Strong dependence on pressure of the performance of a Co/SiO2 catalyst in Fischer–Tropsch slurry reactor synthesis

A 10 wt% Co/SiO₂ catalyst was prepared by the incipient wet-impregnation method and tested in Fischer–Tropsch synthesis in a slurry reactor under conditions approaching industrial practice. The catalyst precursor was investigated by X-ray diffraction (XRD), temperature-programmed reduction (TPR), transmission electron microscopy (TEM) and photoelectron spectroscopy (XPS). The XPS and XRD techniques revealed the presence of a crystalline Co₃O₄ spinel-type phase, while-in addition-TEM and XPS analyses pointed to the formation of another amorphous Co₃O₄ spinel phase, both species interacting weakly with the silica substrate. The influence of total pressure on the conversion, selectivity and stability of the catalyst was studied. Upon increasing the overall pressure from 20 to 40 bar, not only activity increased but also the catalyst are not deactivating. These results are explained in terms of an increase of gases solubility in the solvent, this increment of CO concentration in the liquid phase favours carbonyl species formation and the cobalt particles segregation that implies an increase in the metal surface area.     

Styrene-butadiene branched star-shaped asphalt modifiers: Synthesis and mechanical characterization

Abstract

The synthesis and the corresponding characterization of styrene-butadiene (SB), branched, star-shaped copolymers was investigated as part of a research project on asphalt modification using polymers with precise molecular structures. The method of anionic polymerization was followed to prepare samples of block copolymers of SB, a synthesis method that controls chain-architecture, molecular weight distribution, monomer distribution, and the average molecular weight. The research studies are the synthesis of block copolymers including linear, three- and four-arms constructs, depending on the coupling agent used. The techniques of nuclear magnetic resonance (1NMR), differential scanning calorimetry (DSC), gel permeation chromatography (GPC), and rheology were carried out to characterize the copolymers. From the results of the 1NMR, DSC, and GPC analyses, all star-shaped copolymers investigated showed a similar block copolymer composition. Furthermore, the rheological behavior of one of the synthesized star-shaped copolymers was nearly the same as a four-branched commercial copolymer. Rheologically, the four-arm block copolymer sample had the largest storage modulus (G′) among the branched copolymers synthetized, indicating that such architecture produces a highly structured material. In regard to polymer-modified asphalt formulations, the three-branched copolymer architecture yielded better elastic behavior than the four-branch version. In summary, the findings of this investigation provide new insight about a polymer system that may offer advantages in industrial asphalt paving applications.     

A 2D algorithm with asymmetric workload for the UPC conjugate gradient method

This paper examines four different strategies, each one with its own data distribution, for implementing the parallel conjugate gradient (CG) method and how they impact communication and overall performance. Firstly, typical 1D and 2D distributions of the matrix involved in CG computations are considered. Then, a new 2D version of the CG method with asymmetric workload, based on leaving some threads idle during part of the computation to reduce communication, is proposed. The four strategies are independent of sparse storage schemes and are implemented using Unified Parallel C (UPC), a Partitioned Global Address Space (PGAS) language. The strategies are evaluated on two different platforms through a set of matrices that exhibit distinct sparse patterns, demonstrating that our asymmetric proposal outperforms the others except for one matrix on one platform.     

Dissecting the protocol and network traffic of the OnLive cloud gaming platform

Cloud gaming is a new paradigm that is envisaged to play a pivotal role in the video game industry in forthcoming years. Cloud gaming, or gaming on demand, is a type of online gaming that allows on-demand streaming of game content onto non-specialised devices (e.g. PC, smart TV, etc.). This approach requires no downloads or game installation because the actual game is executed on the game company’s server and is streamed directly to the client. Nonetheless, this revolutionary approach significantly affects the network load generated by online games. As cloud gaming presents new challenges for both network engineers and the research community, both groups need to be fully conversant with these new cloud gaming platforms. The purpose of this paper is to investigate OnLive, one of the most popular cloud gaming platforms. Our key contributions are: (a) a review of the state-of-the-art of cloud gaming; (b) reverse engineering of the OnLive protocol; and (c) a synthetic traffic model for OnLive.     

Volatile Emissions Triggered by Multiple Herbivore Damage: Beet Armyworm and Whitefly Feeding on Cotton Plants

Plants are commonly attacked by more than one species of herbivore, potentially causing the induction of multiple, and possibly competing, plant defense systems. In the present paper, we determined the interaction between feeding by the phloem feeder silverleaf whitefly (SWF), Bemisia tabaci Gennadius (B-biotype = B. argentifolii Bellows and Perring), and the leaf-chewing beet armyworm (BAW), Spodoptera exigua Hübner, with regard to the induction of volatile compounds from cotton plants. Compared to undamaged control plants, infestation with SWF did not induce volatile emissions or affect the number and density of pigment glands that store volatile and nonvolatile terpenoid compounds, whereas infestation by BAW strongly induced plant volatile emission. When challenged by the two insect herbivores simultaneously, volatile emission was significantly less than for plants infested with only BAW. Our results suggest that tritrophic level interactions between cotton, BAW, and natural enemies of BAW, that are known to be mediated by plant volatile emissions, may be perturbed by simultaneous infestation by SWF. Possible mechanisms by which the presence of whiteflies may attenuate volatile emissions from caterpillar-damaged cotton plants are discussed.     

