X波段85W功率放大模块微带电路设计

针对X波段50 W GaN功放管电路进行改进设计,在满足原有指标的条件下,同时提高电路工作稳定性;巧妙改变微波电路结构,去除了原电路所用的电感,并在不影响电路指标的前提下适当减少了电容、电阻的用量,为整个电路的设计节约了成本。同时,仿真并制作了Wilkinson功分功合器。最终得到85 W功率放大模块,并给出了测试结果。     

工业废渣磷石膏用作充填材料的研究

研制了以工业废渣磷石膏为基材的充填材料.改性后磷石膏的耐水性大大增强,抗压强度≥0.79 MPa、渗透系数≤1×10-5cm.s-1,并且具有合适的C、Φ值.     

Evaluation of a haptics-based virtual reality temporal bone simulator for anatomy and surgery training

Introduction

Virtual reality simulation training may improve knowledge of anatomy and surgical skills. We evaluated a 3-dimensional, haptic, virtual reality temporal bone simulator for dissection training.

Methods

The subjects were 7 otolaryngology residents (3 training sessions each) and 7 medical students (1 training session each). The virtual reality temporal bone simulation station included a computer with software that was linked to a force-feedback hand stylus, and the system recorded performance and collisions with vital anatomic structures. Subjects performed virtual reality dissections and completed questionnaires after the training sessions.

Results

Residents and students had favorable responses to most questions of the technology acceptance model (TAM) questionnaire. The average TAM scores were above neutral for residents and medical students in all domains, and the average TAM score for residents was significantly higher for the usefulness domain and lower for the playful domain than students. The average satisfaction questionnaire for residents showed that residents had greater overall satisfaction with cadaver temporal bone dissection training than training with the virtual reality simulator or plastic temporal bone. For medical students, the average comprehension score was significantly increased from before to after training for all anatomic structures. Medical students had significantly more collisions with the dura than residents. The residents had similar mean performance scores after the first and third training sessions for all dissection procedures.

Discussion

The virtual reality temporal bone simulator provided satisfactory training for otolaryngology residents and medical students.     

Automatic moment segmentation and peak detection analysis of heart sound pattern via short-time modified Hilbert transform

This paper proposes a novel automatic method for the moment segmentation and peak detection analysis of heart sound (HS) pattern, with special attention to the characteristics of the envelopes of HS and considering the properties of the Hilbert transform (HT). The moment segmentation and peak location are accomplished in two steps. First, by applying the Viola integral waveform method in the time domain, the envelope (E_T) of the HS signal is obtained with an emphasis on the first heart sound (S1) and the second heart sound (S2). Then, based on the characteristics of the E_T and the properties of the HT of the convex and concave functions, a novel method, the short-time modified Hilbert transform (STMHT), is proposed to automatically locate the moment segmentation and peak points for the HS by the zero crossing points of the STMHT. A fast algorithm for calculating the STMHT of E_T can be expressed by multiplying the E_T by an equivalent window (W_E). According to the range of heart beats and based on the numerical experiments and the important parameters of the STMHT, a moving window width of N = 1 s is validated for locating the moment segmentation and peak points for HS. The proposed moment segmentation and peak location procedure method is validated by sounds from Michigan HS database and sounds from clinical heart diseases, such as a ventricular septal defect (VSD), an aortic septal defect (ASD), Tetralogy of Fallot (TOF), rheumatic heart disease (RHD), and so on. As a result, for the sounds where S2 can be separated from S1, the average accuracies achieved for the peak of S1 (AP₁), the peak of S2 (AP₂), the moment segmentation points from S1 to S2 (AT₁₂) and the cardiac cycle (ACC) are 98.53%, 98.31% and 98.36% and 97.37%, respectively. For the sounds where S1 cannot be separated from S2, the average accuracies achieved for the peak of S1 and S2 (AP₁₂) and the cardiac cycle ACC are 100% and 96.69%.     

