Comparison on efficiency factors of F and C types of fly ashes

Fly ashes are obtained from thermal power plants and they are pozzolanic materials, which can act as partial replacement material for both portland cement and fine aggregate. With their economical advantages and potential for improving fresh and hardened concrete performance, they have some benefits for using in concrete industry. In this study, the objective was to find the efficiency factors of Turkish C and F-type fly ashes and to compare their properties. Three different cement dosages were used (260, 320, 400 kg/m³), two different ratios (10% and 17%) of cement reduced from the control concretes and three different ratios (depending on cement reduction ratio) of fly ash were added into the mixtures. At the ages of 28 and 90 days, compressive strength, modulus of elasticity and ultrasound velocity tests were carried out. From the compressive strength results, the k efficiency factors of C and F-type fly ashes were obtained. As a result, it is seen that efficiency factors of the concrete produced by the replacement of F and C type fly ashes with cement increase with the increase in cement dosage and concrete age.     

Zinc Oxide Nanowire Decorated Single‐Use Electrodes for Electrochemical DNA Detection

The surfaces of pencil graphite electrodes (PGEs) were decorated with zinc oxide nanowires (ZnO NWs) for the electrochemical detection of nucleic acids. ZnO NWs were synthesized through simple hydrothermal method. PGEs decorated with ZnO NWs (ZnO NW/PGEs) were electrochemically characterized through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) following morphological characterization through transmission (TEM) and scanning electron microscopy (SEM). Enhanced sensor response obtained using ZnO NW/PGEs contrary to the bare PGE (control) samples. Our preliminary results simply reveal the potential of combining ZnO NWs with disposable sensor technology for the electrochemical detection of DNA.     

The interplay between leadership and organizational culture in the Turkish construction sector

Organizational culture and leadership are purported to be deeply integrated and intertwined within an organization. Although there is a substantial amount of research demonstrating the importance of the interplay of culture and leadership, there exist few empirical examinations of the nature of this link. To examine this link, based on Cameron and Quinn's Organizational Culture Assessment Instrument and Hofstede's Values Survey Module, a questionnaire survey was conducted. The sample consists of 499 managerial personnel out of 107 contracting firms. With the aim of achieving a better understanding of how leadership style is influenced by organizational culture, Multinomial Logistic Regression was used. The findings demonstrate that managers in the contracting companies with different cultural characteristics tend to adopt different leadership styles to lead their employees to succeed in their business. Information contained in this paper will feed into country-specific understanding of leadership and organizational culture within the construction industry.     

Efficiency of Gold Nano Particles on the Autoxidized Soybean Oil Polymer: Fractionation and Structural Analysis

Polyunsaturated plant oils have gained great interest as monomers to produce biodegradable polymers obtained from renewable resources due to the limited existing sources of petroleum oil and environmental issues. Soybean oil was autoxidized by exposure to atomospheric oxygen at room temperature with or without the presence of gold nanoparticles (Au NPs) 5–41 days. When the autoxidation process was catalyzed with Au NPs, the molecular weight of the oxidized oil was increased in 5 days. In contrast to this, without Au NPs, the oxidized oil was still a fluidized liquid. Autoxidized soybean oil polymer in toluene solution with gold NP showed a surface plasmon resonance at λ_max = 540 nm in a UV–VIS spectrometer and a fluorescence emission spectrum at λ_max = 450 nm, when it was irradiated at λ_max = 390 nm. The higher molecular weight of the polymeric oils was successively fractionated by the extraction from the solvent‐non‐solvent mixture CHCl₃/petroleum ether with the volume ratio of 5:15. Three polymeric oils fractions with different molecular weight (ca 1000, 4000, and 40,000 g/mol) were obtained. GC–MS analysis, ¹H‐NMR and GPC techniques were used in the structural analysis of the fractionated polymeric oils.     

