Reactivity feedback coefficients of a low enriched uranium fuelled material test research reactor at end-of-life

The reactivity feedback coefficients at end-of-life of a material test reactor fuelled with low enriched uranium fuel were calculated. The reactor used for the study was the IAEA’s 10 MW benchmark reactor. Simulations were carried out to calculate the different reactivity feedback coefficients including Doppler feedback coefficient, reactivity coefficient for change of water temperature and reactivity coefficient for change of water density. Nuclear reactor analysis codes including WIMS-D4 and CITATION were employed to carry out these calculations. It was observed that the magnitude of all the reactivity feedback coefficients increased at end of life of the reactor by almost 2–5%.     

Improved thermosets obtained from diglycidyl ether of bisphenol A/4,4′‐diaminodiphenylsulfone based on a new epoxy‐terminated hyperbranched polymer

A new hyperbranched polymer (HBP) with a flexible aromatic skeleton and terminal epoxy groups was synthesized to improve the toughness of diglycidyl ether of bisphenol A. The HBP was characterized using nuclear magnetic resonance, Fourier transfer infrared spectroscopy and gel permeation chromatography. The effect of HBP on the thermomechanical and mechanical properties of modified epoxy systems was studied. For evaluating the efficiency of the modified epoxy systems, composite samples using glass fiber cloth were molded and tested. Using dynamic mechanical analysis, a slight reduction in glass transition temperature (T_g) with increasing HBP content was observed. Analysis of fracture surfaces revealed a possible effect of HBP as a toughener and showed no phase separation in the modified resin systems. The results showed that the addition of 15 phr HBP maximized the toughness of the modified resin systems with 215 and 40% increases in impact and flexural strengths, respectively. T_g and heat resistance of cured modified resin systems decreased slightly with an increase in HBP content and, at 15 phr HBP, only a 2.6% decrease in thermomechanical properties was observed. Meanwhile, a molded composite with HBP showed improved mechanical properties and retention rate at 150 °C as compared to that made with neat resin. © 2015 Society of Chemical Industry     

烯丙基酚氧树脂改性双马来酰亚胺体系的优化

通过环氧树脂与二烯丙基双酚A合成了一种烯丙基酚氧树脂,用以增韧双马来酰亚胺。在单因素试验的基础上,根据Box-Benhnken的中心组合试验设计原理,选取改性树脂体系组分为影响因子,应用响应面法进行3因素3水平的18组的设计试验,改性树脂性能(弯曲强度,冲击强度,热变形温度)为响应值,对改性树脂组分配比进行优化。结果表明,改性树脂组分配比BMI、DDS、APO、DABPA、DAP为2∶1∶0.2∶0.84∶0.1(物质的量比)时,综合2性能最好,此时改性双马树脂体系的冲击强度可达到21.4 k J/m,弯曲强度为200.5 MPa,热变形温度为195.8℃。     

Microstructure Evolution of Extruded Mg-6Gd Alloy Under 175 ℃ and 150 MPa

The tensile creep behavior of extruded Mg-6 Gd alloy,having the tensile yield strength of～ 110 MPa at 175 ℃,has been investigated under 175 ℃ and 150 MPa. In this study, the extruded Mg-6 Gd sample exhibits the total tensile strain of ～10.5% after the creep time of 1100 h,and the fast plastic strain of ～4.6% at the beginning of the creep test. The microstructure result suggests that the dislocation deformation is the main deformation mode during creep, and the grains with orientation close to(0001) II ED disappear after creep. The creep process containing a low creep strain has no effective promotion for the precipitation compared with the aging process without strain. The origination of creep crack is related to the formation of precipitate-free zone during creep. The work offers an important implication to research the microstructure evolution under an applied stress in a weak aging response Mg alloy.     

Multi-focus images fusion via residual generative adversarial network

Multimedia Tools and Applications - Recently, most existing learning-based fusion methods are not fully end-to-end, which still predict the decision map and recover the fused image by the refined...     

