Bipolar electric fatigue behaviour as a function of field strength in antiferroelectric (Pb,Ba,La)(Zr,Sn,Ti)O3 ceramics

The bipolar electric fatigue behaviour of antiferroelectric ceramics with the composition of Pb_0.88Ba_0.10La_0.02(Zr_0.55Sn_0.35Ti_0.10)O₃ was investigated under various cycling fields. The material exhibits a degradation in the maximum field induced strain, a diffuse AFE-FE phase transition and an enhancement in the diffusion character of the FE-AFE phase transition due to electric cycling. Those variations increase with cycle number, indicating a logarithmic fatigue up to 10⁸ cycles. There is no indication for the variations to be recovered, and the symmetry of the negative and positive parts of the strain hysteresis loops still remains. Higher cycling field results in a stronger deterioration of the maximum field induced strain and a larger extent of diffusion in AFE-FE and FE-AFE phase transitions. The normalized maximum strain shows nearly the same scale of degradation when the materials are cycled at various electric fields. After a heat treatment at 500°C for 1 h, the variations in the AFE-FE and FE-AFE phase transition due to cycling disappear, whereas the maximum strain resumes almost to its original value. Electrochemical variations are considered to contribute to the main fatigue mechanism for the material under investigation.     

Visibility of collaboration on the Web

The emerging influence of new information and communication technologies (ICT) on collaboration in science and technology has to be considered. In particular, the question of the extent to which collaboration in science and in technology is visible on the Web needs examining. Thus the purpose of this study is to examine whether broadly similar results would occur if solely Web data was used rather than all available bibliometric co-authorship data. For this purpose a new approach of Web visibility indicators of collaboration is examined. The ensemble of COLLNET members is used to compare co-authorship patterns in traditional bibliometric databases and the network visible on the Web. One of the general empirical results is a high percentage (78%) of all bibliographic multi- authored publications become visible through search of engines in the Web. One of the special studies has shown Web visibility of collaboration is dependent on the type of bibliographic multi-authored papers. The social network analysis (SNA) is applied to comparisons between bibliographic and Web collaboration networks. Structure formation processes in bibliographic and Web networks are studied. The research question posed is to which extent collaboration structures visible in the Web change their shape in the same way as bibliographic collaboration networks over time. A number of special types of changes in bibliographic and Web structures are explained. This revised version was published online in June 2006 with corrections to the Cover Date.     

The Difference in Turbulent Diffusion between the Active and Passive Scalars in a Thermally Stably Stratified Medium

The difference in the turbulent diffusion between the active (heat) and passive (mass) scalars in a thermally stably stratified medium is investigated. The axisymmetric problem is treated on the formation of a turbulent circulation flow above a heated disk and on the turbulent diffusion of a passive scalar (impurity) from a continuous surface source in a stably stratified medium. The results indicate that the thermal stratification causes appreciable differences in the coefficients of turbulent transfer between the active (heat) and passive (mass) scalars. This means that the assumption of the identity of the coefficient of turbulent diffusion of heat and mass, employed in conventional models of turbulence, produces significant errors in estimating the heat and mass transfer in a thermally stably stratified medium.     

CMOS circuit testing via time-resolved luminescence measurements and simulations

The continuous trend in modern CMOS technology toward smaller devices and faster clock frequency is challenging the picosecond imaging circuit analysis technique. In this paper we discuss the role of the single-photon avalanche diode with very sharp time resolution in testing CMOS circuits. Thanks to the 30 ps-time resolution, innovative measurements regarding delays and jitter are presented, along with a case study. A compact model of the luminescence is also proposed and used to compare on-chip electrical signals with optical waveforms.     

Implementation of a mechanics-based system for estimating the strength of timber

The most accurate way of determining the strength of lumber requires destructive testing. An intelligent mechanics-based lumber-grading system was developed to provide a better estimation of the strength of a board nondestructively. This system processed X-ray-extracted geometric features (of 1080 boards that eventually underwent destructive strength testing) by using finite element methods to generate associated stress fields. The stress fields were then fed to a feature-extracting-processor, which produced 26 strength predicting features. The best strength predicting features were determined from the coefficient of determination (correlation r/sup 2/) between the features and actual strengths of the boards. The coefficients of determination of each feature (or combination of features), with the actual strength of the board, were calculated and compared. A coefficient of determination of 0.4158 was achieved by using a longitudinal (along the local grain angle) maximum stress concentration (MSC) feature to predict the estimated strength of lumber.     

Properties of fine-grained graphites based on two-component fillers

The effect of the nature of two-component fillers on the physical and mechanical properties of finegrained graphites was studied using highly oriented needle coke and nearly isotropic synthetic graphite as components of fillers. Each filler was prepared in the form of coarse (-120 µm) and fine (-10 µm) powders. Different mixtures of these components were used in producing graphite samples, which were then characterized by density, thermal expansion, compressive strength, and modulus of elasticity measurements. The results demonstrate that the thermal expansion, compressive strength, and modulus of elasticity of the graphites thus prepared depend on the microtexture, size, and shape of the filler particles.Translated from Neorganicheskie Materialy, Vol. 40, No. 12, 2004, pp. 1448–1454.Original Russian Text Copyright © 2004 by Samoilov.     

Thermal Transformations of an Aluminoborophosphate Binder

Thermal transformations of a commercial aluminoborophosphate binder are studied in a broad temperature range by optical microscopy, x-ray diffraction, IR spectroscopy, and thermal analysis. The introduction of B₂O₃ reduces the temperature of phosphate polycondensation, enhances the stability of cyclometaphosphates in a broad temperature range (180–1100°C), and reduces the stability of hydrogen phosphates.     

The Simulation of Impact Loads on Beam-type Structures using a Pseudo-dynamic Procedure

Abstract:  This study proposes an alternate method for the analysis of beams with solid cross-section or built as a framed structure and subjected to transverse impact loads from an external striker. The procedure used in the analysis is a combination of two essential tools using pseudo-dynamic techniques. The method reported here involves only one degree of freedom for the structure modelling and assumes an elastic contact between an external striker and the beam structure, which in reality does not happen. As only one degree of freedom is considered in the analysis, some important limitations are inherent to the method proposed here. Essentially, there is the difficulty of modelling the displacement field associated with the transient structure behaviour accurately, as a consequence of fast-rate impact loads. Another difficulty faced by the method refers to a local structure behaviour associated with contact loads. The present method can deal with large displacements in transversely loaded beams associated to a collapse mechanism having a simple geometry and defined with precision from a single parameter. This ensures reasonable accuracy in the evaluation of the strain energy absorbing capacity of transversely impacted beam structures using a single degree of freedom model in a pseudo-dynamic procedure.