Multilayer Graphene Broadband Terahertz Modulators with Flexible Substrate

Fabrication of terahertz modulators as simple devices with high modulation depth across a broad bandwidth is still very challenging. In this study, four different chemical vapor deposition grown multilayer graphene (MLG) modulators based on MLG/ionic liquid/gold sandwich structures have been investigated. Flexible substrates (PVC and PE) were chosen as host materials, and devices were fabricated with three different thicknesses. The resultant MLG devices can be operated at low voltages between 0 and 3.4 V providing nearly complete modulation between 0.2 and 1.5 THz with low insertion losses. Even with such low gate voltages, the devices have been doped significantly inducing 7–11-fold improvement in their sheet conductivities depending on device thickness. In addition, sheet conductivity has been improved more than three times as the graphene layer number increased from 30 to 100. With the demonstration of promising device performances, the proposed modulators can be potential candidates for applications in terahertz and related optoelectronic technologies.     

Constituents,Oxidant-Antioxidant Profile,and Antimicrobial Capacity of the Essential Oil Obtained from Ferulago Sandrasica Peşmen and Quézel

Chemical constituents, total phenolic content, total oxidant status, total antioxidant status, lipid hydroperoxides, total free –SH levels, and antimicrobial activity of essential oil obtained from the Ferulago sandrasica (Umbelliferae) were investigated. The essential oil was obtained by hydrodistillation using a Clevenger-type apparatus. The chemical constituents were analyzed by gas chromatography‐mass spectrometry. The main components of the essential oil were ocimene (30.5%), carene-δ-3 (27.4%), and α-pinene (17.8). The antimicrobial activity was tested by a disc diffusion method against E. coli MC 400, E. coli ATCC 25922, E. coli 0157 H7, E. colaecea ATCC 23355, E. feacalis ATCC 19433, P. aeruginosa NRRL B-2679, S. aureus ATCC 25923, B. nischenoformis NRRL B-1001, S. aureus ATCC 33862, B. cereus NRRL B-3711, B. subtilis NRRL B-209, M. luteus NRRL B-1013, L. monocytogenes ATCC 7644, B. subtulis ATCC 6633.     

Plastid Transformation of Micro-Tom Tomato with a Hemipteran Double-Stranded RNA Results in RNA Interference in Multiple Insect Species

Plant-mediated RNA interference (RNAi) holds great promise for insect pest control, as plants can be transformed to produce double-stranded RNA (dsRNA) to selectively down-regulate insect genes essential for survival. For optimum potency, dsRNA can be produced in plant plastids, enabling the accumulation of unprocessed dsRNAs. However, the relative effectiveness of this strategy in inducing an RNAi response in insects using different feeding mechanisms is understudied. To investigate this, we first tested an in vitro-synthesized 189 bp dsRNA matching a highly conserved region of the v-ATPaseA gene from cotton mealybug (Phenacoccus solenopsis) on three insect species from two different orders that use leaf-chewing, lacerate-and-flush, or sap-sucking mechanisms to feed, and showed that the dsRNA significantly down-regulated the target gene. We then developed transplastomic Micro-tom tomato plants to produce the dsRNA in plant plastids and showed that the dsRNA is produced in leaf, flower, green fruit, red fruit, and roots, with the highest dsRNA levels found in the leaf. The plastid-produced dsRNA induced a significant gene down-regulation in insects using leaf-chewing and lacerate-and-flush feeding mechanisms, while sap-sucking insects were unaffected. Our results suggest that plastid-produced dsRNA can be used to control leaf-chewing and lacerate-and-flush feeding insects, but may not be useful for sap-sucking insects.     

