Preliminary irradiation test results from the Yankee Atomic Electric Company reactor vessel test irradiation program

The Yankee Atomic Electric Company test irradiation program was implemented to characterize the irradiation response of representative Yankee Rowe reactor vessel beltline plate materials and to remove uncertainties in the analysis of existing irradiation data on the Yankee Rowe reactor vessel steel. Plate materials each containing 0·24 w/o copper, but different nickel contents at 0·63 w/o and 0·19 w/o, were heat treated to simulate the Yankee vessel heat treatment (austenitized at 982°C (1800°F)) and to simulate Regulatory Guide 1·99 database materials (austenitized at 871°C (1600°F)). These heat treatments produced different microstructures so the effect of microstructure on irradiation damage sensitivity could be tested. Because the nickel content of the test plates varied and the copper level was constant, the effect of nickel on irradiation embrittlement was also tested. Correlation monitor material, HSST-02, was included in the program to benchmark the Ford Nuclear Reactor (University of Michigan Test Reactor) which had never been used before for this type of irradiation program. Materials taken from plate surface locations (versus 1/4T) were included to test whether or not the improved toughness properties of the plate surface layer, resulting from the rapid quench, are maintained after irradiation. If the improved properties are maintained, pressurized thermal shock calculations could utilize this margin. Finally, for one experiment, irradiations were conducted at two irradiation temperatures (260°C and 288°C) to determine the effect of irradiation temperature on embrittlement. The preliminary results of the irradiation program show an average temperature effect of 38°C for a 28°C difference in irradiation temperature. The results suggest that for nickel bearing steels, the superior toughness of plate surface material is maintained after irradiation and for the copper content tested, nickel has little effect on irradiation response. No apparent microstructure effect on irradiation response was noted and the HSST-02 material's response to irradiation was similar to results from power reactor and other test reactor tests, thus qualifying the Ford Test Reactor for irradiation experiments such as those conducted for the Yankee Atomic program.     

Pulsatile ocular blood flow variations with axial length and refractive error

Benign symmetric lipomatosis (BSL), also known as Madelung's disease, is a rare condition and characterized by diffuse but painless growth of unencapsulated lipomas. A close correlation to alcohol and nicotine abuse, metabolic disturbances and malignant tumours have been observed. Surgical treatment is frequently followed by recurrence, nevertheless, it can yield satisfactory functional and cosmetic results. A case of BSL with uncommonly distributed tumors is reported.     

Self-awareness and other-awareness. II: Mirror self-recognition, social contingency awareness, and synchronic imitation.

Eighteen-month-old children were tested for mirror self-recognition using the classic rouge test or an alternative procedure, for social contingency awareness by being closely imitated for a long time, and for the capacity for communication by synchronic imitation. The classic mirror rouge test was shown to produce false negatives. Most recognizers and nonrecognizers became aware of being imitated and imitated the activity of a model, but only recognizers engaged in sustained synchronic imitation of the model. The results support our hypothesis that self-recognition and spontaneous perspective-taking develop in close synchrony because both require a capacity for secondary representation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

CLATHRATE HYDRATE FORMATION ENHANCES NEAR-CRITICAL AND SUPERCRITICAL SOLVENT EXTRACTION EQUILIBRIA

Pre-concentration of dilute aqueous solutions by hydrate formation can improve the effective distribution coefficient and selectivity of solvent extraction. Many solvents can serve simultaneously to promote solution concentration by hydrate formation and also to extract non-polar solutes from the resulting concentrated solution. This concept is illustrated for systems with supercritical ethylene and with near-critical liquid carbon dioxide, and its application to conventional solvents is discussed.     

15 years of processing and dissemination of SPOT-VEGETATION products

Throughout the VEGETATION programme, the Flemish Institute for Technological Research (VITO) uninterruptedly hosted the prime user segment of both VEGETATION 1 and VEGETATION 2 multispectral instruments on board the Satellite Pour l’Observation de la Terre 4 (SPOT 4) and SPOT 5 satellites. Operational since the launch of SPOT 4 in March 1998, and foreseen to continue at least until the end of the SPOT 5 mission (anticipated in spring 2014), this user segment comprises a processing facility (PF), actively receiving, processing, correcting, archiving, and distributing the VEGETATION data and derived added-value products. First and foremost, the VEGETATION programme has been serving the needs of operational users – both institutional and commercial – requesting data in near-real time. However, scientific and educational users too benefited significantly, in particular from VEGETATION’s unique time series of the Earth’s land cover, and more specifically the vegetation cover. Over the years, the centralized archive houses processed data covering the equivalent of 11,000 times the Earth’s surface, and delivered more than 50 terapixels to around 10.000 users. As such, VEGETATION’s mission is a prime example of what Europe wants to achieve through the Global Monitoring for Environment and Security (GMES) initiative: truly operational services providing reliable and up-to-date information.

