Electrophoretic deposition of carbon nanotubes onto carbon-fiber fabric for production of carbon/epoxy composites with improved mechanical properties

Carbon nanotubes (CNTs) have been deposited onto carbon-fiber fabric using electrophoretic deposition (EPD) prior to the infusion of epoxy resin for the production of carbon/epoxy composites. The carbon-fiber fabric employed for EPD was used in the as-received condition, in which the proprietary epoxy sizing-agent was present. CNTs were functionalized prior to EPD using ozone treatment for oxidation, followed by chemical reaction with polyethyleneimine. The CNT oxidation used a novel recirculating system which enabled ozonolysis to be conducted on large-volume solutions of CNTs in the presence of high-powered sonication, facilitating preparation of stable dispersions suitable for EPD. Significant increases in the shear strength and fracture toughness of the carbon/epoxy composites with the CNT treatment have been measured relative to composites without the CNT treatment. Analysis of fracture surfaces revealed interlaminar regions with high levels of CNTs and evidence of good adhesion between the carbon nanotubes and sized carbon-fiber, which is believed to have contributed to the measured improvement in mechanical properties.     

In Vivo Delivery and Activation of Masked Fluorogenic Hydrolase Substrates by Endogenous Hydrolases in C. elegans

Protein expression and localization are often studied in vivo by tagging molecules with green fluorescent protein (GFP), yet subtle changes in protein levels are not easily detected. To develop a sensitive in vivo method to amplify fluorescence signals and allow cell‐specific quantification of protein abundance changes, we sought to apply an enzyme‐activated cellular fluorescence system in vivo by delivering ester‐masked fluorophores to Caenorhabditis elegans neurons expressing porcine liver esterase (PLE). To aid uptake into sensory neuron membranes, we synthesized two novel fluorogenic hydrolase substrates with long hydrocarbon tails. Recombinant PLE activated these fluorophores in vitro. In vivo activation occurred in sensory neurons, along with potent activation in intestinal lysosomes quantifiable by imaging and microplate and partially attributable to gut esterase 1 (GES‐1) activity. These data demonstrate the promise of biorthogonal hydrolases and their fluorogenic substrates as in vivo neuronal imaging tools and for characterizing endogenous C. elegans hydrolase substrate specificities.     

Development of a Bio-Inspired Dual Catalytic System for Alkane Dehydrogenation

The alkene is a central functional group in organic synthesis. While myriad reliable methods exist to access this moiety from other functionalities, acceptorless dehydrogenation, or the direct synthesis of alkenes from alkanes with hydrogen gas as the sole byproduct, remains a challenging, albeit highly desirable, transformation. This essay provides an account of our recent efforts toward accessing this difficult reaction class, with particular attention paid to the diverse precedents that informed our explorations. This report highlights the benefits of maintaining a broad range of interests, and we hope that it illustrates the vast connectivity between chemical disciplines.     

Observation of changing crystal orientations during grain coarsening

Understanding the underlying mechanisms of grain coarsening is important in controlling the properties of metals, which strongly depend on the microstructure that forms during the production process or during use at high temperature. Grain coarsening of austenite at 1273 K in a binary Fe-2 wt.% Mn alloy was studied using synchrotron radiation. Evolution of the volume, average crystallographic orientation and mosaicity of more than 2000 individual austenite grains was tracked during annealing. It was found that an approximately linear relationship exists between grain size and mosaicity, which means that orientation gradients are present in the grains. The orientation gradients remain constant during coarsening and consequently the character of grain boundaries changes during coarsening, affecting the coarsening rate. Furthermore, changes in the average orientation of grains during coarsening were observed. The changes could be understood by taking the observed orientation gradients and anisotropic movement of grain boundaries into account. Five basic modes of grain coarsening were deduced from the measurements, which include: anisotropic (I) and isotropic (II) growth (or shrinkage); movement of grain boundaries resulting in no change in volume but a change in shape (III); movement of grain boundaries resulting in no change in volume and mosaicity, but a change in crystallographic orientation (IV); no movement of grain boundaries (V).     

Mechanisms and Kinetics of Liquid Silicon Oxidation During Industrial Refining

During oxidative ladle refining (OLR) of silicon, the metal surface is partly oxidized, resulting in the formation of a condensed silica fume (SiO₂). This fugitive emission of silica represents a potential health hazard to the workers in the silicon and ferrosilicon industry. In the current work, industrial measurement campaigns aimed at recording the fume generation during OLR were performed at the Elkem Salten plant in Norway. The measured amounts of silica produced were 2.5–5.1?kg/h, depending on the gas flow rate in the refining process. The rate of silica production correlates with the total flow rate and amount of air in the purge gas, and increases as the flow rate increases. The results of this work suggest that fume generation during OLR primarily results from oxidation of the exposed metal surface, with oxygen transport from the surrounding atmosphere to the metal surface being the limiting factor. Other identified mechanisms of SiO₂ formation were splashing of the metal and/or oxidation of SiO gas carried with the refining purge gas.     

