Effect of coffee physical structure on volatile release

The mechanisms of volatile release from soluble coffee powders with different roasting degrees were studied. The presence of volatiles in the headspace during coffee humidification was analyzed by gas chromatography. Small amounts of volatiles were observed at low water activities (a_w), independently from the roasting degree; as the a_w increased headspace volatiles rose and then decreased as the moisture further increased. The changes in a_w and volatiles went along with the changes of coffee structure from a free-flowing powder to a sticky viscous fluid. The mechanism of volatiles release was controlled by both kinetic and thermodynamic factors. The former prevailed at low a_w in glassy systems; while the latter became important at high a_w when, due to increased mobility, equilibrium conditions were approached. Modified state diagrams were used to predict the critical temperature and a_w at which structural collapse and volatile release occurred. As far as equilibrium condition was achieved, coffee volatiles were partially re-adsorbed in the liquid phase.     

Monitoring of perfluorinated compounds in edible fish from the Mediterranean Sea

Perfluorooctanoic acid (PFOA) and perfluorooctane sulphonate (PFOS) are environmental contaminants belonging to a chemical group known as perfluorinated compounds (PCFs). The United States Environmental Protection Agency (US EPA) considers both compounds to be carcinogenic. The goal of the present study was to evaluate the contamination levels of PFOS and PFOA in edible fish of the Mediterranean Sea. Twenty six fish muscles, 17 fish livers, five series of cephalopods (each composed of ten specimens) and thirteen series of bivalves (each composed of about 50 specimens) were used for the investigation. A fast sample treatment, followed by an LC–ESI–MS/MS method is described for the identification, and quantification of PFOA and PFOS in fish. The method was in-house-validated through the determination of precision, accuracy, specificity, calibration curve, decision limit (CCα), and detection capability (CCβ). The results showed PFOA and PFOS levels in fishes and molluscs lower than those reported for analogue matrices in different geographic areas. Therefore, our biomonitoring results did not show that the Mediterranean Sea had any particularly alarming pollution by PFCs, although it is located in a semi-closed basin with scarce water change. Nonetheless, a worrying element is that a few fish showed extremely high contamination by PFOA and PFOS. This finding needs further clarification in order to assess whether such unusual contamination is linked to “dot-like” pollutant release, which could explain the anomaly.     

The cell wall sensor Wsc1p is involved in reorganization of actin cytoskeleton in response to hypo-osmotic shock in Saccharomyces cerevisiae

The cell wall is essential to preserve osmotic integrity of yeast cells. Some phenotypic traits of cell wall mutants suggest that, as a result of a weakening of the cell wall, hypo-osmotic stress-like conditions are created. Consequent expansion of the cell wall and stretching of the plasma membrane trigger a complex response to prevent cell lysis. In this work we examined two conditions that generate a cell wall and membrane stress: one is represented by the cell wall mutant gas1Delta and the other by a hypo-osmotic shock. We examined the actin cytoskeleton and the role of the cell wall sensors Wsc1p and Mid2p in these stress conditions. In the gas1 null mutant cells, which lack a beta(1,3)-glucanosyltransferase activity required for cell wall assembly, a constitutive marked depolarization of actin cytoskeleton was found. In a hypo-osmotic shock wild-type cells showed a transient depolarization of actin cytoskeleton. The percentage of depolarized cells was maximal at 30 min after the shift and then progressively decreased until cells reached a new steady-state condition. The maximal response was proportional to the magnitude of the difference in the external osmolarity before and after the shift within a given range of osmolarities. Loss of Wsc1p specifically delayed the repolarization of the actin cytoskeleton, whereas Wsc1p and Mid2p were essential for the maintenance of cell integrity in gas1Delta cells. The control of actin cytoskeleton is an important element in the context of the compensatory response to cell wall weakening. Wsc1p appears to be an important regulator of the actin network rearrangements in conditions of cell wall expansion and membrane stretching.     

Scratch hardness and deformation maps for polycarbonate and polyethylene

This paper presents results obtained from the scratching of an ultrahigh molecular weight polyethylene (UHMWPE) and a polycarbonate (PC). The data are used to obtain various surface mechanical properties such as the hardness and also the prevailing deformation mechanisms. Scratch results are reported for the case of rigid conical indenters for various tip included angles, bulk temperatures, scratch velocities, and applied normal loads. Scanning electron microscopy (SEM) and laser profilometry data are used to study the surface deformation and damage mechanisms, and to assess the topography of the surfaces after scratching. Deformation maps are provided for these polymers under different experimental conditions, which describe the various deformation characteristics. In general, these polymers show both increasing and decreasing trends for the scratch hardness values with variation of cone angle, (4qW/ηd²; where W is the normal load, d the width of the residual scratch, and q is a characteristic contact parameter, which ranges between 1 and 2). The scratch velocity, which governs the imposed strain rate, imparts an increasing effect on the hardness values, whereas a higher bulk temperature of the material decreases the scratch hardness. The measured responses of the surface properties of these polymers are shown to greatly depend upon the kind of deformation mechanism prevalent during the scratching and associated material removal processes.     

The Role of Testosterone in the Elderly: What Do We Know?

