spot (AS) was introduced by the authors. The aim of the AS technique is to increase in a fictitious way the dimensions of the laser spot. In the case of circular laser hardening, this technique results into a high-speed rotation (up to 1,000 rpm) of the cylindrical workpiece instead of the traditional low speed. So, a uniform hardening zone without overlapping and back tempering is obtained. However, despite these benefits, there is still a lack of knowledge about the physics of this treatment in particular referring to the thermal cycle that affects the workpiece. In order to enhance the knowledge of this technique in this work, the AS was modeled via the FE approach. DEFORM software was used to model the circular laser hardening process. The software was firstly validated by a comparison with experimental results. Once the software reliability was tested, a regression model was estimated to predict the surface temperature within the treatments. Good agreement was found between the prediction model and the numerical results.     

A Birkhoff interpolation problem and application

A Birkhoff interpolation problem is studied. The explicit solution and estimation of remainder is given. The cases of equidistant and Chebyshev nodes are considered. This problem is of interest in collocation methods of boundary value problem (Costabile and Napoli in Far East J. Appl. Math. 25(3):289–305, 2006; Costabile and Longo in Applied and Industrial Mathematics in Italy III, 2009, in press). In addition an application to quadrature is given.