Mechanical improvement of concrete by irradiated polypropylene fibers

Fiber reinforced concrete (FRC) contains fibers physically mixed with gravel, sand, cement, and water. So far, adequate mechanical performance of FRC has been obtained at high cost and using complex technologies; important here is the geometry and surface characteristics of the polymers. We have modified polymeric‐fiber surfaces by using gamma radiation. Irradiated polypropylene (PP) fibers were submitted to 0, 5, 10, 50, and 100 kGy of gamma irradiation dosages. First, tensile strength of PP fibers was evaluated, and then fibers blended at 0, 1.0, 1.5, and 2.0% in volume with Portland cement, gravel, sand, and water. The highest values of compressive strength were obtained with irradiated‐fibers at 10 kGy and 1.5% in volume of fiber. The result is 101 MPa, as compared to 35 MPa for simple concrete without fibers. POLYM. ENG. SCI., 45:1426–1431, 2005. © 2005 Society of Plastics Engineers     

The transient to steady-state transition during the spray-rolling process

From the geometrical standpoint, this article presents a qualitative theoretical analysis and prediction of the transient to steady-state transition during the spray-rolling process, a novel manufacturing technique for aluminum strips. The analytical results indicate that, when the deposited materials at the specific points on one roll surface overlap their counterparts on the other roll surface, spray rolling transits from the transient state to the steady state. The specific points are the limiting deposition positions of the atomized droplets on the roll surface initially.     

Arthroscopic lysis in knee arthrofibrosis

OBJECTIVE: To compare the efficacy and toxicity of three patient-controlled analgesia (PCA) morphine regimens. DESIGN: A prospective, randomized, pilot study of three PCA morphine regimens: (1) 1 mg with 6-minute lockout (n = 10), (2) 2 mg with 12-minute lockout (n = 12), and (3) 2 mg with 20-minute lockout (n = 12). SETTING: Large teaching institution. PARTICIPANTS: Thirty-four patients undergoing cholecystectomy or hysterectomy. MAIN OUTCOME MEASURES: Pain scores (0 = no pain, 1 = mild pain, 2 = moderate pain, 3 = severe pain), sedation scores, analgesic consumption, and patient attempts (patient activation of PCA device) and injections (doses actually delivered) were evaluated using analysis of covariance. Distribution of pain and sedation scores and adverse effects were assessed using Fisher's exact test. RESULTS: Data on 24 patients were evaluable. Six patients withdrew for poor pain control (2 in group 1, 1 in group 2, and 3 in group 3). Three other patients withdrew because of adverse effects and 1 withdrew because of pump problems. Mean morphine consumption did not differ significantly among the groups. Distribution of pain and sedation scores and the number of patients with nausea were similar across treatment groups. The mean injection to attempt ratio was significantly smaller in group 3 (0.71 +/- 0.11) compared with groups 1 and 2 (0.9 +/- 0.06 and 0.83 +/- 0.09, respectively; p = 0.001). Adverse events occurred similarly among treatment groups. CONCLUSIONS: No significant differences in the efficacy or toxicity of the three morphine PCA regimens were identified.     

VRCTC-310--a novel compound of purified animal toxins separates antitumor efficacy from neurotoxicity

Two purified animal venom toxins, crotoxin and cardiotoxin, have been combined to produce a unique natural product (VRCTC-310) currently under investigation as an antitumor agent by the National Cancer Institute. In vitro, it has demonstrated cytotoxic disease specificity and a unique mechanism of action when submitted to COMPARE analysis. In vivo, tolerance was developed to the neurotoxic properties of crotoxin which allowed comparison of several schedules of fixed and escalating daily i.m. doses to mice bearing s.c. Lewis Lung carcinoma. An 83% inhibition of tumor growth was achieved using an escalating dose schedule starting at 1.8 mg/kg and reaching 6.3 mg/kg/day on day 20. Although some irritation around the sites of i.m. injection was noted, animal weight loss was negligible and there were no other signs of adverse toxicity. This natural product represents a new, membrane interactive anticancer agent which produces a unique spectrum of cytotoxicity in vitro and which has demonstrated interesting in vivo antitumor efficacy.     