Testosterone is the most important hormone in male health. Aging is characterized by testosterone deficiency due to decreasing testosterone levels associated with low testicular production, genetic factors, adiposity, and illness. Low testosterone levels in men are associated with sexual dysfunction (low sexual desire, erectile dysfunction), reduced skeletal muscle mass and strength, decreased bone mineral density, increased cardiovascular risk and alterations of the glycometabolic profile. Testosterone replacement therapy (TRT) shows several therapeutic effects while maintaining a good safety profile in hypogonadal men. TRT restores normal levels of serum testosterone in men, increasing libido and energy level and producing beneficial effects on bone density, strength and muscle as well as yielding cardioprotective effects. Nevertheless, TRT could be contraindicated in men with untreated prostate cancer, although poor findings are reported in the literature. In addition, different potential side effects, such as polycythemia, cardiac events and obstructive sleep apnea, should be monitored. The aim of our review is to provide an updated background regarding the pros and cons of TRT, evaluating its role and its clinical applicability in different domains.     

Molecular Mechanisms and Physiological Changes behind Benign Tracheal and Subglottic Stenosis in Adults

Laryngotracheal stenosis (LTS) is a complex and heterogeneous disease whose pathogenesis remains unclear. LTS is considered to be the result of aberrant wound-healing process that leads to fibrotic scarring, originating from different aetiology. Although iatrogenic aetiology is the main cause of subglottic or tracheal stenosis, also autoimmune and infectious diseases may be involved in causing LTS. Furthermore, fibrotic obstruction in the anatomic region under the glottis can also be diagnosed without apparent aetiology after a comprehensive workup; in this case, the pathological process is called idiopathic subglottic stenosis (iSGS). So far, the laryngotracheal scar resulting from airway injury due to different diseases was considered as inert tissue requiring surgical removal to restore airway patency. However, this assumption has recently been revised by regarding the tracheal scarring process as a fibroinflammatory event due to immunological alteration, similar to other fibrotic diseases. Recent acquisitions suggest that different factors, such as growth factors, cytokines, altered fibroblast function and genetic susceptibility, can all interact in a complex way leading to aberrant and fibrotic wound healing after an insult that acts as a trigger. However, also physiological derangement due to LTS could play a role in promoting dysregulated response to laryngo-tracheal mucosal injury, through biomechanical stress and mechanotransduction activation. The aim of this narrative review is to present the state-of-the-art knowledge regarding molecular mechanisms, as well as mechanical and physio-pathological features behind LTS.     

Coqoon

International Journal on Software Tools for Technology Transfer - User interfaces for interactive proof assistants have always lagged behind those for mainstream programming languages. Whereas...     

Sol–Gel Synthesis of λ–Na2O·xAl2O3 Films

Na₂O· x Al₂O₃ ( x = 9, 11)films have been obtained by sol–gel method. Crystallization processes during heat treatments have been investigated by X–ray diffraction analysis. A metastable phase with the mullite structure, λ–Na₂O· x Al₂O₃, has been observed starting from 800°C. Films remained stable after a heat treatment at 1000°C for 250 h. Impedance spectroscopy measurements showed that the films of λ-Na₂O· x Al₂O₃ possess a large three–dimensional ionic conductivity at 400°C.     

Ceramic Microtubes from Preceramic Polymers

A novel process for the production of ceramic microtubes involving the microextrusion of preceramic polymers was studied. Microtubes with a wide range of inner and outer diameters and several centimeters long were produced from two silicone resins. A coextrusion approach was also used to extend the forming capability of the technique. The addition of carbon black resulted in electrically conductive silicon oxycarbide (SiOC) ceramic microtubes. SiOC microtubes possessed a high bending strength, ranging from ∼30–1100 MPa.     

Preparation and characterization of poly(vinyl chloride)/polystyrene/poly(ethylene glycol) hollow‐fiber ultrafiltration membranes

Hollow‐fiber ultrafiltration (UF) membranes were prepared from blends of poly(vinyl chloride) (PVC) and polystyrene (PS) with a dry/wet phase inversion method. Poly(ethylene glycol) (PEG) and N,N‐dimethylacetamide were used as the additive and solvent, respectively. The effects of the PEG concentration in the dope solution as an additive on the cross sections and inner and outer surface morphologies, permeability, and separation performance of the hollow fibers were examined. The mean pore size, pore size distribution, and mean roughness of both the inner and outer surfaces of the produced hollow fibers were determined by atomic force microscopy. Also, the mechanical properties of the hollow‐fiber membranes were investigated. UF experiments were conducted with aqueous solutions of poly(vinyl pyrrolidone) (PVP; K‐90, M_w = 360 kDa). From the results, we found that the PVC/PS hollow‐fiber membranes had two layers with a fingerlike structure. These two layers were changed from a wide and long to a thin and short morphology with increasing PEG concentration. A novel and until now undescribed shape of the nodules in the outer surfaces, which was denoted as a sea‐waves shape, was observed. The outer and inner pore sizes both increased with increasing PEG concentration. The water permeation flux of the hollow fibers increased from 104 to 367 L m^?2 h^?1 bar^?1) at higher PEG concentrations. The PVP rejection reached the highest value at a PEG concentration of 4 wt %, whereas at higher values (from 4 to 9 wt %), the rejection decreased. The same trend was found also for the tensile stress at break, Young's modulus, and elongation at break of the hollow fibers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 989‐1004, 2013