Fatigue damage in composite cylinders

In this study, optimal angle‐ply orientation of symmetric composite cylinders under fatigue loading is investigated. The fiber‐reinforced plastic cylinders were manufactured from E‐glass/epoxy. The layers were manufactured symmetrically in [±75°]₂, [±60°]₂, [±55°]₂, and [±45°]₂ orientations. Burst pressure of filament‐wound composite cylinders under alternating pure internal pressure was measured experimentally. Internal fatigue pressure testing method was applied to the composite cylinders in close‐ended condition. For this study, a PLC controlled hydraulic pressure testing machine has been employed. The static burst pressure values of specimens were measured; subsequently, fatigue test pressure was applied in 70, 60, and 50% stress levels of burst pressure for each orientation. Damage propagations of the composite cylinders on these stress levels were observed as whitening, leakage, and final failure for [±60°]₂, [±55°]₂, and orientations. When the damage propagation of [±75°]₂ angle‐ply cylinder was observed, whitening and leakage did not occur and final failure occurred suddenly. Stress‐cycle curves obtained from the tests are given in graphics. Experimental results reveal that variation in stress levels and the winding angles have considerable effects on final failure cycles, which is also presented graphically. The optimum winding angle for the composite pressure cylinders or vessels under internal fatigue pressure load was obtained as [±45°]₂ orientation. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Geometric mean vs. Arithmetic mean in extrusion residence time studies

Geometric mean residence time was compared with the arithmetic mean residence time for a residence time distribution study conducted on a twin‐screw extruder using a salt tracer and electrical conductivity measurements. Electrical conductivity of the cornmeal melt was measured at the die exit. All RTD curves obtained during the study were skewed to the right with very long tails that resulted in inflated arithmetic mean residence times. In order to alleviate the problem of long tails, different approaches were considered. Among these approaches, logarithmic transformation of the time scale to calculate the geometric mean residence time was shown to best represent the residence time distribution in terms of mean residence time and spread of the RTD. The log transformation of the time scale alleviates the problem of inappropriate shifting of the mean residence time due to long tails. The difference between the upper limits and lower limits for the log transformed data was found to be more appropriate to define the spreads of the distributions as the untransformed data resulted in quite variable spreads.     

Molecular Genetics of Conjunctival Melanoma and Prognostic Value of TERT Promoter Mutation Analysis

The aim of this study was exploration of the genetic background of conjunctival melanoma (CM) and correlation with recurrent and metastatic disease. Twenty-eight CM from the Rotterdam Ocular Melanoma Study group were collected and DNA was isolated from the formalin-fixed paraffin embedded tissue. Targeted next-generation sequencing was performed using a panel covering GNAQ, GNA11, EIF1AX, BAP1, BRAF, NRAS, c-KIT, PTEN, SF3B1, and TERT genes. Recurrences and metastasis were present in eight (29%) and nine (32%) CM cases, respectively. TERT promoter mutations were most common (54%), but BRAF (46%), NRAS (21%), BAP1 (18%), PTEN (14%), c-KIT (7%), and SF3B1 (4%) mutations were also observed. No mutations in GNAQ, GNA11, and EIF1AX were found. None of the mutations was significantly associated with recurrent disease. Presence of a TERT promoter mutation was associated with metastatic disease (p-value = 0.008). Based on our molecular findings, CM comprises a separate entity within melanoma, although there are overlapping molecular features with uveal melanoma, such as the presence of BAP1 and SF3B1 mutations. This warrants careful interpretation of molecular data, in the light of clinical findings. About three quarter of CM contain drug-targetable mutations, and TERT promoter mutations are correlated to metastatic disease in CM.     

Electrochemical and spectroscopic characterization of a Benzo[c]cinnoline electrografted platinum surface

In this work, a platinum surface was modified with benzo[c]cinnoline (BCC) to get new insight into the metal modification area. By potential scanning from + 0.4 V to - 0.8 V, the diazotized BCC was reduced electrochemically and grafted onto the platinum electrode surface to form benzo[c]cinnoline modified platinum electrode (Pt-BCC). Electrochemical reduction of benzo[c]cinnoline diazonium salt on the electrode surface yielded a relatively stable organic film. The introduction of BCC molecules onto the platinum surface was verified by cyclic voltammetry, electrochemical impedance spectroscopy, Raman spectroscopy and ellipsometry. The stability and the potential range of the Pt-BCC electrode were also studied.     

Teacher beliefs and technology integration practices: A critical relationship

Early studies indicated that teachers’ enacted beliefs, particularly in terms of classroom technology practices, often did not align with their espoused beliefs. Researchers concluded this was due, at least in part, to a variety of external barriers that prevented teachers from using technology in ways that aligned more closely with their beliefs. However, many of these barriers (access, support, etc.) have since been eliminated in the majority of schools. This multiple case-study research was designed to revisit the question, “How do the pedagogical beliefs and classroom technology practices of teachers, recognized for their technology uses, align?”