Low temperature thermal degradation of cellulosic insulating paper in air and transformer oil

The thermal degradation of cellulose in the form of Kraft insulating paper has been studied in air for up to 140 h and in transformer oil for up to 3500 h in the temperature range 60–120 °C using measurements of the degree of polymerization (DP) and (in oil) analysis of furanic degradation products. Degradation was faster in air than in oil. The DP decreased from the original value of 1.2 × 10³ to a limiting value in the range of 300–900 depending on temperature and degradation conditions. The variation of the DP with degradation time was consistent with two mechanisms, one in which the first‐order rate constant decreased exponentially with time, and another in which only a limited number of chain bonds were scissionable. The degradation rate was first order in scissionable bonds. The major furanic degradation products were 2‐furaldehyde, 5‐hydroxymethyl‐2‐furaldehyde and furfuryl alcohol. Their concentrations continually increased over the timescale of the experiments. © 2001 Society of Chemical Industry     

Nonlinear control of the doubly-fed induction generator in wind power systems

This paper describes the models of a wind power system, such as the turbine, generator, power electronics converters and controllers, with the aim to control the generation of wind power in order to maximize the generated power with the lowest possible impact in the grid voltage and frequency during normal operation and under the occurrence of faults. The presented work considers a wind power system equipped with the doubly-fed induction generator and a vector-controlled converter connected between the rotor and the grid. The paper presents comparative results between proportional-integral controllers and neural networks based controllers, showing that better dynamic characteristics can be obtained using neural networks based controllers.     

Optical properties of the synthetic nanocomposites SiO2/CdS/poly(styrene-co-maleic anhydride) and SiO2/CdS/poly(styrene-co-maleimide)

Hybrid materials consisting of SiO2/CdS particles dispersed in poly(styrene-co-maleic anhydride) and poly(styrene-co-maleimide) have been synthesized and characterized. The polymer nanocomposites were synthesised in situ in the presence of previously prepared inorganic fillers (SiO2/CdS). The nanocomposites were synthesized with the use of as-prepared or surface-modified SiO2/CdS fillers. For both types of nanocomposites, the optical properties were evaluated and the observation of size quantization effects in the optical spectra is discussed. In this context, the influence of the inorganic fillers and polymer matrices on the optical properties of the final nanocomposites was investigated.     

Optical behaviour of Er doped rutile by ion implantation

Rutile single crystals were implanted at room temperature with fluences of 5 × 10¹⁵ Er⁺/cm² ions with 150 keV energy. Rutherford backscattering/channeling along the 0 0 1 axis reveals complete amorphization of the implanted region. Photoluminescence reveals the presence of an optical centre close to the intra-ionic emission of Er³⁺ in the as-implanted samples. After annealing at 800 °C in air no changes were observed in the aligned RBS spectrum. On the contrary, annealing in reducing atmosphere (vacuum) induces the epitaxy of the damage layer. These results are unexpected, since for implantations of other ions under the same conditions, epitaxial recrystallization of the damage region occurs at this temperature. On the other hand, photoluminescence studies show the presence of new Er-related optical centres with high thermal stability in the samples annealed under oxidizing conditions. Annealing at 1000 °C in vacuum leads to the complete recrystallization of the damaged region. At this temperature a large fraction of Er segregates to the surface.     

In vitro and in vivo inhibition of Daphnia magna acetylcholinesterase by surfactant agents: possible implications for contamination biomonitoring

This study was designed to investigate the effect of two surfactants, dodecyl benzyl sulfonate (DBS), sodium dodecyl sulfate (SDS), and of a domestic detergent (Y) on the AChE activity of the crustacean cladoceran Daphnia magna. All the chemicals significantly inhibit the activity of the enzyme, both in vitro and in vivo conditions. In vitro lowest observed effect concentration (LOEC) values ranged from 12.5 to 100 mg/l and correspondent IC50 (50% inhibition concentration) values ranged from 6.6 to 58.5 mg/l. In vivo LOEC values ranged from 2 to 11.9 mg/l, while EC50 (50% effect concentration) values ranged from 11.4 to 56.7 mg/l. AChE inhibition by environmental contaminants such as surfactants, detergents and metals may lead to false diagnostics and even wrong conclusions in biomonitoring studies based on the use of AChE as a specific biomarker for organophosphorous and carbamate compounds.     

