Anthocyanin composition in aged Chilean Cabernet Sauvignon red wines

Anthocyanins in aged Cabernet Sauvignon red wines were studied by HPLC–MS. The major anthocyanin in 6, 7, and 8 year old red wine extracts was the dimer vitisin A produced by condensation of malvidin-3-O-glucoside mediated by pyruvic acid. In aged wine, the content of malvidin-3-O-glucoside decreased with age with a concomitant increase of vitisin A. The latter is accompanied by several condensation products with molecular weight up to 1500 m/z. Differential pulse voltammetry indicated that aged wines have lower antioxidant capacity than young wine (400 mV), but higher than malvidin-3-O-glucoside (483 mV). Tafel’s plots showed that the electrochemical process occurring in aged wines is different from young wines. Six, seven and eight year old wines show similar behaviour with plots of 234, 177 and 188 mV/dec, respectively. These values are higher than the expected 120 mV/dec corresponding to a first electronic transfer but smaller compared to the 523 mV/dec corresponding to young wine.     

Phospholipid Cyclosporine Prodrugs Targeted at Inflammatory Bowel Disease (IBD) Treatment: Design,Synthesis, and in Vitro Validation

Novel phospholipid (PL)-cyclosporine conjugates were prepared and studied as potential prodrugs for inflammatory bowel disease (IBD). Our approach relies on phospholipase A₂ (PLA₂), which is overexpressed in the inflamed intestinal tissues, as the prodrug activator to potentially release cyclosporine at the site of inflammation. PL-cyclosporine prodrug conjugates with methylene linkers of various lengths between the sn-2 position of the PL and cyclosporine were synthesized and evaluated for in vitro activation. Surprisingly, despite previous work indicating that conjugates with six methylene linkers between the lipid and drug would suffer rapid enzymatic hydrolysis, with cyclosporine this was not observed. However, compounds with longer linkers (n=10, 12 methylene units) display complete release of the drug by PLA₂-catalyzed hydrolysis, thus demonstrating the importance and profound impact of structural fine-tuning. This study represents a proof-of-concept for our hypothesis and a first step towards a truly targeted IBD treatment with cyclosporine that could be administered throughout the GI tract.     

The Fifth WS/DGAT Enzyme of the Bacterium Marinobacter aquaeolei VT8

Wax esters (WE) belong to the class of neutral lipids. They are formed by an esterification of a fatty alcohol and an activated fatty acid. Dependent on the chain length and desaturation degree of the fatty acid and the fatty alcohol moiety, WE can have diverse physicochemical properties. WE derived from monounsaturated long-chain acyl moieties are of industrial interest due to their very good lubrication properties. Whereas WE were obtained in the past from spermaceti organs of the sperm whale, industrial WE are nowadays mostly produced chemically from fossil fuels. In order to produce WE more sustainably, attempts to produce industrial WE in transgenic plants are steadily increasing. To achieve this, different combinations of WE producing enzymes are expressed in developing Arabidopsis thaliana or Camelina sativa seeds. Here we report the identification and characterization of a fifth wax synthase from the organism Marinobacter aquaeolei VT8, MaWSD5. It belongs to the class of bifunctional wax synthase/acyl-CoA:diacylglycerol O-acyltransferases (WSD). The protein was purified to homogeneity. In vivo and in vitro substrate analyses revealed that MaWSD5 is able to synthesize WE but no triacylglycerols. The protein produces WE from saturated and monounsaturated mid- and long-chain substrates. Arabidopsis thaliana seeds expressing a fatty acid reductase from Marinobacter aquaeolei VT8 and MaWSD5 produce WE. Main WE synthesized are 20:1/18:1 and 20:1/20:1. This makes MaWSD5 a suitable candidate for industrial WE production in planta.     

Characterization of the Arcobacter contamination on Belgian pork carcasses and raw retail pork

In the present study, the occurrence of Arcobacter was assessed at four sites on 169 porcine carcasses (foreleg, chest, pelvis and ham) at different stages of slaughter and 47 pork products at retail. Carcass swab samples were enriched in Arcobacter broth containing 5-fluorouracil, amphotericine B, cefoperazone, novobiocine and trimethoprim as selective supplement. After microaerobic incubation, arcobacters were isolated using Arcobacter selective agar plates, containing the selective supplement described above. Some carcass samples and all pork samples were also examined quantitatively. All 862 isolates were identified by a species-specific m-PCR-assay and 182 isolates were further characterized by ERIC-PCR. Arcobacters were isolated from one or more sampling places on 96.4% of the carcasses, with the foreleg and the chest area as the two most contaminated sites. Furthermore, A. cryaerophilus was the most common species. Chilling decreased the number of positive carcasses, but did not eliminate all arcobacters. Direct isolation revealed that only a few carcasses were contaminated with arcobacters on foreleg and/or chest at levels higher than 10(2 )cfu/100 cm(2). Characterization demonstrated a large heterogeneity among the isolates, with ten genotypes present on more then one site per carcass. Fourteen genotypes were simultaneously present on carcasses from different herds slaughtered on the same day, which may indicate cross-contamination. Arcobacters were present in 21% of the pork samples taken at retail, but contamination levels did not exceed 100 cfu per gram. Characterization of the A. butzleri and A. cryaerophilus isolates indicated an additional contamination during processing at retail.     

