Jet Penetration of Surrogate Steel-Explosive Systems

Predicting the jet initiation of an explosive that is covered and in intimate contact with an inert material, is sensitive to the history of the jet in both the cover and the explosive. If the penetration velocity in the cover is subsonic, the acceptor explosive experiences complex wave structures that are significantly different from the case where the penetration velocity is supersonic. The pressure history in the explosive may cause prompt initiation, desensitization, or delayed initiation. We have used transparent polymethylmethacrylate (PMMA) as a surrogate for the explosive, allowing us to experimentally visualize the transition between the subsonic penetration behavior in a steel cover and the quasi-steady supersonic penetration behavior in the PMMA. The wave histories in PMMA downstream from two steel covers of different thicknesses have been measured by streak and image intensifier cameras and by flash radiography simultaneously. These were augmented with pressure gauges to measure the pressure history for one of the thicknesses. These experimental results and subsequent analysis show how initiation of an explosive acceptor can occur at various distances from the interface, depending on the thickness of the cover plate.     

Improving fast aspheric convex surface tests with dynamic null screens using LCDs

A method for testing fast aspheric convex surfaces with dynamic null screens using LCDs is shown. A flat null screen is designed and displayed on an LCD monitor with drop-shaped spots in such a way that the image, which is formed by reflection on the test surface, becomes an exactly square array of circular spots if the surface is perfect. Any departure from this geometry is indicative of defects on the surface. Here the whole surface is tested at once. The position of the spots on the LCD can be changed in a dynamic way, to perform point-shifting of the image spots. The proposed procedure improves the dynamic point-shifting method. As has been shown previously, this process reduces the numerical error during the integration procedure, thereby improving the sensitivity of the test. The positioning accuracy for the screen spots is related to the LCD's spatial resolution. Results of the evaluation of a parabolic convex surface with f/#=0.22 are shown.     

Optics Design and Verification for the APEX Swedish Heterodyne Facility Instrument (SHeFI)

In this paper, we present the design and verification of the optics of the Swedish Heterodyne Facility Instrument (SHeFI) receiver installed in the Atacama Pathfinder EXperiment (APEX) telescope during spring 2008. SHeFI is located in the Nasmyth instrumentation Cabin A (NCA). The receiver has been designed to have 6 frequency channels, of which four receiver channels have been built, and characterized: 211-275 GHz (Band 1), 275-370 GHz (Band 2), 385-500 GHz (Band 3), and 1250-1390 GHz (Band T2). Bands 1, 2, and T2 are installed at the telescope and are currently in operation. The optical design is driven by the requirement of frequency independent illumination of the secondary with -12 dB edge taper for each frequency channel and the limitation (beam clearance through the Nasmyth tube and the elevation encoder) imposed by the receiver position in the NCA. This paper describes the design approach, optimization, and verification of the optical system, coupling each individual receiving beam to the common optics of the telescope.     

Study of mechanical properties of AISI 316 stainless steel processed by “selective laser melting”, following different manufacturing strategies

Considering additive manufacturing (AM) as a field of major interest, this paper is focused on the study of the mechanical properties and their variability with manufacturing orientation (anisotropy) for a metallic alloy manufactured by AM, using the technology of selective laser melting (SLM). This study has been performed on an austenitic stainless steel—AISI 316 L—used for many industrial fields as chemical, cellulose, and medical, among them. Finally, the obtained properties have been analyzed and compared, for this steel, to those properties standardized and tested for “wrought” products. In this paper, previously published results are complemented, as the mechanical tests have been performed in all the possible directions of manufacturing by SLM and not only in two main directions. High mechanical values have been obtained, especially yield strength (significantly improved, compared with wrought or cast products) while keeping high values of ductility and notch impact resistance. For widespread industrial acceptance, AM parts need to be produced to high tolerances and with well-understood mechanical properties, and the aim of this paper is to contribute to this objective.     

Prognostic factors and treatment of advanced Hodgkin's disease

Treatment strategy is based on prognosis groups although there is no consensus on their definition. In stages IIIA with unfavorable factors and stages IIIB or IV without high risk factors, chemotherapy alone or followed by irradiation is used. To reduce toxicity, radiation therapy on bulky disease and residual masses is preferred to extended fields. Indications for intensive chemotherapy with autograft of hematopoietic stem cells as initial treatment for high-risk patients must be determined with therapeutic trials.     

Improved extraction of carrageenan from red seaweed (Chondracantus canaliculatus) using ultrasound-assisted methods and evaluation of the yield,physicochemical properties and functional groups

Food Science and Biotechnology - Red seaweed Chondracanthus canaliculatus, an underexploited algae species, was used as a potential source for the obtaining of carrageenan. Seaweed was treated...     

A Novel Heterostructure Based on RuMo Nanoalloys and N-doped Carbon as an Efficient Electrocatalyst for the Hydrogen Evolution Reaction

Heterostructures exhibit considerable potential in the field of energy conversion due to their excellent interfacial charge states in tuning the electronic properties of different components to promote catalytic activity. However, the rational preparation of heterostructures with highly active heterosurfaces remains a challenge because of the difficulty in component tuning, morphology control, and active site determination. Herein, a novel heterostructure based on a combination of RuMo nanoalloys and hexagonal N-doped carbon nanosheets is designed and synthesized. In this protocol, metal-containing anions and layered double hydroxides are employed to control the components and morphology of heterostructures, respectively. Accordingly, the as-made RuMo-nanoalloys-embedded hexagonal porous carbon nanosheets are promising for the hydrogen evolution reaction (HER), resulting in an extremely small overpotential (18 mV), an ultralow Tafel slope (25 mV dec⁻¹), and a high turnover frequency (3.57 H₂ s⁻¹) in alkaline media, outperforming current Ru-based electrocatalysts. First-principle calculations based on typical 2D N-doped carbon/RuMo nanoalloys heterostructures demonstrate that introducing N and Mo atoms into C and Ru lattices, respectively, triggers electron accumulation/depletion regions at the heterosurface and consequently reduces the energy barrier for the HER. This work presents a convenient method for rational fabrication of carbon–metal heterostructures for highly efficient electrocatalysis.     

Layer-by-Layer assembly and redox properties of undoped HPHT diamond particles

The surface properties of undoped diamond particles are investigated by a combination of zeta potential measurements in solution and electrochemical studies in thin layer assemblies. High-Pressure High-Temperature (HPHT) 500 nm diamond particles exhibit positive and negative zeta potentials depending on pH. The estimated point of zero zeta potential (pzzp) was 6.6, while mobility measurements provided an average charge per particle of ?(843 ± 31)e at high pH. The charge indicates that approximately 50 ppm of surface atoms involves ionisable impurities. The positive charge measured at low pH is of similar magnitude and could be related to nitrogen impurities. The surface charge in basic solutions allows the electrostatic adsorption of diamond particles on poly(diallyldimethylammonium chloride) (PDADMAC) modified In-doped SnO₂ electrodes (ITO). The particle number density shows a strong dependence on pH, with a maximum value of (1.7 ± 0.3) × 10⁸ cm^?2. Electrochemical studies carried out in the absence of redox species in solution revealed signals associated with sp² type surface states. Analysis of electrochemical responses concluded that 1 × 10⁴ redox centres per particle are involved in a single electron transfer process. We demonstrate that this simple yet versatile approach is rather sensitive to the extent of sp² hybridisation at the surface of diamond powders.