Optimal biocompatible solvent design for a two-stage extractive fermentation process with cell recycling

In this study, crisp and fuzzy multiple-goal optimization approaches are respectively introduced to design an optimal biocompatible solvent to a two-stage extractive fermentation with cell recycling for ethanol production. When designing a biocompatible solvent for the extractive fermentation process, many issues, such as extractive efficiency, conversion, amount of solvent utilized and so on, have to be considered. An interactive multiple-goal design procedure is introduced to determine a trade-off result in order to satisfy such contradicted goals. Both approaches could be iterated to solve the interactive multiple-goal design problem in order to yield a trade-off result. However, the crisp optimization design is a tedious task that requires the designer to provide various pairs of the upper bounds for the design problem to obtain the corresponding solution. The fuzzy optimization approach is able to be trade-off several goals simultaneously and to yield the overall satisfactory grade for the product/process design problem.     

The deposition morphology of Brownian/non-Brownian particles within a constricted tube

The deposition morphology of Brownian/non-Brownian particles within a constricted tube is investigated by applying the Brownian dynamics simulation method in the present paper. Two different geometric structures, the parabolic constricted tube (PCT) and the sinusoidal constricted tube (SCT), are adopted. The effect of various types of the total interaction energy curves of the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, and of the shadow area cast by those deposited particles, on the particles’ collection efficiencies are also examined. For the PCT structure, under the same interaction energy curve, it is found that the non-Brownian particles always own a higher collection efficiency than that of the Brownian particles. Since the deposition location moves closer to the constriction part of the tube, the collection efficiencies of the Brownian/non-Brownian particles increase with the decrease of flow velocity. The SCT behaves differently, it is found that the collection efficiencies of non-Brownian particles are only slightly higher than those of Brownian particles when SCT is adopted. The steep slope of the tube wall near the constriction part of SCT dominates the whole deposition process of Brownian/non-Brownian particles. In comparison with the available experimental data, it is found that the present method can give a good simulation result.     

Effects of initial powder vibrogrinding on the properties of AlN - BN composites

A study has been made on the effects of initial vibroground powders with various grain sizes on the properties of AlN - BN composites. As the specific surface of these powders increases, so do the density, mechanical strength, and thermal resistance of the composites.     

Research on the Distant Hybrids of Wheat Obtained via Low-Energy Ion-Beam Implantation

Abstract The whole DNA of soybean was implanted into four varieties of wheat of Zhongyu5, Huaiyin 9628, Wenyou 1, Jimai 5 respectively via ion-beam mediation. There were 5 plantsobtained whose protein content was higher than 18.5%, the highest one was 21.44%. There were 3plants obtained whose protein content was lower than 11.5%, the lowest one was 10.96%. We cansee that the whole DNA of soybean transformed into wheat via ion beam implantation can inducethe increase in wheat protein content dramatically. The result also shows that the transformationefficiency of different gene types of wheat receptor varies greatly that the implanting time has acertain effect on the efficiency of transformation.     

Methods and results of tests of a large model of the TUK-84 container

Tests of a prototype model of TUK-84 and the corresponding experimental procedures used at the test center of the All-Russia Research Institute of Technical Physics are described. The results are presented, and it is shown that the prototype withstood the tests. __________ Translated from Atomnaya énergiya, Vol. 100, No. 6, pp. 441–445, June, 2006.     

Ultrasonic thin-walled tube wave structure for sensing devices

Theoretical and experimental investigations of thin-walled tube acoustic wave devices for gravimetric sensing applications are presented. Integrated sensor configurations have been demonstrated by employing a sol-gel processed thin piezoelectric lead zirconate titanate (PZT) film. This was coated coaxially on stainless steel tubes and interdigital transducers (IDT) fabricated as the transmitter and receiver on the curved tube surfaces. We have observed tube waves along both the axial and circumferential directions between 1 and 6.6 MHz. We have also analyzed the mass sensitivities of different modes propagating along the tubes and shown that high mass sensitivity can be achieved by keeping the tube wall thin