Water-soluble and amphiphilic polymers

Summary Three PEO-PSt-PEO triblock polymers and their parent ho-nopolystyrene have been studied by means of light scattering technique in chloroform, toluene and ethyl acetate. It has been found that the weight average molecular weights calculated by using the equation Mapp- were unbelievable negative values; and the largest deviation appeared for the sample with PEO mole content of about 50%. Data of PSt-PEO-PSt triblock polymers in literature have been quoted and discussed.     

Morphology and properties of blends of polypropylene with ethylene-propylene rubber

Great attention has been paid to the toughening of isotactic polypropylene (PP) in recent years in order to make full use of this plastic. This paper presents the results of our study on the compatibility of PP with ethylene-propylene-diene rubber (EPT), polybutadiene rubber (PB) or styrene-butadiene rubber (SBR) through characterization of the blends' morphology, and on. the morphology and properties of binary blends of PP with EPT (EPT/PP) and ternary blends of PP, EPT, and polyethylene (PE) (EPT/PE/PP). Morphological structure of solution blends and the great improvement in low-temperature impact strength and other properties of the mechanical blends have shown the difference among EPT, PB, and SBR in compatibility with PP, the effectiveness of using EPT as PP's toughening agent, and the effect of EPT on EPT/PP blend as both toughening agent and compatibilizer. Addition of EPT to EPT/PP made interesting changes in morphology but no effect on properties was observed.     

基于引力搜索算法的分数阶变异时序回归GSA-TSGM(1,1)模型

为了利用分数阶累加算子在灰色短期预测中的高效性能,首次将分数阶累加算子引入变异时序回归模型以期取得更高的预测精度。主要方法如下：首先取湖北省链子崖某监测点1978—1987年的十年数据作为训练集并使用引力搜索算法确定最佳分数阶累加阶数,而1988—1993年的六年数据作为验证集验证提出的模型;其次对比了经典灰色模型GM(1,1)、分数阶累加灰色模型、变异时序回归模型TSGM(1,1)三种灰色模型。结果如下：首先修正了陈西江等人变异时序回归模型仿真时出现的错误,其次表明了相比于其他的模型,基于引力搜索算法的分数阶累加时序回归模型在进行灰色长期预测中具有较高的预测精度。因此,通过分数阶累加算子提高了灰色理论中长期预测模型的精度,为灰色长期预测提供了指导。     

C207甲醇合成铜基催化剂本征失活动力学

一、前言工业生产中广泛使用的甲醇合成铜基催化剂具有活性高、选择性好、起始活性温度低等优点。但铜基催化剂抗毒性能差,影响了它的使用寿命。铜基催化剂的主要毒物是原料气中所含的 H_2S。铜基催化剂 H_2S 中毒失活研究,国内未见报道,美国的 Wood 等和 Rdvodic 等作过一些研究。本文通过对国产 C207铜基催化剂硫化氢中毒失活动力学的研究,建立描述活性衰退过程的失活动力学方程,得到活性与硫化     

普钙产品转化率的数值计算方法

对影响普钙产品转化率的各种因素进行了分析,利用MATLAB 软件包得到了转化率的计算公式,提出了确定未分解磷矿的比例和由倍半氧化物引起的有效磷退化幅度的方法,为生产系统的预测和调整提供了一种途径。     

Coverage enhancement by using the mobility of mobile sensor nodes

Coverage is a fundamental problem in sensor networks. Sensor coverage, which reflects how well a sensor network is monitored by sensors, is an important measure for the quality of service (QoS) that a sensor network can provide. In mobile sensor networks, the mobility of sensor nodes can be utilized to enhance the coverage of the network. Since the movement of sensor nodes will consume much energy, this mobility of sensor nodes should be properly managed by some pre-defined schemes or protocols. By noticing this issue, some existing works have proposed several movement-assisted sensor deployment schemes. These works assume that the target field is a 2-dimensional space. In this paper, we study a generalized case of this problem whereby the target field can be a space which ranges from 1-dimensional to 3-dimensional. Two variations of the movement-assisted sensor deployment problem with different optimization objectives were formulated. We identify a set of basic attributes which can be used as guidelines for designing movement-assisted sensor deployment schemes. Based on these attributes, we propose efficient algorithms for both variants of the movement-assisted sensor deployment problem.