Galvanic corrosion of aluminium alloy members of bridge guiderails under severe atmospheric exposure conditions

ABSTRACT

Aluminium alloys are nowadays preferred as materials for bridge guiderails especially for bridges connecting oceanic islands or spanning inlets due to their inherent corrosion resistance. But because of the limited mechanical strength of aluminium alloy, fasteners of guiderail members are made from steel materials. It has been found that contact between bare steel fasteners and aluminium alloy members can cause galvanic corrosion in the aluminium alloy. Research was carried out to investigate the capability of different surface treatments on fasteners and aluminium alloy members to inhibit galvanic corrosion under atmospheric exposure for periods of one and three years. It was found, among other results, that stainless steel fasteners treated with zinc flake coating were the most effective inhibitors of galvanic corrosion on aluminium alloy members.     

Electrochemical nitrite nanosensor developed with amine- and sulphate-functionalised polystyrene latex beads self-assembled on polyaniline

Aniline doped with polyvinyl sulphonate (PV-SO₃⁻) was electropolymerised on screen printed carbon (SPCE) and glassy carbon (GCE) electrodes. Then nano-structured polystyrene (PS_NP) latex beads functionalised with amine (PS_NP-NH₂) and sulphate (PS_NP-OSO₃⁻) were self-assembled on the modified SPCE and GCE. The resultant polyaniline nanocomposites (PANI|PS_NP-NH₂ or PANI|PS_NP-OSO₃⁻) were characterised by cyclic voltammetry (CV), UV-vis spectroscopy and scanning electron microscopy (SEM). Brown-Anson analysis of the multi-scan rate CV responses of the various PANI films gave surface concentrations of the order of 10⁻⁸ mol cm⁻². UV-vis spectra of the PANI films dissolved in dimethyl sulphoxide showed typical strong absorbance maxima at 480 and 740 nm associated with benzenoid π-π* transition and quinoid excitons of polyaniline, respectively. The SEM images of the PANI nanocomposite films showed cauliflower-like structures that are <100 nm in diameter. When applied as electrochemical nitrite sensor, sensitivity values of 60, 40 and 30 μA/mM were obtained for electrode systems containing PANI|PS_NP-NH₂, PANI and PANI|PS_NP-SO₃⁻, respectively. The corresponding limits of detection of the sensors were 7.4, 9.2 and 38.2 μM NO₂⁻.     

TNFα-Induced LDL Cholesterol Accumulation Involve Elevated LDLR Cell Surface Levels and SR-B1 Downregulation in Human Arterial Endothelial Cells

Excess lipid droplets are frequently observed in arterial endothelial cells at sites of advanced atherosclerotic plaques. Here, the role of tumor necrosis factor alpha (TNFα) in modulating the low-density lipoprotein (LDL) content in confluent primary human aortic endothelial cells (pHAECs) was investigated. TNFα promoted an up to 2 folds increase in cellular cholesterol, which was resistant to ACAT inhibition. The cholesterol increase was associated with increased ¹²⁵I-LDL surface binding. Using the non-hydrolysable label, Dil, TNFα could induce a massive increase in Dil-LDL by over 200 folds. The elevated intracellular Dil-LDL was blocked with excess unlabeled LDL and PCSK9, but not oxidized LDL (oxLDL), or apolipoprotein (apoE) depletion. Moreover, the TNFα-induced increase of LDL-derived lipids was elevated through lysosome inhibition. Using specific LDLR antibody, the Dil-LDL accumulation was reduced by over 99%. The effects of TNFα included an LDLR cell surface increase of 138%, and very large increases in ICAM-1 total and surface proteins, respectively. In contrast, that of scavenger receptor B1 (SR-B1) was reduced. Additionally, LDLR antibody bound rapidly in TNFα-treated cells by about 30 folds, inducing a migrating shift in the LDLR protein. The effect of TNFα on Dil-LDL accumulation was inhibited by the antioxidant tetramethythiourea (TMTU) dose-dependently, but not by inhibitors against NF-κB, stress kinases, ASK1, JNK, p38, or apoptosis caspases. Grown on Transwell inserts, TNFα did not enhance apical to basolateral LDL cholesterol or Dil release. It is concluded that TNFα promotes LDLR functions through combined increase at the cell surface and SR-B1 downregulation.     

