Defecting From the Gutenberg Legacy: Employing Images to Test Knowledge Gaps

Education‐based knowledge gaps are well‐documented across countries, media platforms, and content. Without exception, knowledge is measured through words not images. Given the centrality of sight in the natural history of Homo sapiens, the extraordinary visual acuity of humans, and the proliferation of screen‐based visual media environments in contemporary life, an experiment was conducted to test the knowledge gap visually. Participants watched 8 audiovisual news stories. Simple recognition of story details and comprehension of that information were tested in verbal and visual modalities. Results offered the first confirmation of the knowledge gap in visual terms. Yet, gaps were significantly smaller employing visual than verbal measures, pointing to the need for continued efforts to develop visual measures for future memory studies.     

Jitter reduction through feedback for picosecond pulsed InGaAsPlasers

Following a comparison of picosecond-pulse generation techniques, feedback schemes are reported for the generation of picosecond pulse trains with improved jitter for both multicontact and conventional single-contact InGaAsP-InP lasers. Subpicosecond jitter is achieved for Q-switched laser sources using a novel optoelectronic feedback scheme. The use of resonant electrical feedback is shown to improve the timing jitter of gain-switched pulses by up to six times. Pulse-to-pulse timing jitter as low as 250 fs is demonstrated for a hybrid of optical and electrical feedback schemes. Limits for timing jitter in diode lasers are established for optoelectronic, electrical, and optical feedback schemes, and the key picosecond pulse generation schemes are compared in terms of timing jitter for the first time     

A Software Development System for Reliable Applications

This paper describes a Software Development System (SDS) that was implemented at Bell Laboratories to support the development of software for Electronic Switching Systems (ESS). The SDS supports multiple programmers and multiple releases. It permits incremental development in a timely and efficient manner while maintaining project management control and tracking capabilities. Software testing and debugging tools are also provided. The SDS was implemented and is currently being used to support the development and maintenance of software used in the No. 2B and No. 3 ESS manufactured by Western Electric for the Bell System. There are approximately 500 of these systems currently serving telephone subscribers. This paper describes the SDS implementation for the No. 2B ESS, and discusses some of the user and project experiences.     

Electronically scanned cmt detector array for the 8?14 ?m band

A cadmium-mercury-telluride photovoltaic hybrid array of 1024 elements is described. The device operates in the 8?14 ?m band and is electronically scanned by means of MOS silicon switches. An example of a `staring? image obtained with the device is shown.     

Accumulation of eicosapentaenoic acid in plasma phospholipids of subjects fed canola oil

The metabolism of α-linolenic acid from canola oil was studied in eight normolipidemic men. The 42-day study was divided into three periods: a 6-day pre-experimental and two 18-day experimental. Approximately 75% of the dietary fat (28% of total energy) was provided by a mixture of fats during the pre-experimental period and either canola oil (CO) or sunflower oil (SO) during the experimental periods. The CO and SO diets were fed in a cross-over design. The ratios of linoleic to linolenic acid were 2.6∶1 and 73.9∶1 in the CO and SO diets, respectively. Dietary fat source had an effect on plasma phospholipid fatty acids: 18∶1n−9, 18∶3n−3 and 20∶5n−3 were higher (p<0.05), and 18∶2n−6 was lower in the phosphatidylcholine fraction; 18∶1n−9 was higher and 20∶4n−6 lower in the phosphatidyl-ethanolamine fraction; and 18∶1n−9 and 20∶5n−3 were higher and 20∶4n−6 and 22∶6n−3 were lower in the alkenylacyl-ethanolamine phospholipid fraction on the CO diet as compared to the SO diet. Consumption of the canola oil diet resulted in higher n−3 fatty acid levels and lower n−6 fatty acid levels in plasma phospholipids than consumption of the sunflower oil diet.     

Cholesterol oxidation in heated lard enriched with two levels of cholesterol

Cholesterol oxidation in lard containing two levels of added cholesterol was monitored using capillary gaschromatography. Loss of cholesterol and formation of cholesterol oxidation products (COPs) were measured. Lard samples with 10 times (Test I) and 2 times (Test II) the amount of cholesterol originally found in each batch of lard were heated at 180°C for 10 hr a day for 240 and 160 hr, respectively. Cholesterol steadily decreased throughout the heating period in both tests. Cholesterol loss followed a first-order reaction rate, with a rate constant (k) of −1.18×10⁻³ h⁻¹ for Test I and −9.45×10⁻³ h⁻¹ for Test II. The COPs accumulated during both heating tests. But the amount of COPs formed did not total the amount of cholesterol lost. During heating, thermal degradation of cholesterol likely occurred, and those products were not detected. During cooling, hydroperoxides formed, which further oxidized into the COPs that were detected. The 7-ketocholesterol and 5α,6α-epoxycholesterol were the predominant COPs formed. The isomeric 7α-and 7β-hydroxycholesterols also accumulated in the heating tests. The 3β,5α,6β-cholestantriol was found in very small amounts and the 25-hydroxycholesterol was not detected. Presented in part at the 80th AOCS Annual Meeting, Cincinnati, OH, in May, 1989.     

