Preparation and characterization of a macroporous agarose monolith as a stationary phase in IMAC chromatography

A macroporous monolith used as stationary phase for the separation of biomolecules by immobilized metal ion affinity chromatography (IMAC), based on D5 agarose (D5) chemically modified was proposed. The characterization of physical properties was studied. Pressure drop was <0.4?MPa, being a very low value compared to other similar chromatographic supports. The adsorption/desorption process was carried out using bovine serum albumin (BSA) at pH 7.4 as a target protein. The monolith was re-used for 20 adsorption/desorption cycles and it was possible to verify that the average percentage of adsorption in all cycles was 89.65%. It was also possible to apply a model in order to obtain the kinetic adsorption constant (k_a), desorption constant (k_d) and equilibrium constant (K_e) by the proposed system. These results indicate that this system is governed by the adsorption process.     

Sensory analysis integrated by palynological and physicochemical determinations plays a key role in differentiating unifloral honeys of similar botanical origins (Myrtaceae honeys from southern Spain)

Myrtaceae honeys produced in Sierra Morena (southern Spain, Andalusia) are obtained from both Eucalyptus camaldulensis and Myrtus communis, and honeys can be easily confused when classified as they come from the same botanical family. The characterisation was intended on the basis of their physicochemical, sensory and palynological properties. Cluster analysis (CA) and principal component analysis (PCA) allowed us to make a distinction between two honey profiles. The first one corresponds to the European sensory profile described for Eucalyptus unifloral honeys. The second profile, which sensory characteristics are absolutely different, has not been previously described. Classification of samples is proposed to be based on their pollen type and content and sensory attributes. Therefore, pollen type and content in E. camaldulensis and M. communis are required to distinguish Eucalyptus honey type from other honeys coming from Myrtaceae family. Sensory analysis identifies honey botanical source as well as palynological analysis: Eucalyptus sensory profile requires over 50% of E. camaldulensis and under 30% of M. communis pollen. Previously undefined sensory profile of myrtle honey is showed under 50% of E. camaldulensis and over 30% of M. communis pollen.     

A Stretchable and Flexible Cardiac Tissue–Electronics Hybrid Enabling Multiple Drug Release,Sensing, and Stimulation

Replacement of the damaged scar tissue created by a myocardial infarction is the goal of cardiac tissue engineering. However, once the implanted tissue is in place, monitoring its function is difficult and involves indirect methods, while intervention necessarily requires an invasive procedure and available medical attention. To overcome this, methods of integrating electronic components into engineered tissues have been recently presented. These allow for remote monitoring of tissue function as well as intervention through stimulation and controlled drug release. Here, an improved hybrid microelectronic tissue construct capable of withstanding the dynamic environment of the beating heart without compromising electronic or mechanical functionality is reported. While the reported system is enabled to sense the function of the engineered tissue and provide stimulation for pacing, an electroactive polymer on the electronics enables it to release multiple drugs in parallel. It is envisioned that the integration of microelectronic devices into engineered tissues will provide a better way to monitor patient health from afar, as well as provide facile, more exact methods to control the healing process.     

Ferroelectric Exchange Bias Affects Interfacial Electronic States

In polar oxide interfaces phenomena such as superconductivity, magnetism, 1D conductivity, and quantum Hall states can emerge at the polar discontinuity. Combining controllable ferroelectricity at such interfaces can affect the superconducting properties and sheds light on the mutual effects between the polar oxide and the ferroelectric oxide. Here, the interface between the polar oxide LaAlO₃ and the ferroelectric Ca-doped SrTiO₃ is studied by means of electrical transport combined with local imaging of the current flow with the use of scanning a superconducting quantum interference device (SQUID). Anomalous behavior of the interface resistivity is observed at low temperatures. The scanning SQUID maps of the current flow suggest that this behavior originates from an intrinsic bias induced by the polar LaAlO₃ layer. Such intrinsic bias combined with ferroelectricity can constrain the possible structural domain tiling near the interface. The use of this intrinsic bias is recommended as a method of controlling and tuning the initial state of ferroelectric materials by the design of the polar structure. The hysteretic dependence of the normal and the superconducting state properties on gate voltage can be utilized in multifaceted controllable memory devices.     

Loss and formation of malodorous volatile sulfhydryl compounds during wine storage

Volatile sulfur compounds (VSCs), particularly low molecular weight sulfhydryls like hydrogen sulfide (H₂S) and methanethiol (MeSH), are often observed in wines with sulfurous off-aromas. Recent work has shown both H₂S and MeSH can increase up to a few µM (> 40 µg/L) during anoxic storage, but the identity of the latent sources of these sulfhydryls is still disputed. This review critically evaluates the latent precursors and pathways likely to be responsible for the loss and formation of these sulfhydryls during wine storage based on the existing enology literature as well as studies from food chemistry, geochemistry, biochemistry, and synthetic chemistry. We propose that three precursor classes have sufficient concentration and metastability to serve as latent sulfhydryl precursors in wine: 1) transition metal-sulfhydryl complexes, particularly those formed following Cu(II) addition, which are released under anoxic conditions through an unknown mechanism; 2) asymmetric disulfides, polysulfanes, and (di)organopolysulfanes formed through transition-metal mediated oxidation (e.g., Cu(II)) of sulfhydryls or pesticide degradation, and released through sulfitolysis, metal-catalyzed thiol-disulfide exchange or related reactions; 3) S-alkylthioacetates, primarily formed during fermentation, and releasable hydrolytically. Some evidence also exists for S-amino acids serving as precursors. Based on these findings, we propose a “decision tree” approach to choosing appropriate strategies for managing wines with sulfurous off-aromas.     

