Karyotype description of Pomacea patula catemacensis (Caenogastropoda, Ampullariidae), with an assessment of the taxonomic status of Pomacea patula.

Mitotic chromosomes of the freshwater snail Pomacea patula catemacensis (Baker 1922) were analyzed on gill tissue of specimens from the type locality (Lake Catemaco, Mexico). The diploid number of chromosomes is 2n = 26, including nine metacentric and four submetacentric pairs; therefore, the fundamental number is FN = 52, No sex chromosomes could be identified. The same chromosome number and morphology were already reported for P. flagellata, i.e., the other species of the genus living in Mexico. The basic haploid number for family Ampullariidae was reported to be n = 14 in the literature; so, its reduction to n = 13 is probably an apomorphy of the Mexican Pomacea snails. Lanistes bolteni, from Egypt, also shows n = 13, but its karyotype is much more asymmetrical, and seems to have evolved independently from P. flagellata and P. patula catemacensis. The nominotypical subspecies, P. patula patula (Reeve 1856), is a poorly known taxon, whose original locality is unknown. A taxonomical account is presented here, and a Mexican origin postulated as the most parsimonious hypothesis.     

Al surface morphology effect on flip-chip solder bump shear strength

This paper reports the result of a study on the effect of aluminum pad surface morphology on the flip-chip solder bump reliability. The influence of the Al surface morphology on the electroless zinc/nickel/gold UBM is presented. The reliability of the solder bump as measured by ball shear force is reported. Al pad were produced using two RF sputtering systems: CVC-601 and Varian-3180. The Al targets used in CVC and Varian system were 99%Al–1%Si and 98.95%Al–1%Si–0.05%Ti respectively. The surface of the CVC sputtered Al samples were smooth while the surface of the Varian sputtered Al samples were rough. All the samples were subjected to the electroless zinc/nickel/gold plating. The results suggest that after plating, the smooth Al surface resulted in a fine nickel UBM surface while the rough Al surface formed a coarse nickel UBM surface. Ball shear test was conducted after the solder balls were bumped on the UBM. Result shows that the fine UBM surface samples have twice the shear strength compared to the samples with coarse UBM surface samples. The analysis of the results indicates that shear surface occurred at the UBM and the solder interface for samples with rough UBM surface leading to the lower shear strength. Nickel bump shear test result shows that pretreatment of Al pad surface by sodium hydroxide and nitric acid created more zinc seeds this led to better electroless nickel plating. Nickel bump shear tests also shows that double zincated bumps had higher shear strength than single zincated bumps. To obtain reliable flip-chip solder bumps, it is essential to maintain good Al pad surface morphology, pretreatment of the Al pad and undergo second zincation.     

Incorporation of citrus fibers in fermented milk containing probiotic bacteria

The incorporation of Lactobacillus acidophilus CECT 903, Lactobacillus casei CECT 475 and Bifidobacterium bifidum CECT 870 together with lemon (LF) and orange (OF) fibers obtained from juice by-products were tested in (i) a model system: fiber enriched with de Man Rogosa Sharp (MRS) broth cultured with each probiotic bacteria and (ii) evaluation of populations of probiotic bacteria in fermented milks formulated with citrus fibers. Citrus fibers enhanced L. acidophilus CECT 903, and L. casei CECT 475 survival in MRS during refrigerated storage, whereas erratic results were obtained for B. bifidum CECT 870, OF enhanced its growth and LF had inhibitory effect. Populations of probiotic bacteria decreased with storage time in MRS broth. The presence of yogurt starter bacteria in probiotic fermented milks favored the growth and survival of L. acidophilus and B. bifidum. Citrus fiber presence in fermented milks also enhanced bacterial growth and survival of the tested probiotic bacteria. This study indicates that citrus fiber enriched fermented milk have good acceptability and are good vehicles for a variety of commercial probiotics but survival of B. bifidum will need to be improved.     

