Effect of precyclic loading on stress-corrosion-cracking initiation in an X-65 pipeline steel exposed to near-neutral pH soil environment

A study was carried out to understand the effect of precyclic loading on stress-corrosion-crack initiation in an X-65 pipeline steel exposed to a near-neutral-pH soil environment. The test specimens were precyclically loaded before corrosion exposure to represent a service history of up to about 20 years, depending on the severity of pressure fluctuation. Microcracks had initiated on the polished surface of the X-65 pipeline steel after long-time exposure at open-circuit potential (OCP) in a near-neutral-pH synthetic soil solution. These microcracks were mostly initiated from pits at metallurgical discontinuities such as grain boundaries, pearlitic colonies, and banded phases in the steel. Strong preferential dissolution was observed along planes of the banded structures in the steel. The selective corrosion attack at these metallurgical discontinuities is attributed to the galvanic nature of those areas to their neighbors. Cyclic loading prior to corrosion exposure had significant effects on microcrack initiation and propagation during subsequent corrosion exposure. Cyclic loading prior to corrosion exposure either reduced or increased the probability of crack initiation and the rate of crack propagation, depending upon the magnitude of the stress cycles. The largest reduction was seen at a peak cyclic stress of about 0.8 of the yield strength. This cyclic-loading-dependent cracking behavior might be related to the alteration of the substructures and the residual stress in the steel as a result of precyclic loading.     

ZnSe棱镜折叠波导CO_2激光器的研究

研制了使用ZnSe棱镜折叠的波导CO_2激光器,提出一种CO_2激光—He-Ne激光调整光路的方法,并获得了该种折叠激光器的振荡。进一步的改进可以提高其输出功率而得到实用性的器件。     

Web-based systems design: a study of contemporary practices and an explanatory framework based on “method-in-action”

This paper reports the findings of a detailed study of Web-based systems design (WBSD) practices in Ireland based on data collected over a 3-year period (2002–2005), the objectives of which were to (1) contribute towards a richer understanding of the current “real-world” context of WBSD by characterising the profile of a typical project (team size, timeframe, nature of requirements, etc.) and identifying the key challenges, constraints, and imperatives (i.e. “mediating factors”) faced by Web-based system designers, and (2) understand how those contextual parameters and mediating factors influence the activity of WBSD as regards the selection and enactment of whatever design practices are therefore engaged (i.e. the use of methods, procedures, etc.). Data was gathered through a survey which yielded 165 usable responses, and later through a series of semi-structured qualitative interviews. Using grounded theory, an explanatory conceptual framework is derived, based on an extension of the “method-in-action” model, the application of which to WBSD has not been previously investigated in depth. It is proposed that this framework of WBSD issues is valuable in a number of ways to educators, researchers, practitioners, and method engineers.     

含钡合金在钢液中的脱氧行为研究

在MoSi2炉上采用MgO质坩蜗对钢管进行了含钡合金脱氧行为的研究。实验中钡系合金主要选取SiAUBa、SiCaBa、SiAlBaCa、SiAlBeCaSr及用于钙处理的SiCa包芯线，选用Al作为对比脱氧剂，考察了钡系合金脱氧的全氧含量，脱氧产物的分布、尺寸和形貌，探讨了钡系合金脱氧和对夹杂物变性作用的机理。     

镁基储氢材料的研究进展

本文回顾和总结了近几十年来，特别是近十年来镁基储氢材料的发展情况，重点综述了机械合金化Mg-Ni2合金体系的研究情况及其近期的进展，从储氢材料成份及配比，制造工艺改进以及材料的组织结构对材料性能的影响等各方面进行一定的分析和归纳，对储氢材料研究中出现的问题以及今后的发展方向都作了探讨。     

基于S5933的PCI总线与8051的接口设计

简要介绍了PCI总线的特点，重点介绍了AMCC公司推出的S593X系列的高性能接口控制器，并通过实践给出基于S5933的PCI总线和8051的接口设计技术。     

New materials for diode laser pumping of solid-state lasers

The authors review recent progress in the development of new materials for III-V semiconductor diode lasers useful for pumping solid-state lasers. All of the diode lasers discussed are grown on GaAs substrates. Particular emphasis is placed on the performance and reliability of high-CW-power strained-layer InGaAs-AlGaAs diode lasers emitting in the wavelength range between 0.87 and 1.1 μm, improved resistance to degradation of 0.78 to 0.87 μm diode lasers afforded by the strained-layer AlInGaAs-AlGaAs and lattice-matched GaInAsP-GaInP materials systems, and improved performance of visible diode lasers utilizing the materials system GaInP-AlGaInP     

炮孔内空气间隙作用的机理探讨

本文探讨了装药结构中空气间隙作用的机理,提出了气体分子的迁移效应与碰撞效应,比较完满地解释了不同空气间隙对爆破效果的影响.