Bestimmung der Abtragungsraten von Zirconium,Tantal und der Legierung Tantal-40Niob in fluoridhaltiger azeotroper Salpetersäure mit Hilfe der Radiotracer-Methode

The radiotracer technique as a means to investigate the corrosion of zirconium, tantalum, and a Ta-40Nb alloy in fluoride containing azeotropic nitric acid Zirconium and tantalum as well as the tantalum 40% niobium alloy are of considerable technical importance due to their high corrosion resistance against numerous corrosive media. With respect to corrosion testing in analytically pure azeotropic nitric acid in the temperature range between 20 and 121°C, corrosion rates were determined for zirconium: 7 · 10^?6 to 5 · 10^?4 mm/y, for tantalum: 10^?8 to 4 · 10^?6 mm/y, and for the Ta-40Nb alloy: 2 · 10^?7 to 8 · 10^?6 mm/y [1]. These corrosion rates will be markedly increased by adding small amounts of fluorides or by fluoride impurities. The radiotracer method after neutron activation was applied to determine the corrosion rates in azeotropic fluoride containing nitric acid. Even minute additions of fluorides strongly affect the corrosion resistance of zirconium. In the range between 0.15 and 10 ppm F^? and at a temperature of 108°C, corrosion rates between 5.3 · 10^?3 and 3.1 mm/y were measured. It was impossible to establish a limit for the fluoride concentration, below which the corrosion rate of zirconium will not be adversely influenced. The corrosion rates of tantalum and the Ta-40Nb alloy are considerably increasing above a fluoride concentration of 10 ppm. The highest corrosion rates measured were between 8.4 · 10^?3 mm/y at 50°C/280 ppm F^? and 1.4 · 10^?2 mm/y at 110°C/320 ppm F^?. Within the range of this investigation, the corrosion resistance of tantalum was higher than that of the Ta-40Nb alloy by one order of magnitude. The corrosion resistance of zirconium and tantalum was not influenced by any treatment of the samples before testing.     

Holistic nursing--definition and realization

Single-channel properties of a delayed rectifier voltage-gated K+ channel (I-type) were investigated in peripheral myelinated axons from Xenopus laevis. Channels activated between -60 and -40 mV with a potential of half-maximal activation, E50, at -47.5 mV. Averaged single-channel currents activated with a time delay at all membrane potentials tested. Time to half-maximal activation decreased from 80 to 1.6 msec between -60 and +40 mV. The channel inactivated monoexponentially with a time constant of 10.9 sec at -40 mV. The time constant of deactivation was 126 msec at -80 mV and 16.9 msec at -110 mV. In symmetrical 105 mM K+, the single-channel conductance (gamma) was 22 and 13 pS at negative and positive membrane potentials, respectively, at 13-15 degrees C. In Na+ -rich solution with 2.5 mM extracellular K+ gamma was 7 pS and the reversal potential was negative to -80 mV, indicating a high selectivity for K+ over Na+. gamma depended on extracellular K+ concentration (KD = 19.6 mM) and temperature (Q10 = 1.45). External tetraethylammonium (TEA) reduced the apparent single-channel amplitude at all potentials tested with a half-maximal inhibiting concentration (IC50) of 0.6 mM. Open probability of the channel, but not single-channel current amplitude was decreased by extracellular dendrotoxin (DTX, IC50 = 6.8 nM). mast cell degranulating peptide (MCDP, IC50 = 41.9 microM). In Ringer solution the membrane potential of macroscopic I-channel patches was about -65 mV and depolarized under TEA and DTX. It is concluded that besides their activation during action potentials, I-channels may also stabilize the resting membrane potential.     

Materialien für die Brillenbeschichtung in Aufdampfanlagen

Materials for ophthalmic coatings in PVD – coating equipments In our days we cannot have an isolated view only at the coatings for organic lenses. We need to analyse the interaction of substrates, hardcoats and layerdesigns to deliver a longlife – quality of the complete complex “eyeglases”. Special in the field of organic substrates we could observe in the last years an enormous change. The push to deliver more and more thinner and lighter lenses, produces materials with higher indices. The result from this problem is not the adaptation of the antireflection desin at the substrate index but the adaption at the mechanical and thermal properties of these substrates. The caoting labs influence at the complete system is more or less reduced only by the antireflection system. The substrate‐ and hardcoat material could be influenced only by the “world player” for ophthalmic systems. All the small and middle size coating labs worldwide must buy the substrates‐ and the hardcoat materials and have to accept the quality. The only exertion of influence is in the selection of film materials for the AR‐coating and the process technology. The right choise of coating material in quality, form and costs is crucial for a high quality AR‐ coating. A multitude of factors must be considered for the selection of the adequate material.     

Investigations of the discharging of metal hydride beds for hydrogen-gasoline mixture operation of SI-engines

A mathematical simulation model is presented describing the discharge process of metal hydrides. The model is applied to FeTi-single tube and multiple tube beds and the results are compared directly to the results of experimental investigations. Furthermore, the most important engine parameters, with respect to the operation with metal hydride stored hydrogen, were determined for the nonsteady FTP 72-driving cycle. Minimum hydride quantities, necessary to supply the engine with hydrogen during the warm-up phase, were calculated for different starting temperatures and initial hydrogen contents of the bed.     

Monitoring, removal and risk assessment of cytostatic drugs in hospital wastewater.

Cytostatic agents are applied in cancer therapy and subsequently excreted into hospital wastewater. As these substances are known to be carcinogenic, mutagenic and toxic for reproduction, they should be removed from wastewater at their source of origin.In this study the fate and effects of the cancerostatic platinum compounds (CPC) cisplatin, carboplatin, oxaliplatin, 5-fluorouracil (5-FU) and the anthracyclines doxorubicin, daunorubicin and epirubicin were investigated in hospital wastewater. Wastewater from the in-patient treatment ward of a hospital in Vienna was collected and monitored for the occurrence of the selected drugs. A calculation model was established to spot the correlation between administered dosage and measured concentrations. To investigate the fate of the selected substances during wastewater treatment, the oncologic wastewater was treated in a pilot membrane bioreactor system (MBR) and in downstream advanced wastewater treatment processes (adsorption to activated carbon and UV-treatment). Genotoxic effects of the oncologic wastewater were assessed before and after wastewater treatment followed by a risk assessment.Monitoring concentrations of the selected cytostatics in the oncologic wastewater were in line with calculated concentrations. Due to different mechanisms (adsorption, biodegradation) in the MBR-system 5 - FU and the anthracyclines were removed < LOD, whereas CPC were removed by 60%. In parallel, genotoxic effects could be reduced significantly by the MBR-system. The risk for humans, the aquatic and terrestrial environment by hospital wastewater containing cytostatic drugs was classified as small in a preliminary risk assessment.