Using genetic algorithm for the optimization of seismic behavior of steel planar frames with semi-rigid connections

Beam-column connections have a significant role in the results of the analysis and the design of steel frames. In this paper, a genetic algorithm has been used for the non-linear analysis and design of steel frames. For minimizing the weight of frames, while satisfying the applied constraints and restraints such as the limits of normal and combined stresses, criteria such as target displacement(s) and the number and locations of plastic hinges were used. To analyze and design the frame elements, I and box-shaped standard sections were used for beams and columns, respectively. Finally, some clues for finding optimizing semi-rigid connection stiffness values for beam-to-column connections have been obtained. The degrees of these rigidities are obtained by a genetic algorithm during the procedure of optimization in order to reach a frame with the minimum weight. SAP2000 structural analysis program was used to perform modal analysis and linear and non-linear static solutions as well as the design of the elements. A MATLAB program was written for the process of optimization. The procedure of optimization was based on a weight minimization carried out for 9 steel frames. Thus, the optimum connection stiffness could be obtained for minimizing the weight of the structure. The results show that the non-linear analysis gives less weight for short period frames with semi-rigid connections compared to those of linear ones. However, by increasing the periods of frames, much less weights are obtained in the case of non-linear analysis with semi-rigid connections.     

Stimulation of large-conductance Ca2+-activated K+ channels by Evans blue in cultured endothelial cells of human umbilical veins

The effect of Evans blue (EB) on large-conductance Ca2+-activated K+ (BKCa) channels was investigated in cultured endothelial cells of human umbilical veins. In whole-cell configuration, EB (50 microM) reversibly increased the amplitude of K+ outward currents (IK). When the patch pipettes were filled with 10 mM EGTA, its stimulatory effect on IK was unaltered. Further application of EB in the presence of suramin, a blocker of P2-purinergic receptor, or AOPCP, an inhibitor of 5'-nucleotidase, still increased IK. However, charybdotoxin (100 nM) suppressed EB-induced increase in IK. In inside-out configuration, bath application of EB (50 microM) did not change single channel conductance but significantly increased the activity of BKCa channels. The EB-induced increase in the activity of BKCa channels was independent on internal Ca2+. EB (50 microM) shifted the activation curve of BKCa channels to less positive membrane potentials by approximately 20 mV. The change in the kinetic behavior of BKCa channels caused by EB in these cells is due to an increase in mean open time and a decrease in mean closed time. These results indicate that EB can stimulate the activity of BKCa channel in endothelial cells. This effect is unrelated to its blockade of P2-purinergic receptors or inhibition of 5'-nucleotidase. The direct stimulation of these ionic channels by EB may contribute to its effect on capillary permeability.     

The effect of Graphitization on the Mechanical Properties of twodimensional carbon – carbon composites

In this article the effect of graphitization in twodimensional c-c composite bodies prepared by impregnation of novalak resin is reported. Mechanical properties were determined by bending tests and microstructural features were studied by SEM and XRD. It was found that primary graphitization at 2300°C followed by graphitization at 2500°C improves the mechanical strength remarkably. Repeated graphitization and long – term treatment at 2500°C, however, found to have an adverse effect. Microstructural observations revealed that the level of strength is mainly controlled by a sheath developed around the fibre during graphitization. Applying an improper thermal regime affects the matrix – fibre adherence and may cause the destruction of the fibres. This enhances the crack propagation and causes early failure of composite body under loading.     

Response map properties of units in the dorsal cochlear nucleus of barbiturate-anesthetized gerbil (Meriones unguiculatus)