This article describes the processing facility, the way the data and products are archived, the different dissemination channels as well as the data policy adopted and the users served. One of the recent evolutions, the development of an entirely new product distribution facility (PDF), implemented as part of the Project for On-Board Autonomy – Vegetation (PROBA-V) user segment is discussed.     

Heavy-fuel flame radiation in gas turbine combustors—exploratory results

With lower costs and greater availability, heavy fuel oil appears as an attractive alternative to the conventional gas oil used in industrial gas turbines. However, higher levels of radiation and smoke are expected, and this note reports on some preliminary tests made with a combustion chamber burning fuels of different carbon content, ranging from kerosine to a 25% blend of residual fuel oil in gas oil, at a chamber pressure of 10 atm^*. The combustion rig was equipped with a total-radiation pyrometer and black-body furnace capable of measurement at different axial stations along the spray-stabilized flame. The presence of the residual fuel oil in the gas oil was found to promote significant increases in the mean levels of radiation, emissivity and smoke density, with a modest increase in liner temperature.     

Microstructure and its relationship to deformation processes in amorphous polymer glasses

The microdeformation morphology of a number of vinyl polymers with bulky side chains (type I) and arylene polymers with flexible oxygen linkages (type II) was studied by electron microscopy. The polyarylenes crazed only near the glass transition while the polyvinyls exhibited a crazing regime that extended to liquid nitrogen temperatures. In addition significantly less plastic strain was localized in type II glass crazes relative to those in type I glasses. In compatible blends of polystyrene (PS) and 2,6-dimethyl poly(phenylene oxide) (2MPPO), ca. 30% 2MPPO was sufficient to induce a transition from type I to type II crazing behavior. Small amounts of PS suppressed the low-temperature 2MPPO β relaxation but enhanced the intermediate transition of 2MPPO at higher temperatures. Blending increased the conformational energy of the 2MPPO chain and improved interchain packing. The propensity for the polymer glass to form sharp shear bands at the expense of diffuse bands was increased by a decrease in the conformation energy of the polymer chain and an improvement in the glassy state packing.     

Intrinsic reactivity of gold nanoparticles: Classical, semi-empirical and DFT studies

Gold nanoparticles used in most experiments (1–10 nm) in gold catalysis show varying degrees of reactivity, with particles below 5 nm generally being more reactive. The origin of this activity is a subject of a number of model experiments and theoretical studies on either clusters of a few atoms in size or extended surfaces (smooth or stepped). In the work described here, a classical theory for the variation of the metal workfunction with cluster size, Extended Hückel Theory (EHT) calculations combined with DFT calculations, as well as a carbon monoxide (CO) chemisorption model are combined to develop a relationship between metal particle size and the particle's reactivity towards CO. For gold, it is shown that while the contribution of the d-band hybridization energy to the total CO chemisorption energy is unfavourable for bulk gold, this is not true for gold particles below 5–6 nm. That is, the d-band hybridization energy is negative for small gold particles. This is believed to be explanation of the onset of high reactivity for small gold particles.     

A high temperature apparatus for measurement of the Seebeck coefficient

A high temperature Seebeck coefficient measurement apparatus with various features to minimize typical sources of error is designed and built. Common sources of temperature and voltage measurement error are described and principles to overcome these are proposed. With these guiding principles, a high temperature Seebeck measurement apparatus with a uniaxial 4-point contact geometry is designed to operate from room temperature to over 1200 K. This instrument design is simple to operate, and suitable for bulk samples with a broad range of physical types and shapes.     

Wetland change mapping for the U.S. mid-Atlantic region using an outlier detection technique

Although the impacts of wetland loss are often felt at regional scales, effective planning and management require a comparative assessment of local needs, costs, and benefits. Satellite remote sensing can provide spatially explicit, synoptic land cover change information to support such an assessment. However, a common challenge in conventional remote sensing change detection is the difficulty of obtaining phenologically and radiometrically comparable data from the start and end of the time period of interest. An alternative approach is to use a prior land cover classification as a surrogate for historic satellite data and to examine the self-consistency of class spectral reflectances in recent imagery. We produced a 30-meter resolution wetland change probability map for the U.S. mid-Atlantic region by applying an outlier detection technique to a base classification provided by the National Wetlands Inventory (NWI). Outlier-resistant measures – the median and median absolute deviation – were used to represent spectral reflectance characteristics of wetland class populations, and formed the basis for the calculation of a pixel change likelihood index. The individual scene index values were merged into a consistent region-wide map and converted to pixel change probability using a logistic regression calibrated through interpretation of historic and recent aerial photography. The accuracy of a regional change/no-change map produced from the change probabilities was estimated at 89.6%, with a Kappa of 0.779. The change probabilities identify areas for closer inspection of change cause, impact, and mitigation potential. With additional work to resolve confusion resulting from natural spatial heterogeneity and variations in land use, automated updating of NWI maps and estimates of areal rates of wetland change may be possible. We also discuss extensions of the technique to address specific applications such as monitoring marsh degradation due to sea level rise and mapping of invasive species.