Modelling tempering behaviour of dark chocolates from varying particle size distribution and fat content using response surface methodology

Central Composite Rotatable Design (CCRD) for K = 2 was used to study the combined effects of multi-stage heat exchangers for Stages 1 (14–30 °C) and 2 (12–28 °C) coolant temperatures at constant Stage 3 coolant and holding temperatures during tempering of dark chocolates using laboratory-scale mini-temperer. Quantitative data on chocolate temper index (slope) were obtained for products with varying particle size distribution (PSD) (D₉₀ of 18, 25, 35 and 50 μm) and fat (30% and 35%) content. Regression models generated using stepwise regression analyses were used to plot response surface curves, to study the tempering behaviour of products. The results showed that both Stage 1 and Stage 2 coolant temperatures had significant linear and quadratic effects on the crystallization behaviour causing wide variations in chocolate temper index during tempering of products with variable PSD and fat content. Differences in fat content exerted the greatest variability in temperature settings of the different zones for attaining well-tempered products. At 35% fat content, changes in PSD caused only slight and insignificant effect on tempering behaviour. No unique set of conditions was found to achieve good temper in dark chocolate with a specified tempering unit. Thus, different combinations of temperatures could be employed between the multi-stage heat exchangers to induce nucleation and growth of stable fat crystal polymorphs during tempering. Variations in tempering outcomes of the dark chocolates were dependent more on the fat content than PSD.

Industrial relevance

Tempering consists of shearing chocolate mass at controlled temperatures to promote cocoa butter crystallization in a stable polymorphic form. During industrial processing, multi-stage heat exchangers are used to control temperature adjustments to promote formation of appropriate stable polymorphic crystals to obtain products with good snap, colour, contraction, gloss and shelf life characteristics. The process employs varying time–temperature throughputs of the multi-stage units making it difficult to obtain standard tempering conditions for products with variable particle sizes and fat content, thus prolonging equipment standardization periods with consequential effects on processing times and product quality characteristics. Modelling the tempering behaviour of dark chocolates from varying PSD and fat content would enhance our knowledge and understanding on the optimal temperature conditions for obtaining good tempered products during industrial manufacture, with significance for reducing processing (tempering) times and assurances in quality and shelf characteristics.     

Short-term toxicological evaluation of Terminalia catappa, Pentaclethra macrophylla and Calophyllum inophyllum seed oils in rats

The purpose of this study was to evaluate the toxicological effects of feeding the oils of Calophyllum inophyllum, Pentaclethra macrophylla and Terminalia catappa to rats. The effects on physical appearance, feed intake, weight gain, plasma and tissue cholesterol and triacyglycerol levels in rats with 5% of the oils in normal rat feed were determined. Weekly monitoring of the rats showed good physical appearance and steady weight gain, with no mortality recorded for the period of the study. Haematological analysis of the rats indicated that they were not anaemic. Histopathotogical examination of the sections of the heart, liver, kidney and spleen revealed moderate (T. catappa oil) to severe fatty change and necrosis in the liver. Glomerulonephrotic changes in the kidneys of rats fed with T. catappa oil were moderate, while it was severe in the group fed with P. macrophylla oil. Severe myocardiac necrosis as well as atherosclerotic clefts in vasa vasori was observed in the vasa vasori of the hearts of rats fed with P. macrophylla oil. This change was moderate in the heart of rats fed with C. inophyllum, while no such observation was made in the group fed with T. catappa oil. There was a significant difference in the plasma cholesterol levels of the rats fed with C. inophyllum and T. catappa oils when compared with the control rats, while those fed with P. macrophylla oil had no significant difference. The oil of T. catappa appears more suitable for consumption than the oils from C. inophyllum and P. macrophylla. Fatty acid analysis of the oils showed that they have high amounts of unsaturated fatty acids with linoleic and oleic acids as the major ones.     

Absorbing photonic crystals for silicon thin-film solar cells: Design,fabrication and experimental investigation

In this paper, we present the integration of an absorbing photonic crystal within a thin-film photovoltaic solar cell. Optical simulations performed on a complete solar cell revealed that patterning the hydrogenated amorphous silicon active layer as a 2D photonic crystal membrane enabled to increase its integrated absorption by 28 % between 300 and 720 nm, comparing to a similar but unpatterned stack. In order to fabricate such promising cells, we developed a high throughput process based on holographic lithography and reactive ion etching. The influences of the parameters taking part in those processes on the obtained patterns are discussed. Optical measurements performed on the resulting “photonized” solar cell structures underline the regularity of the 2D pattern and a significant absorption increase above 550 nm, similarly to what is observed on the simulated absorption spectra. Moreover, our patterned cells are found to be robust with regards to the angle of incidence of the light.     