Rust-red grain beetle,Cryptolestes ferrugineus,and flat grain beetle,Cryptolestes pusillus: Antennal and behavioral responses to synthetic components of their aggregation pheromones

Antennal and behavioral responses of the rust-red grain beetle,Cryptolestes ferrugineus, and the flat grain beetle,C. pusillus, to synthetic samples of the macrocyclic lactones reported to comprise their aggregation pheromones were investigated. Electroantennogram (EAG) recordings were obtained successfully from both species for the first time. Females of both species showed larger EAGs than males. The EAGs ofC. ferrugineus showed a high degree of specificity for conspecific aggregation pheromone components;C. pusillus showed much less specificity. Behavioral tests were conducted using two-choice pitfall bioassays. Separation of the results into the two effects of activity stimulation and direction finding showed that both effects contributed to the overall response, although sometimes to different extents. The strain ofC. pusillus studied responded equally well to both components of its pheromone, whereas it had been reported previously that only one was active, the other acting as a Synergist and eliciting no response when tested alone. With both species, behavioral response was elicited with a single lactone, suggesting that it might not be necessary to use both components for field use. Particularly surprising was thatC. pusillus showed a greater response to the pheromone components ofC. ferrugineus than to its own. Aeration of the two species and thermal desorption of the collected volatiles confirmed production of the expected lactones, and aeration of authentic lactones showed that the response was not due to the C.ferrugineus pheromone components being markedly more volatile. This response, which seems to be an actual preference, is the first to be discovered among the cucujid beetles and encourages optimism that a practical lure for various species may not need to be as complex as originally feared.     

Crystallization phenomena in the injection molding of poly ether ether ketone and its influence on mechanical properties

A basic experimental investigation of structure development in the injection molding of poly ether ether ketone (PEEK) is presented. It is shown that, dependent upon processing conditions, especially mold temperature, PEEK may be injection molded to form glassy or crystalline parts or parts consisting of intermediate structures such as a glassy surface and one with an internal crystalline link. In general, cold molds produce glassy parts and hot molds crystalline parts. This behavior is carefully characterized using optical microscopy, differential scanning calorimetry, and wide angle X-ray diffraction techniques. The mechanical properties of these injection molded parts is characterized as a function of the crystalline and glassy contents and types of structural gradients developed in the parts.     

Revisiting the Worksite in Worksite Health Campaigns: Evidence From a Multisite Organ Donation Campaign

This article advances the beginnings of a general theory of organizational features to aid in understanding why health campaigns that work well in one organization may be ineffectual in another organization. The physical, social, and information structures of organizations are theorized to create an interaction environment that is distinct to each organization and that influences health campaigns. To test this argument, an organ donation campaign was conducted in 46 organizations. Multilevel modeling yielded mixed findings. Physical structure was negatively associated with signing an organ donor card. Social structure and information structure were positively associated with communication with coworkers about donation and communicative peer influence. Industry type was positively associated with knowledge change.     

CO/sub 2/ laser processing of alumina (Al/sub 2/O/sub 3/) printed circuit board substrates

We report the results of an investigation of the laser-material interaction processes involved in laser drilling of alumina, through the use of an enhanced peak power (2.5 kW) CO/sub 2/ laser and novel temporal pulse formats. Peak power was varied from 30 W to 2 kW for pulses of constant energy to observe the effect produced on scribe depth. High-speed videography of hole formation has been combined with microscopic analysis to investigate the key processes involved in laser processing of alumina. Plasma screening was observed for short, high peak power laser pulses, and optimal scribing was achieved in the weakly plasma absorbing regime. A new processing technique for scribing alumina has been developed, which exploits the fast response of the laser to produce novel temporal pulse shapes, which can be modified to generate cleaner holes. Scribe speeds of up to 280 mm/spl middot/s/sup -1/ were obtained for scribe holes >200 /spl mu/m deep and 150 /spl mu/m apart, with no material plugging the hole, in 0.635-mm-thick 96% alumina.