SURFACE ANALYSIS OF INHIBITOR FILMS FORMED BY N-(2-HYDROXYBENZILIDENE) THIOSEMICARBAZIDE ON CARBON STEEL IN ACIDIC MEDIA

The corrosion and behavior of carbon steel in 2 M HCl in the presence of N-(2-hydroxybenzilidene) thiosemicarbazide (HBTC) was investigated using weight loss and electrochemical studies. The morphology of carbon steel surface was investigated using scanning electron microscopy (SEM) and Mössbauer spectrometry. The corrosion current was determined using Tafel polarization. The inhibition efficiency increased with HBTC concentration; the experimental results suggest that the presence of HBTC in the solution increases the surface coverage (θ); a decrease in the corrosion spot with the increase of the HBTC concentration indicates good adsorbability of HBTC on the metal surface. The adsorption of this compound on the metal surface is found to obey Langmuir's adsorption isotherm. Mössbauer spectroscopy showed at this stage the main product of corrosion is a non-stoichiometric amorphous Fe³⁺ oxyhydroxide, consisting of a mixture of α, β, and γ-FeOOH, where γ-FeOOH is the main phase.     

Effect of cinnamate comonomers on the dental formulation properties

This study reports the synthesis and characterization of two urethane dimethacrylates containing poly(ethylene oxide) or poly(propylene oxide) segment and cinnamate pendant moieties to be formulated in dental resin composites. ¹H NMR, ¹³C NMR, and Fourier transform infrared spectroscopies, gel permeation chromatography, electrospray ionization‐mass spectroscopy, and thermogravimetric measurements confirmed their structure, whereas the photopolymerization evolution of oligodimethacrylates relating to a low–molecular‐weight dicinnamate methacrylate under ultraviolet irradiation was investigated by photo‐differential scanning calorimeter, monitoring the degree of conversion (DC) and polymerization rate. The photopolymerization results reveal that the investigated derivatives display a good photoreactivity (DC: ～ 70%) during the formation of crosslinked polymers, the DC depending especially on the sample viscosity. The polymerization shrinkage for several mixtures including the urethane oligocinnamates (20 wt %) and diglycidyl methacrylate of bisphenol A/triethyleneglycol dimethacrylate system in the absence of filler was determined, the obtained values being in the range of 6.1–8.2 vol %. For few cured specimens incorporating quartz filler (75 wt %), water sorption/solubility, contact angle, and mechanical parameters were measured to establish if such monomers could be of interest in dentistry. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Study of the conversion of aromatic hydrocarbons on EMT-type zeolite: Influence of the partial substitution of Al by Ga

(Al,Ga)EMT-type zeolites (Al:Ga = 1:0, 0.75:0.25 and 0.5:0.5) were prepared and tested as catalysts in the gas-phase toluene–methanol alkylation and toluene–trimethylbenzene transalkylation. Various techniques including XRD, N₂ sorption, MAS NMR and SEM were used to monitor the physico-chemical properties of these solids. The results revealed a high purity and crystallinity of the materials, and that the Ga atoms are entirely incorporated into the framework. The ammonia TPD measurements indicated that the isomorphous substitution of aluminium by gallium leads to a decrease of both acidic strength and acid sites concentration. The catalytic performances of the EMT-type solids in the conversion of methylaromatic hydrocarbons were correlated with their acid properties. Thus, the less acidic (Al,Ga)EMT samples exhibited a lower activity, but a higher selectivity towards the xylenes formation by comparison with (Al)EMT.     

Temperature-dependent R-curve behavior of Pb(Zr1−xTix)O3

The crack growth resistance behavior of polycrystalline Pb(Zr_1?xTi_x)O₃ has been characterized in a novel experimental arrangement between 24 and 140 °C. Experimental measurements were carried out on compact tension specimens submerged in a temperature-controlled silicone oil bath. The results show a decrease in the observed shielding toughness, leading to an overall reduction in the maximum toughness. The temperature-dependent stress–strain behavior and elastic properties were characterized, providing an insight into the effect of the changing ferroelastic properties on the temperature-dependent fracture behavior.     

Survey of MRI Usefulness for the Clinical Assessment of Bone Microstructure

Bone microarchitecture has been shown to provide useful information regarding the evaluation of skeleton quality with an added value to areal bone mineral density, which can be used for the diagnosis of several bone diseases. Bone mineral density estimated from dual-energy X-ray absorptiometry (DXA) has shown to be a limited tool to identify patients’ risk stratification and therapy delivery. Magnetic resonance imaging (MRI) has been proposed as another technique to assess bone quality and fracture risk by evaluating the bone structure and microarchitecture. To date, MRI is the only completely non-invasive and non-ionizing imaging modality that can assess both cortical and trabecular bone in vivo. In this review article, we reported a survey regarding the clinically relevant information MRI could provide for the assessment of the inner trabecular morphology of different bone segments. The last section will be devoted to the upcoming MRI applications (MR spectroscopy and chemical shift encoding MRI, solid state MRI and quantitative susceptibility mapping), which could provide additional biomarkers for the assessment of bone microarchitecture.     

Local versus Global in Quasi-Conformal Mapping for Medical Imaging

A method and algorithm of flattening folded surfaces, for two-dimensional representation and analysis of medical images, are presented. The method is based on an application to triangular meshes of classical results of Gehring and Väisälä regarding the existence of quasi-conformal and quasi-isometric mappings.The proposed algorithm is basically local and, therefore, suitable for extensively folded surfaces encountered in medical imaging. The theory and algorithm guarantee minimal distance, angle and area distortion. Yet, the algorithm is relatively simple, robust and computationally efficient, since it does not require computational derivatives. Both random-starting-point and curvature-based versions of the algorithm are presented.We demonstrate the algorithm using medical data obtained from real CT images of the colon and MRI scans of the human cortex. Further applications of the algorithm, for image processing in general are also considered. The globality of this algorithm is also studied, via extreme length methods for which we develop a technique of computing straightest geodesics on polyhedral surfaces.     

Spreading of partially coherent beams in random media

Some published computational work has suggested that partially coherent beams may be less susceptible to distortions caused by propagation through random media than fully coherent beams. In this paper this suggestion is studied quantitatively by examining the mean squared width of partially coherent beams in such media as a function of the propagation distance. The analysis indicates under what conditions, and to what extent, partially coherent beams are less affected by the medium.