Dietary intakes of some essential and non-essential trace elements, nitrate, nitrite and N-nitrosamines, by Dutch adults: estimated via a 24-hour duplicate portion study

Duplicate portions of 24-hour diets of 110 adults have been analyzed for aluminium, cadmium, copper, lead, manganese, mercury, zinc, nitrate, nitrite and volatile N-nitrosamines. The mean daily intake of copper (1.2 mg) is only about 50% of recommended values; mean daily intakes for manganese (3.3 mg) and zinc (8.4 mg) are adequate and marginal respectively with respect to recommended amounts. For the non-essential elements Al, Cd, Hg and Pb, mean daily intakes of 3.1 mg, 0.01 mg, 0.002 mg and 0.034 mg were found, respectively. For Cd this amounts to 17% of the acceptable daily amount, for Al, Hg and Pb 5%, 5% and 8%, respectively. Since 1976-1978 the dietary intake of lead has been reduced by a factor three; for the other six elements daily dietary intakes are almost the same as in 1976-1978. Average nitrate intake was 52 mg NO3-/day, about 25% of the ADI. Only 16 diets contained a measurable amount of nitrite. The highest daily intake (0.7 mg NO2-) is less than 10% of the ADI. Volatile N-nitrosamines were detectable in two duplicate diets (NDMA and NPIP). It is estimated that the daily dietary intake of volatile N-nitrosamines is around 0.1 microgram or less.     

Local Notions of Healthy Eating and National Dietary Guidelines: A Comparison in Vulnerable Salvadoran Communities

This study presents an assessment of local definitions and perceptions concerning healthy eating through a study in four resource-poor border communities in El Salvador. The study included focus groups, key-informant interviews, and observations of the food environment. Local definitions of healthy eating elicited through focus groups were compared to the national Salvadoran dietary guidelines recommendations. The comparison revealed several areas of overlap (including the importance of dietary variety, fruits, and vegetables, among others) and omissions (mention of limiting sweets/candy, salt, sugar, and alcohol). Focus group participants expressed concerns over the origin of their foods and whether food contained harmful chemicals. These conversations also revealed the contradictions between nutrition knowledge and preferences for foods classified as unhealthy. This article concludes with a discussion about barriers to healthy eating identified in the focus groups and through the food environment assessment.     

Differentiated Patterns of Legume Sensitisation in Peanut-Allergic Patients

Patients with peanut allergy are often serologically sensitised to other legumes. If primary peanut allergy was contracted, secondary allergies to other legume plants may develop. The cross-sensitisation implies an enhanced risk of food-related anaphylaxis for the patients even if its clinical relevance is under discussion. In the present study, 32 patients with anti-peanut immunoglobulin E-levels (IgE) of at least class 1 according to the ImmunoCap™ classification system were included. The patients had been referred to the Norwegian National Register and Reporting System for Severe Allergic Reactions to Food with histories of anaphylaxis by the consumption of legume-containing foods. The patient sera were analysed for IgE that reacted to peanut (Arachis hypogea), soybean (Glycine max), pea (Pisum sativum), lupin (Lupinus albus) and fenugreek (Trigonella foenum graecum). Immunoblot experiments were performed using extracts of in total eight different legume plants. IgE measurements and blot analyses revealed differentiated patterns of legume sensitisation. One third of the patients had anti-peanut IgE class 4 to 6. In contrast, just one patient had specific IgE higher than class 4 to respectively pea, soybean and fenugreek. However, ten patients had elevated anti-fenugreek IgE (≥class 3), significantly more than for the other legumes. The second highest levels were found for soybean, followed by pea and lupin. The immunoblots showed particularly strong IgE binding to proteins at 12, 22, 30, 36 and 50 kDa for all legumes, indicating that the major peanut allergens Ara h 1, Ara h 2 and Ara h 3 are strong candidates for causing cross-sensitivity.     

Nutritional properties of medium-chain triglycerides

The biological effects of MCT (medium-chain triglycerides) differed from those of conventional fats, and certain of these suggested examination of the fatty acid composition and triglyceride structure of the adipose tissues and other organs of rats which were fed medium- or long-chain triglyceride mixtures with two levels of linoleic acid. Fatty acid compositions and TG patterns varied with the tissue, with the dietary fat, and with the level of linoleate in the diet. Increasing the latter resulted in the deposition of more linoleate at the expense of oleate and in the deposition of more of the dietary fatty acids. The percentage of completely saturated triglyc-erides (S₃), in adipose tissue with the higher linoleate supplement in the rats fed MCT, decreased in those fed LCT and was unchanged in the controls fed a fat-free diet. The increased deposition of the dietary fatty acids was more pronounced in the S₃ band. Supported by Grants U-1347 and U-1510 from the Health Research Council of the City of New York.     

A Wear Detection Parameter for the Wheel–Rail Contact Based on Emitted Noise

This article describes how a wheel–rail wear detection parameter based on noise was developed by running a rapid transit train instrumented with microphones in a depot with a small curve radius. This full-scale test made use of previous knowledge gained from lab-scale tests. The lab- and full-scale tests showed that noise could be used as an indicator of wear transition, when normal wear turns into severe or catastrophic wear. This transition was accompanied by a significant increase in sound pressure and a broader sound pressure amplitude spectrum; that is, a narrow initial amplitude distribution in the normal wear regime and a broader distribution in the severe wear regime. The measured noise from the inner/low and outer/high rails was analyzed in conjunction with the wear from the outer wheel and comparisons were made between cleaned (exposed to severe wear) and lubricated (no wear) rail. Based on those analyses, a wear detection parameter criterion was developed for this specific train. This wear parameter has been implemented in a real-time condition monitoring system so that warnings of the risk for severe wear could be sent to the maintenance department. Validation of the wear parameter and challenges linked to open system conditions are discussed in this article.