Effects of Mn and Gd Co-substituted into ZnO on Structural and Magnetic Properties

We have worked on the structural and magnetic properties of Zn_0.99?xMn_0.01Gd _x O _δ (for x = 0.02, 0.03, and 0.04) compounds prepared by using a sol–gel method. The x-ray diffraction, scanning electron microscopy, and energy dispersive x-ray spectroscopy were used to understand the structural properties of the samples. We observed that co-substitution of Mn (1 %) and Gd (2–4 %) into the ZnO does not change the hexagonal structure. Scanning electron microscope (SEM) images show us that the grain size decreases with the increasing amount of the Gd into the ZnO matrix. The magnetic properties of the samples have been investigated by using magnetic hysteresis and DC susceptibility measurements. The ZMG1 sample shows a weak ferromagnetic behavior at room temperature, whereas the ZMG2 and ZMG3 samples exhibit a paramagnetic nature. Furthermore, it is also found that the magnetizations of the samples decrease with increasing Gd content in the ZnMnO system due to the enhancing interaction between Gd ³⁺ ions. We summarize that the co-substitution of Mn and Gd into the ZnO generates a room-temperature ferromagnetism, but it still needs more work to obtain strong and high coercivity magnetic loops for applications.     

Effect of electroless etching parameters on the growth and reflection properties of silicon nanowires

Vertically aligned silicon nanowire (Si NW) arrays have been fabricated over large areas using an electroless etching (EE) method, which involves etching of silicon wafers in a silver nitrate and hydrofluoric acid based solution. A detailed parametric study determining the relationship between nanowire morphology and time, temperature, solution concentration and starting wafer characteristics (doping type, resistivity, crystallographic orientation) is presented. The as-fabricated Si NW arrays were analyzed by field emission scanning electron microscope (FE-SEM) and a linear dependency of nanowire length to both temperature and time was obtained and the change in the growth rate of Si NWs at increased etching durations was shown. Furthermore, the effects of EE parameters on the optical reflectivity of the Si NWs were investigated in this study. Reflectivity measurements show that the 42.8% reflectivity of the starting silicon wafer drops to 1.3%, recorded for 10 μm long Si NW arrays. The remarkable decrease in optical reflectivity indicates that Si NWs have a great potential to be utilized in radial or coaxial p-n heterojunction solar cells that could provide orthogonal photon absorption and enhanced carrier collection.     

Carotid-jugular arteriovenous fistula and cerebrovascular infarct: a case report of an iatrogenic complication following internal jugular vein catheterization

Central venous catheterization is frequently performed for perioperative management and long-term intravenous access. Although complications associated with central venous catheter insertion have been widely reported, there are few reports of carotid-jugular arteriovenous fistula formation. Endovascular procedures are associated with a risk of immediate and delayed thromboembolic and ischemic complications. We describe a case of a carotid-jugular arteriovenous fistula and a cerebrovascular infarct following the insertion of a double-lumen catheter for hemodialysis access. We provide recommendations for the prevention and the early detection of this iatrogenic complication.     

Neuroendocrine cell hyperplasia in colonic tissue used for long term augmentation cystoplasty

A case of torsion of the wandering spleen with splenic infarction is reported. The medical imaging studies performed with typical findings are described. Case reports have been reviewed. Although rare, torsion of the spleen remains an important differential diagnosis in patients presenting with acute abdominal pain. Early intervention is necessary to reduce the risk of splenic infarction and other complications, and an increased awareness of the condition together with the use of appropriate medical imaging can lead to the correct diagnosis more readily.     

Multi-machine earliness and tardiness scheduling problem: an interconnected neural network approach

This paper addresses the problem of scheduling a set of independent jobs with sequence-dependent setups and distinct due dates on non-uniform multi-machines to minimize the total weighted earliness and tardiness, and explores the use of artificial neural networks as a valid alternative to the traditional scheduling approaches. The objective is to propose a dynamical gradient neural network, which employs a penalty function approach with time varying coefficients for the solution of the problem which is known to be NP-hard. After the appropriate energy function was constructed, the dynamics are defined by steepest gradient descent on the energy function. The proposed neural network system is composed of two maximum neural networks, three piecewise linear and one log-sigmoid network all of which interact with each other. The motivation for using maximum networks is to reduce the network complexity and to obtain a simplified energy function. To overcome the tradeoff problem encountered in using the penalty function approach, a time varying penalty coefficient methodology is proposed to be used during simulation experiments. Simulation results of the proposed approach on a scheduling problem indicate that the proposed coupled network yields an optimal solution which makes it attractive for applications of larger sized problems.     

Quantum Henry gas solubility optimization algorithm for global optimization

Engineering with Computers - In this article, the lightweight design problems of Timoshenko composite beams with and without considering the uncertainties of input data (i.e., the geometry of beam,...     