Biosorptive removal of Pband Cd onto novel biosorbent: Defatted Carica papaya seeds

Carica papaya seeds, an agricultural waste in Nigeria, were defatted to obtain defatted C. papaya seed biosorbent. The Fourier Transformed Infrared spectrum of defatted C. papaya seed biosorbent suggests the presence of CO, OH of carboxylic acid, lactonic and amide band functional groups. The adsorption of metal ion onto defatted C. papaya seed biosorbent led to small shifts in the IR bands. The adsorption capacity of defatted C. papaya seed biosorbent was evaluated to be 1666.67 mg/g for Pb²⁺ and 1000.00 mg/g for Cd²⁺. In binary metal ion solution, the defatted C. papaya seeds showed decreased adsorption capacity for either metal ion. The influence of different particle sizes was found to have negative impact on the adsorption capacity of C. papaya seed biosorbent in the removal of Pb²⁺ and Cd²⁺ from aqueous solution. The adsorption of both metal ions was observed to follow the Freudlich model better than the Langmuir model suggesting that the adsorption of both metal ions was on multisites on the defatted C. papaya seed biosorbent. The adsorption was found to be highly feasible, spontaneous and exothermic in nature. Optimization results suggests 5 m³ of 100 mg/L of Pb²⁺ and Cd²⁺ requires 43.3 and 49.2 kg of defatted C. papaya seeds to remove 95% of the metal ions from aqueous solution.     

Biosorption of Methyl violet onto palm kernel fiber: Diffusion studies and multistage process design to minimize biosorbent mass and contact time

Determination of the overall rate controlling step in the biosorption of Methyl violet dye onto a new biosorbent, palm kernel fiber has been determined. Pseudo-second-order model described the kinetics over the whole contact time period for the effect of initial concentration and temperature. Using the Wu’s approaching equilibrium factor, R_w, it was observed that the time for the switch from initial biosorption to intraparticle diffusion is affected by initial concentration and temperature. A comparison between the activation parameters of film diffusion, pseudo-second order ion exchange and intraparticle diffusion revealed that film diffusion is the overall slowest step in the biosorption process. Temperature increased the biosorption capacity but reduced slightly the rate of intraparticle diffusion, indicating that the biosorbent surface was activated by temperature which limited the diffusion of Methyl violet molecules into the interior of the biosorbent. A multistage process design to minimize mass and contact time was done.     

Microbiological quality of tomatoes and peppers produced under the good agricultural practices protocol AGRO 2-1 & 2-2 in Crete, Greece

The efficiency of the good agricultural practices (GAP) protocol AGRO 2-1 & 2-2, in advancing microbiological-quality of tomatoes and peppers, was studied in greenhouses at Ierapetra, Crete, Greece. The 240 tested vegetables-samples, produced under AGRO 2-1 & 2-2, showed satisfactory quality: Listeria monocytogenes absent per 25 g; Escherichia coli < 20 Colony Forming Units per gram (CFU/g); total coliforms 4.37–4.68 log CFU/g; aerobic plate counts 5.78–5.92 log CFU/g. Based on actual results and practices evaluation, we conclude that AGRO 2-1 & 2-2 can reduce microbial hazards for consumers and furthermore can establish practices in compliance to basic Euro-Retailer-Produce GAP (EUREPGAP) requirements.     

Seasonal dynamics of physico-chemical characteristics and biological responses of Lake Chilwa,Southern Africa

Lake Chilwa is shared by Malawi and Mozambique, it supports an important fishery and its watershed is undergoing rapid population growth and increasing utilization for agricultural production. It is a shallow, closed basin lake with extensive surrounding wetlands; and it has suffered several desiccation events in the last century. To better understand the current condition of the lake, we monitored a suite of physical, chemical and biological parameters at approximately monthly intervals over an annual cycle in 2004–2005. The limnology of the lake was extremely sensitive to seasonal changes in the lake's seasonal hydrological cycle. The physico-chemical parameters, temperature, electrical conductivity, and total suspended solids exhibited clear seasonal patterns driven by the highly seasonal rainfall and resultant lake levels. In response, phytoplankton and zooplankton abundance, as well as biologically dependent oxygen concentrations and pH, exhibited several maxima levels over the year. The peaks of phytoplankton and zooplankton were out of phase suggesting a lag in the zooplankton grazing in response to pulses in primary productivity. Chlorophyll concentrations can exceed 1 mg/L in surface waters indicative of hypereutrophic conditions, but they fell dramatically during zooplankton peaks. This hydrologically driven, shallow and mesohaline lake is a productive and critical resource to the region. Its management poses challenges arising from the dependence of its limnology and fishery on the lakes hydrology, catchment land use and climate variability.