A microwave method based on amplitude-only reflection measurements for permittivity determination of low-loss materials

A new method based on amplitude-only reflection measurements for complex permittivity determination of low-loss materials backed by a short-circuit termination is presented. There are two main advantages of the proposed method. First, it is insensitive to calibration plane shifts and phase uncertainties in reflection measurements of low-loss materials. Second, it does not require any additional test material with a thickness value different than that of the material under test. The disadvantage of the proposed method is that it is not convenient to apply for complex permittivity determination of dispersive low-loss materials. The method is validated by complex and amplitude-only scattering parameter measurements at X-band of a low-loss sample (polystyrene) fitted into a waveguide section. The method, as other non-resonant methods, can only provide a rough indication of the imaginary part of the permittivity for low-loss samples.     

To Integrate of Not to Integrate?

Turkish architecture over the last 150 years has been plagued by its preoccupation with its integration with the West. Should it be embracing or reflecting Western cultural, technical and professional standards? Uğur Tanyeli provides the background to this pessimistic context and describes how a new generation of architects over the last 10 years have transcended this predicament by producing work that turns away from this obsession with identity. Copyright © 2010 John Wiley & Sons, Ltd.     

Pb(II) biosorption using anaerobically digested sludge

Removal of Pb(II) by using resting cells of anaerobically digested sludge (ADS) obtained from a nearby wastewater treatment plant was examined. Firstly, sorption kinetic and equilibrium experiments were conducted using agitated, thermostated (25 degrees C) batch reactors. The maximum Pb(II) sorption capacity was found to be very high (1,750 mg/g dry ADS or 8.45 mmol/g dry ADS). At all initial Pb(II) concentrations tested, sorption resulted in neutralization with an increase in the solution pH from an initial value of 4.0-5.5 to an equilibrium value of 7.0-8.0, at which Pb(II) can precipitate as hydroxide. The removal of Pb(II) by ADS was found to involve bioprecipitation as well as biosorption. FTIR spectrometry highlighted carboxyl groups present on the surface of ADS as the major functional groups responsible for biosorption. Secondly, a three-stage semi-continuous pseudo-counter current reactor system was tested to reduce ADS requirement in comparison to a conventional single-stage batch reactor. At an initial Pb(II) concentration of about 200 mg/L, an effluent Pb(II) concentration of 1.3 mg/L was achieved in the three stage reactor, corresponding to a metal removal capacity of 682.7 mg/g dry ADS (3.30 mmol/g), in comparison to 1.9 mg/L and 644.0 mg/g dry ADS (3.10 mmol/g) for the single-stage batch reactor.     

Microbiological,chemical and sensory assessment of mussels (<Emphasis Type="Italic">Mytilus galloprovincialis</Emphasis>) stored under modified atmosphere packaging

Wild mussels (Mytilus galloprovincialis), were packaged aerobically under vaccum packaging(VP) and modified atmosphere packaging (MAP (50%/50% CO₂/N₂: M1, 80%/20% CO₂/N₂: M2, 65%/35% CO₂/N₂: M3), and stored at 2 ± 1 °C. Quality evaluation was carried out using microbiological, chemical and sensory analyses. Microbiological results revealed that M2 and M3 delayed microbial growth compared to M1. Of the chemical indices determined, the TVB-N and TMA-N values of M2 remained lower than the proposed acceptability limits of 35 mg N/100 g and 8 mg N/100 g, respectively, up to 8 days of storage. All of the MAP and VP mussel samples exceeded these limits after 12 days of storage. All samples retained desirable sensory characteristics during the first 8 days of storage. Based on microbiological and chemical analyses along with sensory evaluation, M2 and M3 gave a longer shelf-life compared with VP and M1. M2 gas mixture was the most effective for mussel preservation.     