Prevalence, distribution, and diversity of Listeria monocytogenes in retail environments, focusing on small establishments and establishments with a history of failed inspections

Despite growing concerns about cross-contamination of ready-to-eat foods with Listeria monocytogenes, our knowledge about the ecology and transmission of L. monocytogenes in retail establishments has remained limited. We conducted a cross-sectional study to characterize the prevalence, distribution, and subtype diversity of L. monocytogenes in 120 New York State retail deli establishments that were hypothesized to present an increased risk for environmental L. monocytogenes contamination (i.e., small establishments and establishments with a history of failed New York State Agriculture and Markets inspections). Analysis of these data along with previously reported data for 121 predominantly larger retail establishments in New York State identified establishment size, geographic location, and inspection history as significant predictors of L. monocytogenes presence and prevalence. The odds of an establishment being L. monocytogenes positive were approximately twice as high for large establishments, establishments located in New York City, or establishments with poor inspection history (as compared with establishments without these attributes), even though correlation between location and inspection history complicated interpretation of results. Within an establishment, L. monocytogenes was significantly more prevalent on nonfood contact surfaces than on food contact surfaces; prevalence was particularly high for floors and in floor drains, sinks, the dairy case, and milk crates. L. monocytogenes subtype diversity differed between sites, with lineage I isolates significantly associated with nonfood contact surfaces and lineage II isolates significantly associated with food contact surfaces. Isolates belonging to the same ribotype were often found dispersed across multiple sites within an operation.     

Survival of biogenic amine‐producing dairy LAB strains at pasteurisation conditions

Biogenic amines (BAs) are low molecular weight organic bases with biological activity, synthesised by the microbial decarboxylation of precursor amino acids such as histidine, tyrosine or arginine. The consumption of food and beverages containing large amounts of BA can have toxicological effects. This paper reports the resistance of aminogenic lactic acid bacteria strains to pasteurisation (63 °C for 30 min). Skimmed milk inoculated with histamine‐ and tyramine‐producing strains of Enterococcus and Lactobacillus was subjected to pasteurisation. The viable number of Enterococcus durans IPLA 655 was reduced by 1 log, while that of Enterococcus faecalis BA64 was reduced by 3 logs. Lactobacillus brevis CECT 3810 did not survive pasteurisation, while the other Lactobacillus strains examined were more resistant; their viable numbers were reduced by about 2 logs. The two most resistant strains, E. durans IPLA 655 and Lactobacillus curvatus VI6, were subjected to higher temperatures. Enterococcus durans was completely inactivated at 78 °C, while some live cells of Lb. curvatus were observed. These results show that some native, metabolically active BA producers could be found in pasteurised milk owing to their resistance to the thermal treatment; their presence could have a negative impact on the final content of BAs in dairy products made from such milk.     

Development and characterization of dehydrated peanut–cowpea milk powder for use as a dairy milk substitute in chocolate manufacture

This study explored the feasibility of producing peanut–cowpea milk for use in vegetable milk chocolates. Development of the vegetable milk followed a 3 × 2 factorial design, with peanut–cowpea ratio (1:1, 1:2 and 1:3), and treatment with enzyme (i.e. enzyme hydrolyzed and non-hydrolyzed milk) as the factors. The milk was dehydrated and then milled using a hammer mill (mesh size 40). It was then used in recipes to produce chocolates and evaluated sensorially based on ranking for preference. Skimmed milk powder was used to produce the control chocolate. The ratio of cowpea to peanut affected the chemical and functional characteristics of the vegetable milk. Vegetable milk made from 1:2 ratios of peanuts:cowpea produced the most preferred chocolates. The successful application of this by industry will improve the utilization of the legume crops and enhance their market value.     