On the behavior of microstructures with multiple length scales

The current study aims to provide fundamental insight into the behavior of microstructures containing grain sizes that span multiple length scales. A commercial 5083 Al alloy was selected as the material of interest to facilitate comparison with recently published data. The materials studied here were prepared via the thermal consolidation of powders that were cryomilled for different times (i.e., 0, 2, 4, and 8 hours). Following consolidation, the resultant microstructure was characterized by an equiaxed grain morphology with a size distribution centered around 200∼300 nm. Dispersed among the 200- to 300-nm grains were coarse-grained regions or ligaments with a grain size ranging from 600 nm to 2 μm. The occurrence of coarse-grained regions is rationalized on the basis of recrystallization or subgrain coarsening, whereas the occurrence of equiaxed fine regions is proposed to be a result of continuous grain growth. Two types of microstructures were selected for study, containing coarse-grained volumes of approximately 28 pct and 43 pct that corresponded to an ultimate tensile strength (UTS) of 566 MPa and 535 MPa, and a fracture strain of 3.2 pct and 3.5 pct, respectively. The observed ductility and the relevant toughening mechanisms were discussed in light of the presence of multiple length scales.     

Sensitivity of generation reserve requirements in deregulated power systems

Since demand for power exhibits great variability the amount of firm energy to be purchased to meet real time demand based on forecasts is usually different from the realized demand for that period. The role of generation reserves is to meet the real time fluctuations of power demand. The predictable part of the demand is met through purchases of firm energy. In this paper a model is presented to determine optimal quantities of firm energy and generation reserves to meet random demands. The model is then parameterized introducing a set of factors to perform a sensitivity study. A full factorial experiment is designed to study the impact of five factors on the response variable (i.e., proportion of generation reserves on the total purchased quantity). An example consisting of 640 simulations corresponding to 2⁵ treatment combinations evaluated over 20 randomly generated mean demands is used to identify significant factors on the response variable. Results from the experiment suggest that generation reserve requirements should be adjusted considering changes in significant factors and in the mean demand over the dispatch interval.     

Mechanical properties of iron processed by severe plastic deformation

In the present study, the mechanical properties of Fe processed via severe plastic deformation (equal-channel angular pressing (ECAP)) at room temperature were investigated for the first time. The grain size of annealed Fe, with an initial grain size of about 200 μm, was reduced drastically during ECAP. After eight passes, the grain size reaches 200 to 400 nm, as documented by means of transmission electron microscopy (TEM). The value of microhardness during pressing increases 3 times over that of the starting material after the first pass and increases slightly during subsequent pressing for higher-purity Fe. Examination of the value of microhardness after eight passes as a function of post-ECAP annealing temperature shows a transition from recovery to recrystallization, an observation that resembles the behavior reported for heavily deformed metals and alloys. The tensile and compression behaviors were examined. In tension, a drop in the engineering stress-engineering strain curve beyond maximum load was observed both in the annealed Fe and the ECAP Fe. This drop is related to the neck deformation. The fracture surface, examined by scanning electron microscopy (SEM), shows vein patterns, which is different from the dimples found on the fracture surface of annealed Fe. In compression, an initial strain-hardening region followed by a no-strain-hardening region was observed in the ECAP Fe. The yield strength in tension of the ECAP Fe was observed to be higher than that in compression. The strengthening mechanisms and softening behavior are discussed.     

Innovation assessment in traditional industries. A proposal of aesthetic innovation indicators

Innovative activities are fundamental to the competitiveness strategies of the firms in a globalized market. Their assessment, using indicators such as those utilized in the Community Innovation Survey (CIS), shows significant sectoral dispersion. Traditional industries are in a weak position because the innovation they are involved in is mainly aesthetic, which is not really addressed in innovation surveys. In this work, we review the various criticisms levelled at existing indicators and propose some new indicators that would capture the types of innovations that are conducted by the traditional industries. This work is based on a study of the features of traditional industries and the concept of aesthetic novelty. The proposed indicators are tested in the Spanish footwear industry.     

Defining Phonological Awareness and Its Relationship to Reading Skills in Low-Literacy Adults.

The main purpose of the study reported here was to investigate the relative importance of complexity of syllable structure and task differences in measuring phonological awareness in low-literacy adults. This study is a replication of a study with children conducted by S. A. Stahl and B. A. Murray (1994). Results indicated that the complexity of syllable structure did indeed better describe the construct of phonological awareness in low-literacy adults. At the same time, the authors also found some differences in the pattern of literacy acquisition for their Spanish adults in comparison with child literacy acquisition in English. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Cost-effective smart power CMOS/DMOS technology: design methodology for latch-up immunity

To answer to the need of a cost effective smart power technology, an original design methodology that permits implementing latch-up free smart power circuits on a very simple CMOS/DMOS technology is proposed. The basic concept used to this purpose is letting float the wells of the MOS transistors most susceptible to initiate latch-up. The efficiency of the design methodology is experimentally shown.