A Real-Time Data Mining Approach for Interaction Analytics Assessment: IoT Based Student Interaction Framework

Students’ interaction and collaboration with the fellows and teachers using the Internet of Things (IoT) based interoperable infrastructure is a convenient way. Measuring student attention is an essential part of the educational assessment for students’ interaction. As new learning styles develop, new tools and assessment methods are also needed. The focus in this paper is to develop IoT based interaction framework and analysis of the student experience in electronic learning (eLearning) so that the students can take full advantage of the modern interaction technology and their learning can increase to a high level. This setup has a data collection module, which is implemented using Visual C# programming language and computer vision library. The number of faces, number of eyes, and status of eyes are extracted from the video stream, which is taken from a video camera. The extracted information is saved in a dataset for further analysis. The analysis of the dataset produces interesting results for student learning assessments. Modern learning management systems can integrate the developed tool to consider student-learning behaviors when assessing electronic learning strategies. The tools are also developed for the data collection on both student and teacher ends. Correlation of data and hidden meaning are extracted to make the learning experience and teaching performance better and adaptable. IoT based infrastructure provides the facilities to fellow students about location awareness, fellows’ accessibility, social behavior and helping hand.     

PLA/metal oxide biocomposites for antimicrobial packaging application

ABSTRACT

The effects of metal oxide addition in polylactic acid (PLA) film were investigated in this study. PLA/Metal Oxide biocomposites were prepared by solvent casting method. The incorporation of metal oxide resulted in no chemical structure change of neat PLA. PLA/ZnO and PLA/MgO exhibited the widest inhibition while PLA/TiO₂ resulted in the smallest inhibition zone. The addition of metal oxides caused fracture and void on the surface of PLA. The addition of metal oxide into PLA films decreased the tensile strength at the concentration higher than 0.1 per hundred resin (phr). Incorporation of metal oxides accelerated the thermal degradation of PLA and tends to increase the biodegradability of PLA.     

Interaction of Soil Air Permeability and Soil Vapor Extraction

A new theoretical model to analyze the measurements obtained from a typical soil column venting experiment is proposed. The principles of mass transfer, Darcy's law, and air compressibility in the form of pressure-volume relationships were coupled to calculate the contaminant concentration in the gas phase (air), and the rate of contaminant removal. The proposed model relates soil air permeability with the contaminant removal and is capable of calculating the variation of soil air permeability with time during the venting process. The contaminated sand sample was idealized as a system of straight capillary tubes in the direction of flow, lined by the liquid contaminant. A closed-form solution for radial diffusion of the contaminants in a cylinder, coupled with axial advection of air, was used to model contaminant removal. The results from the mass transfer model were then used to trace the change of soil air permeability with time. The model also uses, as an alternative approach, a modified form of Darcy's law for compressible flow.     

Measuring effect of the blooming of chemical curatives on the rate of cyclic fatigue crack growth in natural rubber filled with a silanized silica nanofiller

Two rubber compounds with different amounts of chemical curatives were prepared by mixing natural rubber with a high loading of a sulfur‐bearing silanized precipitated amorphous white silica nanofiller. The chemical bonding between the filler and rubber was optimized via the tetrasulfane groups of the silane by adding a sulfenamide accelerator and zinc oxide. The rubber compounds were cured and stored at ambient temperature for 65 days before they were tested. One compound showed extensive blooming as a function of storage time. Thin tensile strips of the rubber vulcanizates containing an edge crack were repeatedly stressed at constant strain amplitude and test frequency at ambient temperature and crack length c was measured as a function of the number of cycles n. The cut growth per cycle, dc/dn, was calculated and plotted against the tearing energy, T. The blooming of the chemical curatives increased dc/dn by up to an order of magnitude at a constant T. This was due to the reagglomeration of the chemical curatives in the rubber and also within a thin layer approximately 15 to 20 μm in size beneath the rubber surface. Under repeated stressing, cracks grew through the relatively weak agglomerated areas in the rubber and this caused the rate of crack growth to increase at a constant T. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012