Effect of Varying Amount of Polyethylene Glycol (PEG-600) and 3-Aminopropyltriethoxysilane on the Properties of Chitosan based Reverse Osmosis Membranes

Chitosan and polyethylene glycol (PEG-600) membranes were synthesized and crosslinked with 3-aminopropyltriethoxysilane (APTES). The main purpose of this research work is to synthesize RO membranes which can be used to provide desalinated water for drinking, industrial and agricultural purposes. Hydrogen bonding between chitosan and PEG was confirmed by displacement of the hydroxyl absorption peak at 3237 cm⁻¹ in pure chitosan to lower values in crosslinked membranes by using FTIR. Dynamic mechanical analysis revealed that PEG lowers Tg of the modified membranes vs. pure chitosan from 128.5 °C in control to 120 °C in CS-PEG5. SEM results highlighted porous and anisotropic structure of crosslinked membranes. As the amount of PEG was increased, hydrophilicity of membranes was increased and water absorption increased up to a maximum of 67.34%. Permeation data showed that flux and salt rejection value of the modified membranes was increased up to a maximum of 80% and 40.4%, respectively. Modified films have antibacterial properties against Escherichia coli as compared to control membranes.     

Ontology based E-learning framework: A personalized,adaptive and context aware model

Multimedia Tools and Applications - Enhancing the degree of learner productivity, one of the major challenges in E-Learning systems, may be catered through effective personalization, adaptivity and...     

A review of hashing based image authentication techniques

Multimedia Tools and Applications - In the recent digitization era, image hashing is a key technology, including image recognition, authentication and manipulation detection, among many multimedia...     

Numerical and sensitivity analysis of MHD bioconvective slip flow of nanomaterial with binary chemical reaction and Newtonian heating

The impact of Stefan blowing on the MHD bioconvective slip flow of a nanofluid towards a sheet is explored using numerical and statistical tools. The governing partial differential equations are nondimensionalized and converted to similarity equations using apposite transformations. These transformed equations are solved using the Runge–Kutta–Fehlberg method with the shooting technique. Graphical visualizations are used to scrutinize the effect of the controlling parameters on the flow profiles, skin friction coefficient, local Nusselt, and Sherwood number. Moreover, the sensitivities of the reduced Sherwood and Nusselt number to the input variables of interest are explored by adopting the response surface methodology. The outcomes of the limiting cases are emphatically in corroboration with the outcomes from preceding research. It is found that the heat transfer rate has a positive sensitivity towards the haphazard motion of the nanoparticles and a negative sensitivity towards the thermomigration. The thermal field is enhanced by the Stefan blowing aspect. Moreover, the fluid velocity can be controlled by the applied magnetic field.     

Thin-film iron-oxide nanobeads as bifunctional electrocatalyst for high activity overall water splitting

Developing only Fe derived bifunctional overall water splitting electrocatalyst both for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) while performing at low onset overpotential and with high catalytic stability is a rare instance. We present here the first demonstration of unique iron-oxide nanobeads (FeO_x-NBs) based electrocatalyst executing both OER and HER with high activity. Thin-film electrocatalytic FeO_x-NBs assembly is surface grown via simple spray coating (SC). The unique SC/FeO_x-NBs propels OER initiating water oxidation just at 1.49 V_RHE (η = 260 mV) that is the lowest observable onset potential for OER on simple Fe-oxide based catalytic films reported so far. Catalyst also reveals decently high HER activity and competent overall water splitting performance in the FeO_x-NBs two-electrode system as well. Catalyst also presents stable kinetics, with promising high electrochemically active surface area (ECSA) of 1765 cm², notable Tafel slopes of just 54 mV dec^1? (OER) and 85 mV dec^1? (HER), high exchange current density of 1.10 mA cm^2? (OER), 0.58 mA cm^2? (HER) and TOF of 74.29s^1?@1.58V_RHE, 262s^1?@1.62V_RHE (OER) and 82.5s^1?@-0.45V_RHE, 681s^1?@-0.56V_RHE (HER).     

Coherent control of symmetric and asymmetric diffraction grating via relative phase

ABSTRACT

We present a theoretical model to realize the symmetric and asymmetric diffraction grating in a four-level atomic medium. The proposed atomic medium follows a double lambda configuration where four fields interact with it. We get control over symmetric and asymmetric behavior of the diffraction grating by manipulating the relative phase of the fields. Interestingly, the symmetric and asymmetric diffraction grating become prominent when the vortex beam is used instead of the plane wave. Enhanced first, second, and third-order diffraction gratings are achieved via the vortex beam. Further, we find control over asymmetric diffraction gratings by the relative phase of the fields. Coherent control of asymmetric diffraction grating in negative and positive diffracted angles is also achieved via the relative phase.     

Exploring network-level performances of wireless nanonetworks utilizing gains of different types of nano-antennas with different materials

Wireless nanonetworks are not a simple extension of traditional communication networks at the nano-scale. Owing to being a completely new communication paradigm, existing research in this field is still at an embryonic stage. Furthermore, most of the existing studies focus on performance enhancement of nanonetworks via designing new channel models and routing protocols. However, the impacts of different types of nano-antennas on the network-level performances of the wireless nanonetworks remain still unexplored in the literature. Therefore, in this paper, we explore the impacts of different well-known types of antennas such as patch, dipole, and loop nano-antennas on the network-level performances of wireless nanonetworks. We also investigate the performances of nanonetworks for different types of traditional materials (e.g., copper) and for nanomaterials (e.g., carbon nanotubes and graphene). We perform rigorous simulation using our customized ns-2 simulation to evaluate the network-level performances of nanonetworks exploiting different types of nano-antennas using different materials. Our evaluation reveals a number of novel findings pertinent to finding an efficient nano-antenna from its several alternatives for enhancing network-level performances of nanonetworks. Our evaluation demonstrates that a dipole nano-antenna using copper material exhibits around 51% better throughput and about 33% better end-to-end delay compared to other alternatives for large-size nanonetworks. Furthermore, our results are expected to exhibit high impacts on the future design of wireless nanonetworks through facilitating the process of finding the suitable type of nano-antenna and suitable material for the nano-antennas.