Antioxidative activities of grape (Vitis vinifera) seed extracts obtained from different varieties grown in Turkey

In this study, total phenolic contents and antioxidant activities of grape seed extracts obtained from twelve different grape seeds from common varieties grown in Turkey were determined. Grape seeds were extracted with 70% acetone and extraction yield of grape seed were calculated. The total phenolic content of grape seed extracts were determined by the Folin‐Ciocalteu procedure and ranged from 33 945 to 58 730 mg per 100 g extract as gallic acid equivalent. Antioxidant activities of grape seed extracts with two different free radical scavenging methods, ABTS [2,2/‐azinobis (3‐ethylbenzothiazoneline‐6‐sulfonic acid)] and DPPH (2,2‐diphenyl‐picrylhydrazyl) assays, using Trolox equivalent as standards, were investigated. Grape seed extracts exhibited antioxidant activities 2.46–4.14 and 3.55–5.76 [Trolox equivalent antioxidant capacities (TEAC) mg^?1 extracts] in ABTS and DPPH assays, respectively. Compared with varieties, Muskule extracts exhibited the lowest total phenolic content, TEAC_ABTS and TEAC_DPPH value while Narince extracts had the highest total phenolic content and TEAC_DPPH value, and Alphonse Lavalleé had the highest TEAC_ABTS value. Total phenolic content showed that there is a significant correlation with TEAC_DPPH (r = 0.7974, P ≤ 0.001) and TEAC_ABTS values (r = 0.4860, P ≤ 0.05).     

Detailed analysis on thermal,microstructural, mechanical,and morphological features of side chain liquid crystalline polymer/isotactic polypropylene graft copolymers: Effect of grafted and ungrafted polymer units

The main scope of this comprehensive study is to investigate the effects of poly(p-benzophenoneoxycarbonylphenyl acrylate), poly(BPOCPA), which presenting as only graft units or both graft and ungrafted units in the matrix, on the fundamental features of isotactic polypropylene (IPP). The graft copolymerization of BPOCPA onto IPP was performed with the aid of bulk melt polymerization at varying monomer content levels ranging from 5% to 40%. The thermal behavior, crystal quality, mechanical performance, and surface morphology of the samples were investigated by means of differential scanning calorimeter, X-ray diffractometer (XRD), universal mechanical test, and scanning electron microscope (SEM) techniques. Thermal analyses depicted that there existed the noteworthy enhancements in both crystalline melting temperatures and percent crystallinities of matrix polymers. Furthermore, according to XRD results, a and b parameters increased significantly at low percentages of the graft units, while the parameter c decreased in all products in consistence with the content. As for the mechanical characterization, the grafting led to remarkable improvements in modulus, tensile and impact strength of the products. SEM micrographs indicated that the samples were completely homogeneous without any phase separation and the products exhibited brittle nature with some ductility.     

Trans-differentiation of human adipose-derived mesenchymal stem cells into cardiomyocyte-like cells on decellularized bovine myocardial extracellular matrix-based films

In this study, we aimed at fabricating decellularized bovine myocardial extracellular matrix-based films (dMEbF) for cardiac tissue engineering (CTE). The decellularization process was carried out utilizing four consecutive stages including hypotonic treatment, detergent treatment, enzymatic digestion and decontamination, respectively. In order to fabricate the dMEbF, dBM were digested with pepsin and gelation process was conducted. dMEbF were then crosslinked with N-hydroxysuccinimide/1-Ethyl-3-(3-dimethylaminopropyl)-carbodiimide (NHS/EDC) to increase their durability. Nuclear contents of native BM and decellularized BM (dBM) tissues were determined with DNA content analysis and agarose-gel electrophoresis. Cell viability on dMEbF for 3rd, 7th, and 14th days was assessed by MTT assay. Cell attachment on dMEbF was also studied by scanning electron microscopy. Trans-differentiation capacity of human adipose-derived mesenchymal stem cells (hAMSCs) into cardiomyocyte-like cells on dMEbF were also evaluated by histochemical and immunohistochemical analyses. DNA contents for native and dBM were, respectively, found as 886.11?±?164.85 and 47.66?±?0.09?ng/mg dry weight, indicating a successful decellularization process. The results of glycosaminoglycan and hydroxyproline assay, and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), performed in order to characterize the extracellular matrix (ECM) composition of native and dBM tissue, showed that the BM matrix was not damaged during the proposed method. Lastly, regarding the histological study, dMEbF not only mimics native ECM, but also induces the stem cells into cardiomyocyte-like cells phenotype which brings it the potential of use in CTE.     

The Nucleation Effect of PbSe Additive on Bi2Sr2CaCu2Oδ Glass Ceramics

Glass and Ceramics - The crystallisation kinetics and effects of doping on Bi2Sr2CaCu2Oδ (BSCCO) glass ceramic system with 0.0%, 0.1%, 0.3% and 0.5% PbSe were investigated in this study....