Hysterosalpingo contrast sonography (HyCoSy) with SH U 454 (Echovist) for the assessment of tubal patency

A total of 88 Fallopian tubes from 44 patients was examined with hysterosalpingo contrast sonography (HyCoSy), hysterosalpingogram (HSG), and laparoscopic chromopertubation (LC) in order to assess their relative accuracy for measuring tubal patency. HyCoSy was done by transvaginal ultrasound and the contrast was SH U 454 (Echovist). The flow of multiple fractions of the contrast medium through each Fallopian tube was observed in real time in appropriate imaging planes by means of a transvaginal probe. Compared with laparoscopic results, we found a sensitivity of 85.2%, a specificity of 85.2%, a positive predictive value (PPV) of 71.9%, a negative predictive value (NPV) of 92.9% and concordance (HyCoSy/LC) of 85.2%, while the corresponding values for HSG were sensitivity = 85.2%, specificity = 83.6%, PPV = 69.7%, NPV = 92.7% and concordance (HSG/LC) of 84.1%. Compared with HSG results, HyCoSy obtained a co-positivity of 66.7%, a co-negativity of 81.8% and a concordance of 76.1%. In conclusion, HyCoSy with SH U 454 proved to be a reliable and safe modality for evaluating tubal patency; it is suitable as an outpatient diagnostic procedure to be used before more invasive procedures.     

Identification and Cloning of a Pheromone-Binding Protein from the Oriental Beetle, Exomala orientalis

We have identified and cloned a pheromone-binding protein (EoriPBP) from the Japanese and American populations of the Oriental beetle, Exomala orientalis (Coleoptera: Scarabaeidae). The protein showed more than 90% amino acid identity to the previously identified pheromone-binding proteins from Popillia japonica (PjapPBP) and Anomala osakana (AosaPBP), as well as to one of the odorant-binding proteins from Phyllopertha diversa (PdivOBP1). EoriPBP has 116 amino acids, with a calculated molecular mass of 12,981 Da, pI of 4.3, and six highly conserved cysteine residues. 5-RACE amplifications led to the characterization of a signal peptide with 19 amino acids. The signal peptide showed high amino acid identity to the signal peptide for AosaPBP. Comparison of the amino acid sequences of the PBPs involved in the detection of similar ligands, i.e., monounsaturated lactones and ketone, suggests that the most variable residues among the PBPs from E. orientalis, P. japonica, and A. osakana are probably the most discriminating residues. As with the pheromone-binding protein from Bombyx mori, the residues at positions 61, 64, 71, and 82 in EoriPBP, PajpPBP, and AosaPBP, which are either valine, leucine, isoleucine, or methionine, are likely to be specificity determinants.     

Elastic time computation in QoS-driven hypermedia presentations

The development of hypermedia/multimedia systems requires the implementation of an element, usually known as formatter, which is in charge of receiving the specification of a document and controlling its presentation. Adjustments over the duration of media objects is one of the most important adaptation techniques that hypermedia formatters should implement in order to maintain document spatio-temporal relationships. Elastic time computation accomplishes this goal by stretching or shrinking the ideal duration of media objects. This paper presents new elastic time algorithms for adjusting hypermedia document presentations. The algorithms explore the flexibility offered by some hypermedia models in the definition of media-object durations, choosing objects to be stretched or shrunk in order to obtain the best possible quality of presentation. Our proposals are based on the “out-of-kilter” method for minimum-cost flow problems on temporal graphs. An aggregation procedure enhances the basic algorithm offering more flexibility in modeling real-life situations in comparison with other previous work based on linear programming.     

A virtual environment for decision support in ship damage control.

Safety is one of the main concerns in maritime activity. Although the safety of a ship may be determined by many uncontrollable factors (such as weather or human error), efficient and continuous monitoring of shipboard systems and the current safety status is crucial to avoid or at least minimize the effects. Most modern ships have a Damage Control Center onboard where the crew monitors ship systems and structures and coordinates emergency teams. The Damage Control Center has information about the compartments, tanks and ducts arrangements, stability diagrams, evacuation plans, and so on. The paper describes that the virtual ship is a virtual environment that supports emergency planning decisions in a ship's Damage Control Center. The model considers what could occur when fluids disseminate through a ship's compartments, such as flooding, fire, or contamination.