Identification of thermoresistive solar radiation sensors

An identification procedure to estimate the parameters of a thermoresistive solar radiation sensor is presented. The proposed technique employs only electrical excitation for the sensor. The estimation algorithm is recursive and is applied to the sensor model derived from the thermodynamic equilibrium differential equations. The simulation and the experimental results demonstrate the validity of the proposed approach     

Dysprosium doped Ga:La:S glass for an efficient optical fibreamplifier operating at 1.3 μm

The authors present experimental results which indicate that a Dy ³⁺-doped Ga:La:S glass fibre amplifier may be operated efficiently at 1.3 μm with an optimum device length significantly shorter than a comparable Pr³⁺-doped glass fibre amplifier. Moreover, the efficiency exceeds that obtained from the Pr³⁺-doped ZBLAN devices currently available     

Electrical Conductivity Measurement Through the Loaded Q Factor of a Resonant Cavity

We present a method for measuring the electrical conductivity of metallic materials that relies on the ratio of two loaded Q factors, Q_R/Q_X, with Q_R corresponding to a TE₀₁₁-mode reference cavity made of aluminum, and Q_X the Q that results upon replacing the aluminum plate with the one fabricated from the material to be examined. Electrical conductivity is mathematically inferred from the ratio Q_R/Q_X where the loaded Q factors are measured by using the transmission-type method. Within a 3.0 percent accuracy, conductivities determined at 8.7 GHz for electrolytic copper (5.6 times 10⁷ S/m) and brass (1.6 times 10⁷ S/m) show to be in good agreement with those reported in the literature.     

Faculty and Student Attitudes Toward Community Service: A Comparative Analysis

The Humanitarian Engineering initiative, sponsored by the William and Flora Hewlett Foundation, at the Colorado School of Mines, is creating a program that will support engineering students in understanding their responsibility for solving community development problems that exist throughout the world. As part of this effort, data has been collected on faculty and student attitudes using the ‘Community Service Attitudes Scale,” developed and validated by Shiarella, McCarthy, and Tucker. During the fall 2004, 78 students and 34 faculty members responded to this instrument. Statistically significant differences were found between the attitudes of students and faculty, males and females, and among different age groupings with respect to service activities. A general finding was that faculty displayed better attitudes toward community service than the students.     

Ethylene and Nitric Oxide Involvement in the Regulation of Fe and P Deficiency Responses in Dicotyledonous Plants

Iron (Fe) and phosphorus (P) are two essential elements for plant growth. Both elements are abundant in soils but with poor availability for plants, which favor their acquisition by developing morphological and physiological responses in their roots. Although the regulation of the genes related to these responses is not totally known, ethylene (ET) and nitric oxide (NO) have been involved in the activation of both Fe-related and P-related genes. The common involvement of ET and NO suggests that they must act in conjunction with other specific signals, more closely related to each deficiency. Among the specific signals involved in the regulation of Fe- or P-related genes have been proposed Fe-peptides (or Fe ion itself) and microRNAs, like miR399 (P), moving through the phloem. These Fe- or P-related phloem signals could interact with ET/NO and confer specificity to the responses to each deficiency, avoiding the induction of the specific responses when ET/NO increase due to other nutrient deficiencies or stresses. Besides the specificity conferred by these signals, ET itself could confer specificity to the responses to Fe- or P-deficiency by acting through different signaling pathways in each case. Given the above considerations, there are preliminary results suggesting that ET could regulate different nutrient responses by acting both in conjunction with other signals and through different signaling pathways. Because of the close relationship among these two elements, a better knowledge of the physiological and molecular basis of their interaction is necessary to improve their nutrition and to avoid the problems associated with their misuse. As examples of this interaction, it is known that Fe chlorosis can be induced, under certain circumstances, by a P over- fertilization. On the other hand, Fe oxides can have a role in the immobilization of P in soils. Qualitative and quantitative assessment of the dynamic of known Fe- and P-related genes expression, selected ad hoc and involved in each of these deficiencies, would allow us to get a profound knowledge of the processes that regulate the responses to both deficiencies. The better knowledge of the regulation by ET of the responses to these deficiencies is necessary to properly understand the interactions between Fe and P. This will allow the obtention of more efficient varieties in the absorption of P and Fe, and the use of more rational management techniques for P and Fe fertilization. This will contribute to minimize the environmental impacts caused by the use of P and Fe fertilizers (Fe chelates) in agriculture and to adjust the costs for farmers, due to the high prices and/or scarcity of Fe and P fertilizers. This review aims to summarize the latest advances in the knowledge about Fe and P deficiency responses, analyzing the similarities and differences among them and considering the interactions among their main regulators, including some hormones (ethylene) and signaling substances (NO and GSNO) as well as other P- and Fe-related signals.     

Land Use Effect on the CN Model Parameters in a Tropical Dry Environment

Dry tropical forests account for over 1,000,000 km², and there is still lack of knowledge on their hydrologic processes. The curve number (CN) hydrologic model developed by the Natural Resources Conservation Service (NRCS) is widely applied for runoff determination in various parts of the world, but not so in tropical semiarid regions. This study analyzes the impact of land use changes on the CN model in a tropical semiarid environment, in two catchments of native dry tropical forest and thinned dry tropical forest land use from 2009 to 2012. The CN model was calibrated and validated for the NRCS recommended initial abstraction ratio λ = 0.2, and for λ evaluated from rainfall and runoff data. A reliability analysis was performed using Monte Carlo simulation. Model goodness-of-fit was assessed with statistical criteria. A total of 42 and 40 rainfall-runoff events were analyzed for the native and thinned dry tropical forest, respectively. Characteristic λ values of 0.15 and 0.11 were determined for the two respective catchments. Although CN values were similar for both land uses, CN_λ=0.20 = 80 and CN_{median λ} = 77, the thinned catchment showed a higher CN model parameters variability. The CN model was more sensitive to variations of CN values than to those of λ. This study showed that no matter the vegetation management in a dry tropical forest environment, modeled runoff is not affected by λ, but rather affected by CN, which represents soil, landuse and management.     

Effect of catalysts in the quality of syngas and by-products obtained by co-gasification of coal and wastes. 1. Tars and nitrogen compounds abatement

The aim of this work is to analyse the possibility of using co-gasification technology to process coal mixed with wastes to take profit of its energy content and at the same time to minimize the environmental impact associated with the use of wastes and to diminish the costs of flue gas treatment. The addition to coal of different types of materials, like: pine based waste, petcoke and polyethylene (PE), was not found to give rise to any operational problems, regarding both the feeding system and gasification process and led to higher energy conversions, however, the gas presented higher tars and hydrocarbons content. Several catalysts were tested, such as, dolomite, olivine, nickel and magnesium oxides, zinc oxides and cobalt and molybdenum oxides. Catalyst action was analysed in tars release and also in ammonia compounds reduction. The presence of catalysts allowed increasing hydrogen release, whilst there was a decrease in hydrocarbons and tars contents. A nickel-magnesium oxide was the catalyst that led to the highest reduction in hydrocarbons and tars. This catalyst also led to the lowest NH₃ content in the fuel gas produced, due to the catalyst efficiency in NH₃ destruction.