Active Oxidation of Liquid Silicon: Experimental Investigation of Kinetics

Small scale laboratory experiments on the oxidation of liquid silicon have reproduced important features of the industrial refining of liquid silicon: active oxidation led to the formation of amorphous silica spheres as a reaction product. The boundary condition for active oxidation in terms of maximum oxygen partial pressure in the bulk gas was found to lie between 2·10^?3 and 5·10^?3?atm at T?=?1,500?°C. The active oxidation of liquid silicon had linear kinetics, and the rate was proportional to bulk oxygen partial pressure and the square root of the linear gas flow rate, consistent with viscous flow mass transfer theory. Classical theory for unconstrained flow over a flat plate led to mass transfer rates for SiO_(g) which were 2–3 times slower than observed. However, computational fluid dynamic modeling to take into account the effects of reactor tube walls on flow patterns yielded satisfactory agreement with measured volatilization rates.     

Effect of the Current Density on Morphology,Porosity, and Tribological Properties of Electrodeposited Nickel on Copper

In the steel industry, nickel coating on copper has increased the lifespan of continuous ingot casting molds. The objective of this work is to estimate the porosity of nanocrystalline nickel electrodeposited onto copper. Characteristics of nickel coating such as hardness, wear resistance, porosity, morphology, and adhesion are very important for maximum performance of molds. The effective porosity in nickel coating was determined by using anodic voltammetry. The porosity of electrodeposited nickel onto copper increased from 0.16% up to 6.22% as the current density increased from 1.5 up to 8.0 A dm⁻². The morphology of the nickel electrodeposited at lower current densities was more compact. Tribological properties were studied using hardness measurements, and calotest. Results of calotest indicated a wear coefficient of 10⁻⁶ for all samples. An extremely low friction coefficient of 0.06-0.08 was obtained for the sample deposited with a current density of 1.5 A dm⁻², and a friction coefficient of 0.15-0.21 was measured for the nickel coating electrodeposited at a current density of 5 A dm⁻². Effects of the current density of the electrodeposition process on the morphology, porosity, and tribological properties were evaluated.     

AlMnFeSi合金退火过程中的微观组织及力学性能的演变

通过2种不同的均匀化热处理及随后的冷轧,使一种3xxx系模型合金获得不同尺寸和分布的弥散析出相,并使铝基体含有不同含量的Mn。系统研究不同均匀化热处理组织和冷轧变形量对退火过程中模型合金的回复与再结晶行为的影响。根据实验结果,绘制出弥散析出相和再结晶过程的相互作用时间-温度-转变曲线（TTT）。TTT曲线显示固溶体中Mn的含量和弥散析出相的颗粒密度对软化行为有强烈的影响。在再结晶退火过程中或再结晶退火之前析出的高密度、细小、弥散析出相显著阻碍软化过程,并形成粗大的再结晶组织。在没有细小、稠密的弥散相影响下的再结晶退火,可以获得均匀、细小的等轴晶。而且,弥散析出相对再结晶过程的阻碍作用取决于再结晶过程的持续时间和弥散析出相的数量。在持续时间长的再结晶过程中,细小、稠密的弥散相对再结晶有着强烈的影响,而在其他情况下影响则有限。不管再结晶过程中是否受到弥散相析出的影响,在再结晶退火之前已经存在于组织中的细小、稠密的弥散相（平均尺寸0.1μm）也会导致再结晶退火之后形成粗大的再结晶组织。     

Phase Analysis and Thermal Stability of Hot Isostatically Pressed Zirconia–Hydroxyapatite Composites

Composites of zirconia and hydroxyapatite (OHAp) have been processed via hot isostatic pressing (HIP) or sintering in air. When the composites were sintered in air at a temperature of 950°C, decomposition of the OHAp to tricalcium phosphate occurred. Using the HIP technique, composites without any detectable degradation of the OHAp phase were produced at 1200°C. The reactivity between zirconia and OHAp was dependent on both the amount of water lost from OHAp and the geometry of the interaction. The phase composition of the materials prepared was evaluated from their powder X-ray diffraction patterns, and their microstructures were studied via electron microscopy.