All Solution‐Based Fabrication of Copper Oxide Thin Film/Cobalt‐Doped Zinc Oxide Nanowire Heterojunctions

Versatile and intriguing solution‐based processes are utilized to synthesize nanostructured materials for device applications to reduce material production and device fabrication costs. This study presents results on the fabrication and characterization of copper oxide (CuO) coated cobalt‐doped zinc oxide nanowires (Co‐doped ZnO NWs)‐based heterojunction diodes prepared by a two‐step synthesis route through combined hydrothermal growth and sol–gel spin coating. Highly dense, well‐ordered, undoped, and Co‐doped ZnO NWs were successfully grown by hydrothermal method. Complementary CuO thin films were synthesized by sol–gel method and subsequently coated onto both undoped and Co‐doped ZnO NWs through spin‐coating technique. Enhanced diode properties with a rectification ratio of 10³ at ±2 V and an ideality factor of n = 2.4 (in dark) were obtained for Co‐doped ZnO NWs‐based heterojunction diodes. The obtained results demonstrated that the investigated heterojunction diode structure fabricated by facile and cost‐effective solution‐based processes can be a promising candidate for the next generation optoelectronic devices.     

Modelling the impact of land-cover change on potential soil loss in the Taita Hills,Kenya, between 1987 and 2003 using remote-sensing and geospatial data

In sub-Saharan Africa, natural vegetation is being transformed into agricultural lands at a fast rate, endangering ecosystem services and increasing soil-loss potential, which may trigger land degradation. For the Taita Hills study area in Kenya, multi-temporal land-cover models of 1987, 1999 and 2003, derived from Satellite Pour l'Observation de la Terre (SPOT) imagery using a multi-scale segmentation/object relationship modelling (MSS/ORM) methodology and a rainfall layer, a digital elevation model (DEM) and a digital soil map were applied to model potential soil loss. Population growth in the area has led to a shortage of agricultural land and movement of people to the lowlands, evidenced by a 39% (9.3 km²) increase in croplands from 30% to 41% of the study area during the research time frame. Expansion took place mostly in surrounding foothills and lowlands, at the expense of natural shrubland and grassland, but also occurred in the hills. Universal soil-loss equation (USLE) model results showed a 60% (4 km²) increase in the area of very high potential soil loss, from 7% of the study area in 1987 to 12% in 2003, due mainly to very high soil-loss potential in croplands. Whilst the area of croplands as a whole increased, the relative proportion of very high soil-loss potential in croplands remained 20%, both in 1987 and in 2003, indicating that newly cleared agricultural lands with vulnerable soils are the most at-risk areas.     

Packet Reservation Window Multiple Access for Microcellular Voice/Data Transmission

We propose a new packet reservation multiple access (PRMA) scheme for the joint transmission of voice and data traffics in a microcellular medium. The collision resolution protocol within the system is based on a modification of the window random access algorithm, which has superior properties compared to the conventional slotted Aloha. The proposed algorithm, which we call packet reservation window multiple access (PRWMA), works in distinct modes for voice and data without prioritization, and the user performs slightly different operations depending on the information type. Simulation results show that PRWMA outperforms PRMA by a significant margin in terms of voice user capacity.     

Quantitative atomic 3-D imaging of single/double sheet graphene structure

Graphene sheets can be regarded as base structure of many carbon nanostructures, and atomic arrangements and variations in the atomic structure have a drastic impact on their unique properties. Using a single/double layer graphene model structure, we present a strategy to “see” single carbon atoms in 3-D. In high-resolution transmission electron microscopy, exit-wave images are essential to obtain and to understand 3-D atomic structure. Using electrons at 80 kV not only minimizes the knock-on damage, but also improves the detection sensitivity due to the higher scattering power of carbon at lower acceleration voltage of the electron. Using experiments and image simulations, positions of individual carbon atoms in a single/double layer structure in graphene have been identified.     

Adaptive random access algorithm with improved delay performance

We propose an adaptive random access algorithm for mobile environments with capture. The algorithm has a dynamic window size which is updated according to the traffic intensity. The packet arrival rate is tracked by employing sequential detection procedures. Simulations indicate that reducing the window size adaptively under heavy load conditions improves the average delay significantly. Copyright © 2001 John Wiley & Sons, Ltd.