On the behavior of microstructures with multiple length scales

The current study aims to provide fundamental insight into the behavior of microstructures containing grain sizes that span multiple length scales. A commercial 5083 Al alloy was selected as the material of interest to facilitate comparison with recently published data. The materials studied here were prepared via the thermal consolidation of powders that were cryomilled for different times (i.e., 0, 2, 4, and 8 hours). Following consolidation, the resultant microstructure was characterized by an equiaxed grain morphology with a size distribution centered around 200∼300 nm. Dispersed among the 200- to 300-nm grains were coarse-grained regions or ligaments with a grain size ranging from 600 nm to 2 μm. The occurrence of coarse-grained regions is rationalized on the basis of recrystallization or subgrain coarsening, whereas the occurrence of equiaxed fine regions is proposed to be a result of continuous grain growth. Two types of microstructures were selected for study, containing coarse-grained volumes of approximately 28 pct and 43 pct that corresponded to an ultimate tensile strength (UTS) of 566 MPa and 535 MPa, and a fracture strain of 3.2 pct and 3.5 pct, respectively. The observed ductility and the relevant toughening mechanisms were discussed in light of the presence of multiple length scales.     

Sensitivity of generation reserve requirements in deregulated power systems

Since demand for power exhibits great variability the amount of firm energy to be purchased to meet real time demand based on forecasts is usually different from the realized demand for that period. The role of generation reserves is to meet the real time fluctuations of power demand. The predictable part of the demand is met through purchases of firm energy. In this paper a model is presented to determine optimal quantities of firm energy and generation reserves to meet random demands. The model is then parameterized introducing a set of factors to perform a sensitivity study. A full factorial experiment is designed to study the impact of five factors on the response variable (i.e., proportion of generation reserves on the total purchased quantity). An example consisting of 640 simulations corresponding to 2⁵ treatment combinations evaluated over 20 randomly generated mean demands is used to identify significant factors on the response variable. Results from the experiment suggest that generation reserve requirements should be adjusted considering changes in significant factors and in the mean demand over the dispatch interval.     

Mechanical properties of iron processed by severe plastic deformation

In the present study, the mechanical properties of Fe processed via severe plastic deformation (equal-channel angular pressing (ECAP)) at room temperature were investigated for the first time. The grain size of annealed Fe, with an initial grain size of about 200 μm, was reduced drastically during ECAP. After eight passes, the grain size reaches 200 to 400 nm, as documented by means of transmission electron microscopy (TEM). The value of microhardness during pressing increases 3 times over that of the starting material after the first pass and increases slightly during subsequent pressing for higher-purity Fe. Examination of the value of microhardness after eight passes as a function of post-ECAP annealing temperature shows a transition from recovery to recrystallization, an observation that resembles the behavior reported for heavily deformed metals and alloys. The tensile and compression behaviors were examined. In tension, a drop in the engineering stress-engineering strain curve beyond maximum load was observed both in the annealed Fe and the ECAP Fe. This drop is related to the neck deformation. The fracture surface, examined by scanning electron microscopy (SEM), shows vein patterns, which is different from the dimples found on the fracture surface of annealed Fe. In compression, an initial strain-hardening region followed by a no-strain-hardening region was observed in the ECAP Fe. The yield strength in tension of the ECAP Fe was observed to be higher than that in compression. The strengthening mechanisms and softening behavior are discussed.     

Innovation assessment in traditional industries. A proposal of aesthetic innovation indicators

Innovative activities are fundamental to the competitiveness strategies of the firms in a globalized market. Their assessment, using indicators such as those utilized in the Community Innovation Survey (CIS), shows significant sectoral dispersion. Traditional industries are in a weak position because the innovation they are involved in is mainly aesthetic, which is not really addressed in innovation surveys. In this work, we review the various criticisms levelled at existing indicators and propose some new indicators that would capture the types of innovations that are conducted by the traditional industries. This work is based on a study of the features of traditional industries and the concept of aesthetic novelty. The proposed indicators are tested in the Spanish footwear industry.     

Defining Phonological Awareness and Its Relationship to Reading Skills in Low-Literacy Adults.