Calmodulin Supports TRPA1 Channel Association with Opioid Receptors and Glutamate NMDA Receptors in the Nervous Tissue

Transient receptor potential ankyrin member 1 (TRPA1) belongs to the family of thermo TRP cation channels that detect harmful temperatures, acids and numerous chemical pollutants. TRPA1 is expressed in nervous tissue, where it participates in the genesis of nociceptive signals in response to noxious stimuli and mediates mechanical hyperalgesia and allodynia associated with different neuropathies. The glutamate N-methyl-d-aspartate receptor (NMDAR), which plays a relevant role in allodynia to mechanical stimuli, is connected via histidine triad nucleotide-binding protein 1 (HINT1) and type 1 sigma receptor (σ1R) to mu-opioid receptors (MORs), which mediate the most potent pain relief. Notably, neuropathic pain causes a reduction in MOR antinociceptive efficacy, which can be reversed by blocking spinal NMDARs and TRPA1 channels. Thus, we studied whether TRPA1 channels form complexes with MORs and NMDARs that may be implicated in the aforementioned nociceptive signals. Our data suggest that TRPA1 channels functionally associate with MORs, delta opioid receptors and NMDARs in the dorsal root ganglia, the spinal cord and brain areas. These associations were altered in response to pharmacological interventions and the induction of inflammatory and also neuropathic pain. The MOR-TRPA1 and NMDAR-TRPA1 associations do not require HINT1 or σ1R but appear to be mediated by calcium-activated calmodulin. Thus, TRPA1 channels may associate with NMDARs to promote ascending acute and chronic pain signals and to control MOR antinociception.     

Separation of Triacylglycerol Species from Interesterified Oils by High-Performance Liquid Chromatography

Using a 1,3-regioselective lipase as a catalyst, soybean oil and olive oil were interesterified with the short-chain triacylglycerol tributyrin (1,2,3-tributyrylglycerol) to produce mixtures of structured triacylglycerols (SL-TAG). The SL-TAG were purified by column chromatography and analyzed by both normal-phase (silica column; NP_SIL) and reversed-phase [octadecyl silane (ODS) column] high-performance liquid chromatography (HPLC). Individual SL-TAG molecular species were detected by evaporative light-scattering detection, and characterized by mass spectrometry. NP_SIL HPLC successfully separated the newly synthesized SL-TAG into two groups of TAG: one composed of one butyryl group and two long-chain fatty acyl groups (from soybean or olive oil); the second was composed of two butyryl groups and one long-chain fatty acyl group. The SL-TAG species were further analyzed by reversed-phase HPLC which gave a more detailed separation of the TAG species present in the two SL-TAG.     

Zeolite‐catalyzed isomerization of oleic acid to branched‐chain isomers

Branched‐chain (bc) saturated fatty acids (SFA) have potential as oleochemical intermediates since they have better oxidative stability than linear unsaturated fatty acids (UFA) and have better low‐temperature properties than linear SFA. Previous studies in converting UFA to bc‐FA using clay catalysts have resulted in only modest yields and conversions. Recent reports, however, have suggested that certain zeolites can be effective catalysts for converting UFA to bc‐FA in higher yields and conversions. In this work, we examined the scope and potential of the zeolite‐catalyzed synthesis of bc‐FA starting from readily available monounsaturated linear FA. Our results show that common UFA such as oleic acid can be converted to bc‐isomers using modified Ferrierite zeolite catalysts with high conversions (98%) and high selectivity (85%) and that the zeolite catalysts are reusable for at least three cycles. The positions of branching (methyl) on the FA chain were determined from the GC‐MS spectra of the picolinyl esters of the bc‐FA.     

Synthesis and biological activity of phthalimide‐based polymers containing 5‐fluorouracil

The attachment of anticancer agents to polymers is a promising approach towards reducing the toxic side‐effects and retaining the potent antitumour activity of these agents. A new tetrahydrophthalimido monomer containing 5‐fluorouracil (ETPFU) and its homopolymer and copolymers with acrylic acid (AA) and with vinyl acetate (VAc) have been synthesized and spectroscopically characterized. The ETPFU contents in poly(ETPFU‐co‐AA) and poly(ETPFU‐co‐VAc) obtained by elemental analysis were 21 mol% and 20 mol%, respectively. The average molecular weights of the polymers determined by gel permeation chromatography were as follows: M_n = 8900 g mol^?1, M_w = 13 300 g mol^?1, M_w/M_n = 1.5 for poly(ETPFU); M_n = 13 500 g mol^?1, M_w = 16 600 g mol^?1, M_w/M_n = 1.2 for poly(ETPFU‐co‐AA); M_n = 8300 g mol^?1, M_w = 11 600 g mol^?1, M_w/M_n = 1.4 poly(ETPFU‐co‐VAc). The in vitro cytotoxicity of the compounds against FM3A and U937 cancer cell lines increased in the following order: ETPFU > 5‐FU > poly(ETPFU) > poly(ETPFU‐co‐AA) > poly(ETPFU‐co‐VAc). The in vivo antitumour activities of all the polymers in Balb/C mice bearing the sarcoma 180 tumour cell line were greater than those of 5‐FU and monomer at the highest dose (800 mg kg^?1). © 2002 Society of Chemical Industry