Electrical conductivity of poly(2-ethynylthiophene) and poly(2-ethynylfuran) doped with electron acceptors

The electrical conductivity of poly(2-ethynylthiophene) (P2ET) and poly(2-ethynylfuran) (P2EF) doped with electron acceptors such as iodine, bromine, and ferric chloride was investigated. The maximum electrical conductivities of P2ET and P2EF doped with iodine were 3 × 10^?4 Ω^?1 cm^?1 and 5 × 10^?3 Ω^?1 cm^?1, respectively. The electrical conductivity was nearly independent with increasing molecular weight. The spectral measurements such as UV-visible, infrared, electron paramagnetic resonance, thermogravimetric analysis, and X-ray diffraction were also carried out.     

Exploiting the control power of SDN during the transition from IP to SDN networks

The emerging software‐defined networking (SDN) paradigm introduces new opportunities to improve network performance due to the flexibility and programmability provided by a logically centralized element named controller. However, a rapid adoption of the full SDN architecture is difficult in the short term due to economic and technical reasons. This paper faces the SDN nodes replacement problem during the transition from traditional IP networks to fully deployed SDN networks. Six different replacement methods are proposed to select the most appropriate set of traditional IP nodes to be upgraded to SDN‐enabled switches at a particular transition stage. To show the effectiveness of the proposed methods, they have been applied on an optimization problem currently studied by the research community: the power consumption problem. An integer linear programming formulation is presented to solve it and a genetic algorithm is evaluated through simulations on realistic network topologies. Results highlight that energy‐efficiency in hybrid IP/SDN networks can be significantly improved by only replacing a reduced number of IP nodes.     

Utilization of Trenchless Construction Methods by Canadian Municipalities

Trenchless technology is an emerging area of construction involving innovative methods, materials, and equipment used for the installation of new and the rehabilitation or replacement of existing underground infrastructure with minimal or no need for open cut excavation. This technology provides an alternative to traditional methods of open trenching construction, which is often associated with major disruptions to surface activities. The results of a survey of trenchless construction methods in Canada are presented in this paper. The survey, which was sent to 87 municipalities across Canada, provides an indication of current and future trends in the application of trenchless construction technologies in the municipal arena including type and frequency of technologies employed, percentage of projects that employed trenchless technologies, and contractor selection methods. The survey results indicate that trenchless technology is gaining increasing popularity among municipal engineers across Canada. The percentage of all municipal projects utilizing trenchless construction methods has grown over the past 5 years by 180% (new construction) and 270% (rehabilitation). The survey also revealed that the typical Canadian municipality spends $29.68∕capita on new construction of municipal service lines and $18.21∕capita on rehabilitation of existing lines.     

极限量规设计中的公差原则适用问题

在极限量规设计中应遵循两个原则,一是泰勒原则,二是内缩原则。由于设计时未考虑公差原则的影响,如果用相同方法设计出来的极限量规来检测遵循不同公差原则的孔和轴,就可能发生误判报废现象。例如图１所示三种不同标注方式的轴,在不考虑公差原则时设计出来的极限量规是相同的,用于检测图１ｂ、ｃ所示轴时就会出现误判报废。图１　三种不同标注方式的轴在图１ａ中,尺寸公差和形位公差之间遵循包容原则。包容原则是使实际要素（单一的或关联的）处处不得超越由其最大实体尺寸确定的理想形状的包容面,同时使其局部实际尺寸不得超越其最…     

Comparison of models to identify lame cows based on gait and lesion scores, and limb movement variables

Bovine lameness results in pain and suffering in cattle and economic loss for producers. A system for automatically detecting lame cows was developed recently that measures vertical force components attributable to individual limbs. These measurements can be used to calculate a number of limb movement variables. The objective of this investigation was to explore whether gait scores, lesion scores, or combined gait and lesion scores were more effectively captured by a set of 5 limb movement variables. A set of 700 hind limb examinations was used to create gait-based, lesion-based, and combined (gait- and lesion-based) models. Logistic regression models were constructed using 1, 2, or 3 d of measurements. Resulting models were tested on cows not used in modeling. The accuracy of lesion-score models was superior to that of gait-score models; lesion-based models generated greater values of areas under the receiving operating characteristic curves (range 0.75 to 0.84) and lower mean-squared errors (0.13 to 0.16) compared with corresponding values for the gait-based models (0.63 to 0.73 and 0.26 to 0.31 for receiving operating characteristic and mean-squared errors, respectively). These results indicate that further model development and investigation could generate automated and objective methods of lameness detection in dairy cattle.