Research on topology control based on Voronoi diagram algorithm in FSO networks

Telecommunication Systems - In a wireless sensor network (WSN) where positioning information is not assumed or is partially available, efficient data access is a very challenging issue especially...     

High Optical Gain of Solution-Processed Mixed-Cation CsPbBr3 Thin Films towards Enhanced Amplified Spontaneous Emission

A solution-processed thin film made of all-inorganic CsPbBr₃ perovskite is a promising candidate for low-cost and flexible green-color lasers. However, the amplified spontaneous emission (ASE) of solution-processed CsPbBr₃ films still experiences a high threshold owing to poor morphology and insufficient optical gain. Here, a multiple-cation doping strategy is demonstrated to develop compact, smooth thin films of Cs_0.87(FAMA)_0.13PbBr₃/(NMA)₂PbBr₄ (FA: formamidinium; MA: methylammonium; NMA: naphthylmethylammonium) with a record high net modal optical gain of ≈ 3030 cm⁻¹ and low propagation loss of 1.0 cm⁻¹. The FA and MA cations improve the crystallization kinetics to form continuous films, and the NMA cations reduce the grain dimension, increase film dispersibility/uniformity, and enhance spatial confinement to promote optical gain. Room-temperature ASE is demonstrated under a low threshold of ≈ 3.8  µ J cm⁻² without degradation after four months of storage in glove box or excitation by 3 × 10⁷ laser pulses. These findings provide insights into enhancing the optical gain and lowering the threshold of perovskite lasers in terms of molecular synthesis and microstructure engineering.     

基于正交试验的细菌觅食算法的全局最优化

细菌觅食算法在求解全局最优化问题时的性能大部分依赖于参数的设置,各参数的值不同,则细菌觅食算法的收敛速度和得到的最优解也不同。本文主要介绍了用正交试验的方法设置细菌觅食算法的参数来求解全局最优化的问题,通过正交试验方法来检测多组参数对细菌觅食算法效率的影响,用经典的测试函数数对这种组合方案进行检测对比,通过对实验结果数据分析可得出参数的最佳组合方案。最终实验结果表明用正交试验法设置的细菌觅食算法的参数组合方案可以提高算法的效率和收敛速度,使算法能够更快更好的得到测试函数的近似最优解。     

Magnetoelectric Coupling for Metal–Air Batteries

Metal–air batteries have become one of the new potential sources of electrochemical energy due to the excellent electrochemical characteristics, environmental friendliness and cheap cost. Whereas, the commercialization of the metal–air batteries is still subject to the sluggish kinetics on air electrode and hydrogen evolution corrosion as well as dendrite growth of metal anode. Recently, the applied magnetic field, as a technology for transferring energy across physical space, receives more attention, can improve the performance of metal–air batteries by promoting mass transfer, accelerating charge transfer and enhancing electrocatalytic ability based on magnetohydrodynamic effect, Kelvin force effect, Hall effect, Spin selectivity effect, Maxwell stress effect and Magnetothermal effect. This review provides the recent progress in the research on the relative mechanism and characteristic of the magnetic field in the metal–air batteries.     

基于物联网的矿井温、湿度检测系统设计

为了实现对矿井温、湿度检测,提出了一种基于物联网的矿井温、湿度检测系统,并完成了系统的软硬件测试。硬件包括由分布在矿井中的测量节点组成的无线传感网络,由基站节点和监控终端设备相连接形成的监控装置,软件采用MSP430进行编程,并实现了温湿度信号检测。实际应用表明,该系统具有体积小,部署方便,成本低廉等优点。     

Prestoring Lithium into Stable 3D Nickel Foam Host as Dendrite‐Free Lithium Metal Anode

Lithium metal is considered a “Holy Grail” of anode materials for high‐energy‐density batteries. However, both dendritic lithium deposition and infinity dimension change during long‐term cycling have extremely restricted its practical applications for energy storage devices. Here, a thermal infusion strategy for prestoring lithium into a stable nickel foam host is demonstrated and a composite anode is achieved. In comparison with the bare lithium, the composite anode exhibits stable voltage profiles (200 mV at 5.0 mA cm^?2) with a small hysteresis beyond 100 cycles in carbonate‐based electrolyte, as well as high rate capability, significantly reduced interfacial resistance, and small polarization in a full‐cell battery with Li₄Ti₅O₁₂ or LiFePO₄ as counter electrode. More importantly, in addition to the fact that lithium is successfully confined in the metallic nickel foam host, uniform lithium plating/stripping is achieved with a low dimension change (merely ≈3.1%) and effective inhibition of dendrite formation. The mechanism for uniform lithium stripping/plating behavior is explained based on a surface energy model.     

单相光伏并网逆变器无差拍控制的研究与仿真

光伏并网逆变器是光伏发电系统的主要部件,为了达到更好的效率输出更高质量的电能,对逆变器电流进行快速有效的控制尤为关键。该文简单介绍了当前光伏并网逆变器的几种常用控制方法及其基本思想,分析了并网逆变器的工作原理和无差拍控制方法的原理,给出了逆变器脉冲宽度的计算和参考电流的获取方法,通过MATLAB/Simulink软件仿真表明,无差拍控制在单相光伏并网逆变器控制中动态响应特性好,控制方便,电流跟踪电网电压波形好。     

LDMOS 功率器件在固态雷达发射系统中应用研究与实践

介绍了LDMOS 功率器件的特性,通过与传统Si 功率器件相比较,LDMOS 器件具有低成本、高增益、高线性度、热稳定性好和高可靠性等特点,在固态雷达发射系统中有广阔的应用前景,本文对LDMOS 功率器件在固态雷达发射系统中应用进行理论分析,并利用LDMOS 功率器件设计制作了P 波段300W 功放组件,对LDMOS 功率放大组件进行性能测试,根据试验数据分析应用LDMOS 功率器件对固态雷达发射系统的影响。     

基于Zigbee的气田智能无线数据采集系统的设计

气田井口管道数据采集是智能化气田生产与安全监控的关键技术。针对目前有线仪表存在的问题,文章设计了基于Zigbee的气田井口无线温度、压力、流量仪表数据采集与传输系统,确保了数据的实时采集与安全传输。通过在现场测试,无线Zigbee仪表采集系统能实时反映气田井口的温度、压力与流量数据,实现了气田的异常报警与安全生产,在智慧化气田的生产中有很好的应用前景。