The main purpose of the study reported here was to investigate the relative importance of complexity of syllable structure and task differences in measuring phonological awareness in low-literacy adults. This study is a replication of a study with children conducted by S. A. Stahl and B. A. Murray (1994). Results indicated that the complexity of syllable structure did indeed better describe the construct of phonological awareness in low-literacy adults. At the same time, the authors also found some differences in the pattern of literacy acquisition for their Spanish adults in comparison with child literacy acquisition in English. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Thermal stability in bulk cryomilled ultrafine-grained 5083 Al alloy

Thermal stability in bulk ultrafine-grained (UFG) 5083 Al that was processed by gas atomization followed by cryomilling, consolidation, and extrusion, and that exhibited an average grain size of 305 nm, was investigated in the temperature range of 473 to 673 K (0.55 to 0.79 T _m , where T _m is the melting temperature of the material) for different annealing times. Appreciable grain growth was observed at temperatures > 573 K, whereas there was limited grain growth at temperatures < 573 K even after long annealing times. The values of the grain growth exponent, n, deduced from the grain growth data were higher than the value of 2 predicted from elementary grain growth theories. The discrepancy was attributed to the operation of strong pinning forces on boundaries during the annealing treatment. An examination of the microstructure of the alloy suggests that the origin of the pinning forces is most likely related to the presence of dispersion particles, which are mostly introduced during cryomilling. Two-grain growth regimes were identified: the low-temperature region (<573 K) and the high-temperature region (>573 K). For temperatures lower than 573 K, the activation energy of 25 ± 5 kJ/mol was determined. It is suggested that this low activation energy represents the energy for the reordering of grain boundaries in the UFG material. For temperatures higher than 573 K, an activation energy of 124 ± 5 kJ/mol was measured. This value of activation energy, 124 ± 5 kJ/mol, lies between that for grain boundary diffusion and lattice diffusion in analogous aluminum polycrystalline systems. The results show that the strength and ductility of bulk UFG 5083 Al, as obtained from tensile tests, correlate well with substructural changes introduced in the alloy by the annealing treatment.     

A new pneumatic bearing dynamometer for power input measurement in stirred tanks

A turntable dynamometer has been constructed for the accurate measurement of power input and mixing applications in bench stirred tank reactors. The main feature of this device is a pneumatic bearing with complementary conical parts. The conical pneumatic bearing permitted to apply eccentric loads without affecting its stability. The static friction torque in the pneumatic bearing was very small, 4 × 10^?4 Nm, and can be neglected in the experimental ranges of measured torques, i.e. from 5 × 10^?3 to 2.21 Nm. In accordance with the instrumentation used, the deviations obtained with the apparatus are less than 10% at low torque readings. At moderate torques, deviations lower than 1% are routinely obtained. Several power input measurements show that the obtained data scatter is lower than 2.5%. The power input response in the turbulent regime is in agreement with dimensional analysis: the power input depends on the cube of the impeller speed. In addition, data obtained with a turbine impeller under ungassed conditions agree with the predictions of a published correlation, which takes into account several geometrical parameters.     

Influence of electroosmotic treatment on the hydro-mechanical behaviour of clayey silts: preliminary experimental results

Preliminary results of an investigation focused on the influence of electrokinetic treatment on the mechanical and hydraulic behaviour of clayey soils are presented. The experimental programme aims at providing a contribution to the sustainability of contaminant extraction or containment via electroosmosis. Changes in the hydraulic and mechanical properties of two illitic clayey soils, subjected to a DC electric field, were investigated. Samples of the two soils were subjected to electrokinetic filtration, for different periods of time, and under different constant loads. Afterwards, they were tested under one-dimensional compression to detect changes in stiffness and hydraulic conductivity due to the electrical treatment. After the application of a DC field for a few hours, a small reversible increment in the average soil stiffness was observed, with respect to the untreated soil, while the hydraulic conductivity was not affected substantially. Dramatic changes of the mechanical and hydraulic soil properties, correlated to changes of the soil pH, were observed following non-conditioned electrokinetic treatment with duration of the order of days.     

Improving Neural Networks for Mechanism Kinematic Chain Isomorphism Identification

Detection of isomorphism among kinematic chains is essential in mechanical design, but difficult and computationally expensive. It has been shown that both traditional methods and previously presented neural networks still have a lot to be desired in aspects such as simplifying procedure of identification and adapting automatic computation. Therefore, a new algorithm based on a competitive Hopfield network is developed for automatic computation in the kinematic chain isomorphism problem. The neural approach provides directly interpretable solutions and does not demand tuning of parameters. We have tested the algorithm by solving problems reported in the recent mechanical literature. Simulation results show the effectiveness of the network that rapidly identifies isomorphic kinematic chains.