Smearing of soft cheese with Enterococcus faecium WHE 81, a multi-bacteriocin producer,against Listeria monocytogenes

Enterococcus faecium WHE 81, a multi-bacteriocin producer, was tested for its antimicrobial activity on Listeria monocytogenes in Munster cheese, a red smear soft cheese. The naturally delayed and superficial contamination of this type of cheese allowed the use of E. faecium WHE 81 at the beginning of the ripening as a surface culture. A brine solution inoculated at 10⁵ CFU of E. faecium WHE 81 per mL was sprayed on the cheese surface during the first smearing operation. On day 7, smearing of cheese samples with a brine solution at 10² CFU of L. monocytogenes per mL yielded initial cell counts of approximately 50 CFU g⁻¹ of the pathogen on the cheese surface. Although, in some instances, L. monocytogenes could survive (<50 CFU g⁻¹) in the presence of E. faecium WHE 81, it was unable to initiate growth. In control samples however, L. monocytogenes counts often exceeded 10⁴ CFU g⁻¹. In other respects, E. faecium WHE 81, which naturally existed in Munster cheese, did not adversely impact on the ripening process.     

Reading rate, readability, and variations in task-induced processing.

Tested the hypothesis that task variables account for previous findings that reading rate is unaffected by readability. In a study with 68 high school students, variations in a reading task were used to induce different processes during reading. When the S had to inspect a text to remember enough for a subsequent word match, easy texts were read faster than difficult texts. When word matching was attempted as the S read, easy texts were read no faster than difficult texts. Findings suggest that when appropriate reading tasks are chosen, reading rate can be used to infer underlying processes in reading. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Validation of the performance of a GMO multiplex screening assay based on microarray detection

A new screening method for the detection and identification of GMO, based on the use of multiplex PCR followed by microarray, has been developed and is presented. The technology is based on the identification of quite ubiquitous GMO genetic target elements first amplified by PCR, followed by direct hybridisation of the amplicons on a predefined microarray (DualChip^® GMO, Eppendorf, Germany). The validation was performed within the framework of a European project (Co-Extra, contract no 007158) and in collaboration with 12 laboratories specialised in GMO detection. The present study reports the strategy and the results of an ISO complying validation of the method carried out through an inter-laboratory study. Sets of blind samples were provided consisting of DNA reference materials covering all the elements detectable by specific probes present on the array. The GMO concentrations varied from 1% down to 0.045%. In addition, a mixture of two GMO events (0.1% RRS diluted in 100% TOPAS19/2) was incorporated in the study to test the robustness of the assay in extreme conditions. Data were processed according to ISO 5725 standard. The method was evaluated with predefined performance criteria with respect to the EC CRL method acceptance criteria. The overall method performance met the acceptance criteria; in particular, the results showed that the method is suitable for the detection of the different target elements at 0.1% concentration of GMO with a 95% accuracy rate. This collaborative trial showed that the method can be considered as fit for the purpose of screening with respect to its intra- and inter-laboratory accuracy. The results demonstrated the validity of combining multiplex PCR with array detection as provided by the DualChip^® GMO (Eppendorf, Germany) for the screening of GMO. The results showed that the technology is robust, practical and suitable as a screening tool.     

Preparation of a rice bran enzymatic extract with potential use as functional food

The production, stabilization, by enzymatic treatment, physicochemical composition, and biological properties (including the anti-proliferative activity), of a water-soluble rice bran enzymatic extract (RBEE) are described. The main component of RBEE is proteins (38.1%) – in the form of peptide and free amino acids – having a 6% content of sulfur amino acids. The second component is fat (30.0%), with oleic and linoleic acids as the major components, and 1.2 mg/g of γ-oryzanol. Carbohydrates (14.2%) are comprised mainly of slowly absorbed carbohydrates. Preliminary studies on the anti-proliferative effect of RBEE on leukemia tumor cell growth in vitro are also reported. This property makes RBEE potentially useful as a functional food for the treatment and prevention of chronic pathological states associated with abnormal proliferation of cells, as is the case with cancer.