The effect of substrate composition on the electrochemical and mechanical properties of PEO coatings on Mg alloys

Plasma electrolytic oxidation (PEO) is a unique surface treatment technology which is based on anodic oxidation forming ceramic oxide coatings on the surface of light alloys such as Mg, Al and Ti. In the present study, PEO coatings prepared on AZ91D, AZ31B, AM60B and AM50B Mg alloys have been investigated. Surface morphology and elemental composition of coatings were determined using scanning electron microscope (SEM) equipped with energy dispersive spectrometer (EDS). SEM results showed that the coating exhibited a porous top surface layer and a subsequent dense layer with micro-pores and shrinkage cracks. Phase analysis of coatings was carried out by X-ray diffraction (XRD). XRD analyses indicated that PEO coatings on AZ alloys had higher amount of Periclase (MgO) followed by the presence of Spinel (MgAl₂O₄) e.g. on the AZ91D alloy compared to that on AM series alloys. In order to examine the effect of substrate composition on adhesion strength of PEO coating scratch tests were carried out. Electrochemical corrosion tests were undertaken by means of potentiodynamic polarization technique in 3.5% NaCl solution at room temperature (20 ± 2 °C). Corrosion test results indicated that the corrosion rates of coated Mg alloys decreased by nearly two orders of magnitude as compared to bare Mg alloys. PEO coatings on AZ series alloys showed better corrosion resistance and higher adhesion properties than AM series alloys. In addition to the PEO processing parameters, such are mainly attributes of the compositional variations of the substrate alloys which are responsible for the formation, phase contents and structural properties of the PEO coatings.     

Enhanced Sulfur Tolerance of Ceria-Promoted NO x Storage Reduction (NSR) Catalysts: Sulfur Uptake, Thermal Regeneration and Reduction with H2(g)

SO _x uptake, thermal regeneration and the reduction of SO _x via H₂(g) over ceria-promoted NSR catalysts were investigated. Sulfur poisoning and desulfation pathways of the complex BaO/Pt/CeO₂/Al₂O₃ NSR system was investigated using a systematic approach where the functional sub-components such as Al₂O₃, CeO₂/Al₂O₃, BaO/Al₂O₃, BaO/CeO₂/Al₂O₃, and BaO/Pt/Al₂O₃ were studied in a comparative fashion. Incorporation of ceria significantly increases the S-uptake of Al₂O₃ and BaO/Al₂O₃ under both moderate and extreme S-poisoning conditions. Under moderate S-poisoning conditions, Pt sites seem to be the critical species for SO _x oxidation and SO _x storage, where BaO/Pt/Al₂O₃ and BaO/Pt/CeO₂/Al₂O₃ catalysts reveal a comparable extent of sulfation. After extreme S-poisoning due to the deactivation of most of the Pt sites, ceria domains are the main SO _x storage sites on the BaO/Pt/CeO₂/Al₂O₃ surface. Thus, under these conditions, BaO/Pt/CeO₂/Al₂O₃ surface stores more sulfur than that of BaO/Pt/Al₂O₃. BaO/Pt/CeO₂/Al₂O₃ reveals a significantly improved thermal regeneration behavior in vacuum with respect to the conventional BaO/Pt/Al₂O₃ catalyst. Ceria promotion remarkably enhances the SO _x reduction with H₂(g).     

The degradation of an azo dye in a batch slurry photocatalytic reactor

The photocatalytic degradation of a commercial azo-reactive textile dye, Remazol Red F-3B, has been investigated in a batch slurry reactor using semiconductor catalysts like, ZnO and TiO₂, and two UV sources emitting mainly at 254 and 365 nm. Non-irradiated catalysts and non-catalyzed UV irradiation have negligible effect on the dye degradation. Initial pH, dye concentration, light power and catalyst loading as well as the catalyst type and UV wavelength are considered as process variables. The results showed that decolorization and TOC removal efficiencies of ZnO are higher under 365 nm UV. On the other hand, when two photocatalysts are compared, the decolorization performance of ZnO is higher than TiO₂ under 365 nm UV_, while TiO₂ performs better under 254 nm UV. Furthermore, from the TOC removal point, TiO₂ performs better than ZnO irrespective of the UV wavelength. TiO₂ irradiated under 254 nm UV degrades successfully both benzene and naphthalene derivatives.     

Adsorption of malachite green onto bentonite: Equilibrium and kinetic studies and process design

The adsorption of malachite green onto bentonite in a batch adsorber has been studied. The effects of contact time, initial pH and initial dye concentration on the malachite green adsorption by the bentonite have been studied. Malachite green removal was seen to increase with increasing contact time until equilibrium and initial dye concentration, and the adsorption capacity of bentonite was independent of initial pH in the range 3–11. Four kinetic models, the pseudo first- and second-order equations, the Elovich equation and the intraparticle diffusion equation, were selected to follow the adsorption process. Kinetic parameters; rate constants, equilibrium adsorption capacities and correlation coefficients, for each kinetic equation were calculated and discussed. It was shown that the adsorption of malachite green onto bentonite could be described by the pseudo second-order equation. The experimental isotherm data were analyzed using the Langmuir, Freundlich, Temkin and Dubinin–Radushkevich equations. Adsorption of malachite green onto bentonite followed the Langmuir isotherm. The thermodynamic parameters, such as ΔH, ΔS and ΔG, were also determined and evaluated. A single stage batch adsorber was designed for different adsorbent mass/treated effluent volume ratios using the Langmuir isotherm.