The response map scheme introduced by Evans and Nelson (1973) and modified by others, including Davis et al. (1996) for use with gerbils, has been used primarily for classifying units recorded in the cochlear nucleus of unanesthetized decerebrate preparations. Units lacking spontaneous activity (SpAc) have been classified as either type I/III or type II units based on the relative strength of their responses to broad-band noise compared to their responses to best-frequency (BF) tones. The relative noise index (rho), a ratio of these responses after SpAc is subtracted out, provides a convenient measure of this relative strength. In this paper, responses of 320 units recorded in the dorsal cochlear nucleus (DCN) of barbiturate-anesthetized gerbils to short-duration BF tones and broad-band noise were recorded. Since 87.5% of these units lacked SpAc, their response maps resembled those of type II and type I/III units. Units were characterized by rho and the normalized slope (m) of a best line fit to the BF rate versus level plot starting from the sound level corresponding to the first inflection point of the rate curve (typically its maximum value or the start of its sloping saturation). The distributions of rho and m values do not form distinct clusters as they do for units in the decerebrate preparation. Thus, the criteria developed for classifying DCN units in the decerebrate preparation do not appear appropriate for units in the barbiturate-anesthetized preparation. Deposits of horseradish peroxidase were used to locate 52 units. Most of the low SpAc units, 56% with poor noise responses (5/9) and nearly 70% with strong noise responses (25/36), and nearly all of the high SpAc units (6/7), were located either within or below the fusiform cell layer.     

Multiplexed DNA sequencing and diagnostics by hybridization with enriched stable isotope labels

A new DNA diagnostic and sequencing system has been developed that uses time-of-flight resonance ionization mass spectrometry (TOF-RIMS) to provide a rapid method of analyzing stable isotope-labeled oligonucleotides in form 1 sequencing by hybridization (SBH). With form 1, the DNA is immobilized on a nylon membrane and enriched isotope-labeled individual oligonucleotide probes are free to seek out complementary DNAs during hybridization. The major advantage of this new approach is that multiple oligonucleotides can be labeled with different enriched isotopes and can all be simultaneously hybridized to the genosensor matrix. The probes can then be simultaneously detected with TOF-RIMS with high selectivity, sensitivity, and efficiency. By using isotopically enriched tin labels, up to 10 labeled oligonucleotides could be examined in a single hybridization to the DNA matrix. Greater numbers of labels are available if rare earth isotopes are employed. In the present study, matrices containing three different DNAs were prepared and simultaneously hybridized with two different probes under a variety of conditions. The results show that DNAs, immobilized on nylon surfaces, can be specifically hybridized to probes labeled with different enriched in isotopes. Discrimination between complementary and noncomplementary sites of better than 100 was obtained in multiplexed samples. This new SBH method, which employs stable isotopic labels to locate target DNAs and TOF-RIMS to detect the labels, will be a very versatile and extensive multiplexing method.     

Transcrystalline morphology of nylon 6 on the surface of aramid fibers

In this paper, the isothermal crystallization of nylon 6 in the presence of Kevlar 129 fiber was investigated by polarized optical microscopy (POM). The formation of a transcrystalline domain was found to be mainly controlled by crystallization conditions, such as the temperature of the isothermal crystallization, residual time at melting temperature and the cooling rate of the melt. The nucleation rate of nylon 6 on the fibers was mainly affected by the crystallization temperature. The interfacial transcrystallinity of nylon 6 occurred on the surface of Kevlar 129 fiber in the temperature range 130–190 °C. The reason for the formation of interfacial transcrystalline morphology is discussed from the molecular level, based on the understanding of the packing mode of nylon 6 chains around fibers and the interaction between matrix and fibers. It was found that the lattice matching and hydrogen‐bonding between nylon 6 and poly(p‐phenylene terephthalamide) (PPTA) crystals play an important role in the epitaxial crystallization. Copyright © 2004 Society of Chemical Industry     

Measurement of the magnetic fields of high-voltage substations (230 kV) in Tehran (Iran) and comparison with the ACGIH threshold limit values

Measurements were made according to IEEE standard 644-1994 at a height of 1 m above floor level. It is concluded that none of the measurements exceeded the ACGIH threshold limit value. Among all control rooms the highest measured density amount is 0.69 μT in the control room of Ozgol substation and the lowest is 0.2 μT in the post of Shahid Firouzi. The control room of Ozgol substation is located in the second floor and bus-bars are located at a short distance from the window on the east, and so the highest recorded magnetic field is measured in this control room. Among all switchgear parts the highest amount 9.15 μT is measured in Kan substation. None of the measurements exceeded the ACGIH threshold limit value.