Molecular differentiation of the species of two squid families (Loliginidae and Ommastrephidae) based on a PCR study of the 5S rDNA gene

The present study aimed to demonstrate the effectiveness of the 5s rDNA gene for the identification of commercially-valuable species of cephalopod belonging to the families Loliginidae and Ommastrephidae. Our results demonstrate distinct banding patterns in each of the six species sampled (Loligo surinamensis; Loligo sanpaulensis; Lolliguncula brevis; Sepiotheuthis sepioidea; Ornithoteuthis antillarum; Illex argentinus), as well as diagnostic traits at the genus and probably family levels. The results emphasize the efficiency of the 5s rDNA marker as a low-cost and rapid forensic technique, which not only permits the identification of species, but also differentiation of members of the Loliginidae and Ommastrephidae.     

Effect of the inelastic dynamic soil-structure interaction on the seismic vulnerability assessment

This paper presents a study of the influence of inelastic dynamic soil-structure interaction (DSSI) on the seismic vulnerability assessment of buildings. The seismic vulnerability is evaluated in terms of analytical fragility curves constructed on the basis of non-linear dynamic finite elements (FE) analysis. An analytical sensibility strategy is introduced in order to define a suitable size of the motion database to be used for computing fragility curves. The fragility curves developed in this study are compared with reference curves. Concerning the effect of the inelastic DSSI, a general reduction of seismic demand when DSSI phenomena are included is found. Derived fragility curve reflects this seismic demand reduction. The importance of the ground motion database is highlighted in terms of the variability of parameters describing derived fragility curves. Comparison with reference curves are satisfactory. Findings illustrate clearly the importance and the advantages of an adequate DSSI effects evaluation.     

Stress–strain relationship in axial compression for concrete using recycled saturated coarse aggregate

In this work the stress–strain curve of the recycled concretes was determined by replacing different percentages of the natural coarse aggregate with recycled coarse aggregate (20%, 50% and 100%). The results made it possible to establish the differences between the stress–strain relationship of a conventional concrete and this relationship for a recycled concrete depending on the percentage of replacement. In this way, it was found that the longitudinal strain of the recycled concretes increases with the percentage of recycled coarse aggregate used.Finally, using the experimental results, an analytical expression of the stress–strain curve accounting for the percentage of replacement was developed. The verification of the proposed model equation was done by comparing it to the experimental data. The results show that the proposed model equation satisfactorily describes the effect of the recycled aggregate on the stress–strain curve.     

Site‐Selectively Coated,Densely‐Packed Microprojection Array Patches for Targeted Delivery of Vaccines to Skin

Densely packed dry‐coated microprojections are shown to deliver vaccines to targeted locations within the skin that are rich in immune cells, thus inducing protective immune responses against a lethal virus challenge. Selectively limiting the antigen coating to the tips of the projections, which penetrate the skin, would significantly reduce the amount of vaccine required in immunization. In this paper a simple technique, dip‐coating the microprojections, is introduced to meet this goal. By increasing the coating solution viscosity, an otherwise strong capillary action is mitigated and the desired controlled coating length on projections is achieved. Following application to the skin, most of the coated vaccine material is rapidly released from the projections (82.6% in mass within 2 min) to the target locations within the skin strata and a potent immune response is induced when a conventional influenza vaccine (Fluvax) is tested in a mouse model. The utility of this coating approach to a variety of molecules representative of vaccines (e.g., chicken egg ovalbumin (OVA) protein, DNA, and fluorescent dyes) is demonstrated. These collective attributes, together with the simplicity of the approach, position the dip‐coating method for practical utility in large vaccination campaigns.     

A facile single-step procedure for the synthesis of luminescent Ln3+:YVO4 (Ln = Eu or Er + Yb)-silica nanocomposites

A simple and single-step method for the production of Ln-doped YVO₄ nanocrystals and their simultaneous encapsulation in a silica network based on the pyrolysis of liquid aerosols at 800 °C is reported. The procedure is illustrated for Yb,Er:YVO₄-silica nanocomposites consisting of spherical particles, which present up-converted green luminescence after IR excitation whose efficiency increased on annealing up to 1000 °C due to the release of impurities (adsorbed water, and residual anions). XPS spectroscopy and TEM observations revealed that the surface of the composite particles was enriched in silica, which would facilitate their functionalisation required to use them in biological applications. The procedure can also be used to prepare other rare earth doped systems as illustrated for the case of Eu-doped YVO₄/silica having down-converted red luminescence.     

Thermo-Metallurgical Modeling of Nodular Cast Iron Cooling Process

A new numerical model to describe the microstructural evolution of a eutectic nodular cast iron during its cooling is presented. In particular, equiaxial solidification assuming an independent nucleation of austenite and graphite nodules is considered. In this context, the austenite has dendritic growth whereas the graphite grows with a spherical shape. After solidification occurs, the model assumes that the graphite nodules present in the cast iron continue growing since the carbon content in austenite decreases. Once the stable eutectoid temperature is reached, the alloy undergoes the austenite-ferrite transformation. The nucleation of the ferrite takes place at the contour of the spherical graphite nodules where austenite has low carbon concentration. A ferrite shell surrounding the graphite nodules is formed afterward by means of a process governed by carbon diffusion. Then, a ferrite-pearlite competitive transformation occurs when the temperature is below the metastable temperature. This thermo-metallurgical model is discretized and solved by means of the finite element method. The model allows the computation of cooling curves, fraction evolution for each component, and size and distribution of graphite nodules. The present numerical results are compared with experiments using standardized Quick-cup-type cups, and satisfactory numerical predictions of the final microstructure and cooling curves are achieved.     

Hydroxyapatite deposition study through polymeric process on commercially pure Ti surfaces modified by laser beam irradiation

Many techniques have been used to coat metallic substrate with bioceramics. The aim of this study was to study the physical-chemical characteristics of polyvinylidene fluoride (α-PVDF)/hydroxyapatite (HA) composite coating, obtained by casting method, on commercially pure titanium (α-CP Ti) substrate surface modified by laser beam irradiation. The preparation of coating was done for mixing α-PVDF pellets shape dissolved in dimethylacetamide (DMA) with HA/DMA emulsion. The mixture was poured onto the α-CP Ti sample and left to dry in an oven. CP Ti plates were coated with α-PVDF/HA composite film, in proportions of 100/00 and 60/40 in weight, and characterized by particle size analysis, scanning electron microscopy, energy dispersive spectroscopy (EDS), X-ray diffractometry, thickness measurement and contact angle. Uniform coating with a small thickness variation along the coated surface was successfully obtained.