Bounds on the reliability of binary coherent systems

The structure function of a binary coherent system is approximated by using only a few of its minimal path sets and minimal cut sets. These two incomplete structure functions are represented as disjoint sums. The average of each is a lower and upper bound, respectively, for the system reliability. The usefulness of these bounds is demonstrated on example networks     

Influence of cooking and drying processes at different temperatures on the nutritive value of the protein of mussels (Mytilus edulis)

The effect of steam cooking (96 degrees C for 15 minutes) and drying at two temperatures, 70 degrees C and 110 degrees C, on nutritive value of mussel protein was studied. The measurements were carried out by nitrogen balance techniques in growing rats, and the nutritional parameters studied were: CD, BV and NPU. The crude digestibility (CD) values were: 87 +/- 1 and 82 +/- 1, and the biological values (BV), 80 +/- 1 and 74 +/- 1 for raw mussels, dried at 70 degrees C and at 110 degrees C respectively. This implies a significant decrease in the protein nutritive values of the mussel dried at a higher temperature. Cooking prior to drying significantly improved the digestibility and the biological value of the mussel's protein. In effect, improvement was so great, that the different drying temperatures did not affect the previously cooked product in a different way; therefore, the CD (94 +/- 1 and 94 +/- 1) and the BV (90 +/- 1 and 90 +/- 2) were the same for the mussel's protein, cooked and dried at 70 degrees C or at 110 degrees C.     

Effect of hot water spray washing on the appearance of lamb carcasses of different weights

Lamb carcasses of > 22 kg weight were not adversely affected by spray washing, but carcasses of < 22 kg weight were affected to some extent. Characteristics of carcasses significantly affected included the appearance of the fat in the crutch region and on the back, and the degree of flaccidity and dampness of the abdominal region. These faults were alleviated somewhat during refrigerated storage and consequently the faults detected in the experiments were probably not of commercial significance since, under pilot market tests in Europe, buyers did not find any faults in spray washed carcasses.     

Storage and Feeding Losses of Large Round Bales

Alfalfa was harvested in large round bales or small square bales and storage and feeding losses were determined for different storage methods. Large bales were stored 1) in a barn; 2) outside in single rows and uncovered; 3) outside in two-high stacks and covered; and 4) outside in three-high stacks and covered. These bales were fed to dairy heifers with small square bales for comparison. Dry matter storage losses were 2% for large bales stored inside, 6% for large bales stored outside covered, and 15% for large bales stored outside uncovered. Feeding losses of large bales were 12% for stored inside, 25% for stored outside uncovered, and 13 to 15% for stored outside covered. Total losses for large round bales were 40% (stored outside uncovered), 20% (stored outside covered) and 15% (stored inside). Intake and gains were greatest for small bales (2.35 kg/100 kg body weight and .77 kg/d, respectively) and least for large bales (2.11 kg/100 kg body weight and .54 kg/d) stored outside uncovered.Rain penetrated 10 to 25 cm into uncovered bales stored outside. The resulting weathered hay, about 40% of the original bale dry weight, deteriorated. Heifers rummaged through this unpalatable material, and large feeding losses resulted. Storage and feeding losses of large round bales stored outside are economically important enough to warrant protection of bales.     

Kinetic studies of the electrochemical reaction between lithium and phthalocyanine II. Reduction reaction mechanism

The effects, during formation, of current density, charge capacity, and concentration and temperature of H₂SO₄ electrolyte on the capacity of tubular electrodes in lead/acid batteries have been studied. Electrode capacity was found to be maximum at a H₂SO₄ concentration of 1.05 sp. gr., a charge amount of 250% theoretical capacity, a current density of 0.44 A dm^?2, and an electrolyte temperature of 40 °C. A study of the soaking process for tubular electrodes showed the electrode capacity to be maximum when the acid absorption was about 170 mg of H₂SO₄ per g of oxide. Finally, the discharge overpotential of tubular electrodes was analyzed by a galvanostatic transient method.     

Adiabatic shear bands on the titanium side in the titanium/mild steel explosive cladding interface: Experiments, numerical simulation, and microstructure evolution

The microstructure and microtexture in adiabatic shear bands (ASBs) on the titanium side in the titanium/mild steel explosive cladding interface are investigated by means of optical microscopy, scanning electron microscopy/electron backscattered diffraction (SEM/EBSD), and transmission electron microscopy (TEM). Highly elongated subgrains and fine equiaxed grains with low dislocation density are observed in the ASBs. Microtextures (25 deg, 75 deg, 0 deg), (70 deg, 45 deg, 0 deg), and (0 deg, 15 deg, 30 deg) formed within the ASBs suggest the occurrence of the recrystallization. The grain boundaries within ASBs are geometrically necessary boundaries (GNBs) with high angles. Finite element computations are performed to obtain the effective strain and temperature distributions within the ASBs under the measured boundary conditions. The rotation dynamic recrystallization (RDR) mechanism is employed to describe the kinetics of the nanograins’ formation and the recrystallized process within ASBs. During the deformation time (about 5 to 10 μs), the following processes take place: dislocations accumulate to form elongated cell structures, cell structures break up to form subgrains, and subgrains rotate and finally form recrystallized grains. The small grains within ASBs are formed during the deformation and do not undergo significant growth by grain boundary migration after deformation.     

A compact fiber-optic magnetometer employing an amorphous metalwire transducer

A compact fiber-optic magnetometer constructed using a short piece of amorphous metal wire (5-cm long×100-μm diameter) as the magnetostrictive transducer is discussed. The inherently large ratio of length to cross-sectional area results in a low demagnetization along the axial direction. A magnetostrictive constant of 5×10^-5 /Oe², which is 10-50 times larger than the reported values for transducers made from Metglas ribbons, was measured. Minimum detectable magnetic fields on the order of 10^-5 Oe/Hz^1/2 at 1 Hz were achieved using a 5-cm-long sensing fiber     

Fire and explosion hazards in the spray drying of milk

Recent reports in the literature indicate that incidents involving fires and explosions in the spray drying of milk products are increasing in number. Whilst milk powder is not highly explosible, the conditions for a dust explosion, apart from the ignition source are almost always present in certain areas of a spray dryer during its normal operation. Self-ignition of deposits is known to be possible at the high temperatures in a spray dryer. At best, this can cause product degradation and discolouration whilst at worst it can provide the source of ignition for an explosion. This paper is an attempt to draw together recent work on fire and explosion prevention and protection formilk powders.