Granular gases in mechanical engineering: on the origin of heterogeneous ultrasonic shot peening

The behavior of an ultrasonic shot peening process is observed and analyzed by using a model of inelastic hard spheres in a gravitational field that are fluidized by a vibrating bottom wall (sonotrode) in a cylindrical chamber. A marked heterogeneous distribution of impacts appears when the collision between the shot and the side wall becomes inelastic with constant dissipation. This effect is one order of magnitude larger than the simple heterogeneity arising from boundary collision on the cylinder. Variable restitution coefficients bring the simulation closer to the general observation and allow the investigation of peening regimes with changing shot density. We compute within this model other physical quantities (impact velocities, impact angle, temperature and density profile) that are influenced by the number N of spheres.     

Solution of large deformation contact problems with friction between Blatz-Ko hyperelastic bodies

The present paper is devoted to the analysis of the contact problems with Coulomb friction and large deformation between two hyperelastic bodies. One approach to separate the material nonlinearity and contact nonlinearity is presented. The total Lagrangian formulation is adopted to describe the geometrically nonlinear behavior. Nondifferentiable contact potentials are regularized by means of the augmented Lagrangian method. Numerical examples are carried out in two cases: rigid-deformable contact and deformable-deformable contact with large slips. The numerical results prove that the proposed approach is robust and efficient concerning numerical stability.     

Chemical characterization of in vivo aged zinc phosphate dental cements

The chemical composition of zinc phosphate dental cements aged in vivo was studied. Twenty-seven samples aged 2 to 43 years were investigated using X-ray diffraction, infrared spectroscopy, ³¹P nuclear magnetic resonance spectroscopy, thermogravimetric analysis and differential scanning calorimetry. Evidence for the presence of zinc oxide, amorphous zinc phosphate, water of hydration and crystalline zinc phosphate tetrahydrate was found. The latter was identified as hopeite; it was present in 92% of the cements studied. No correlation with time concerning either the chemical structure of the components or their relative amounts was found. Zinc phosphate dental cements show very good chemical stability on long-term use.     

Mixture-proportioning of high-performance concrete

The paper presents a new approach to design concrete mixtures. It is based upon a set of models relating composition and engineering properties of concrete, to be implemented into software, linked with a material database. The principles underlying the various models are summarized, most of which focus on the granular structure of fresh/hardened concrete. A global approach to concrete is promoted, where performance specifications can be formulated in terms of fresh concrete (yield stress, plastic viscosity, slump and air content), hardening concrete (adiabatic temperature rise and autogenous shrinkage) and hardened concrete (compressive strength at any age, tensile strength, elastic modulus, creep and shrinkage). This approach is illustrated through the design of a special high-shrinkage high-performance concrete (HPC) for road application. To date, durability is lacking in the model and requires further research.     

Pre-operational environmental survey at the uranium mine and mill site,Poços de Caldas,Minas Gerais,Brazil

The first Brazilian uranium mine and mill are located on the Poços de Caldas plateau, in the Central State of Minas Gerais. The pre-operational environmental survey was carried out over a period of two years by the Brazilian Nuclear Energy Commission (CNEN), through the Instituto de Radioproteção e Dosimetria (IRD). The selection of the materials to be monitored, the sampling points and the radionuclides to be analysed were based on critical parameters taking into account the meteorological and hydrological characteristics of the site as well as land use. The results obtained are sufficient to characterize the environmental background of the area, and will allow an assessment of the environmental impact due to the operation of the facility and an evaluation of the adequacy of the effluent emmission control measures. In relation to their contribution to the population dose, the results indicated that ²²⁶Ra and ²¹⁰Pb will be the important radionuclides.     

Stress resultant geometrically non-linear shell theory with drilling rotations. Part III: Linearized kinematics

A consistent formulation of the geometrically linear shell theory with drilling rotations is obtained by the consistent linearization of the geometrically non-linear shell theory considered in Parts I and II of this work. It was also shown that the same formulation can be recovered by linearizing the governing variational principle for the three-dimensional geometrically non-linear continuum with independent rotation field. In the finite element implementation of the presented shell theory, relying on the modified method of incompatible modes, we were able to construct a four-node shell element which delivers a very high-level performance. In order to simplify finite element implementation, a shallow reference configuration is assumed over each shell finite element. This approach does not impair the element performance for the present four-node element. The results obtained herein match those obtained with the state-of-the-art implementations based on the classical shell theory, over the complete set of standard benchmark problems.     

The composition of volatile extractives from the wood of Juniperus excelsa, Juniperus foetidissima and Juniperus oxycedrus

J. excelsa , J. foetidissima and J. oxycedrus. Among the compounds the monoterpenes exist in minor amounts while the sesquiterpenes including their oxygenated members as well as sesquiterpene alcohols consist of the majority of the whole substances. The existence of some compounds of the oils might be attributes of the species and their sap- and heartwood. On the other side though notable differences, the essential oils of Turkish juniper woods resemble the commercial cedar wood oils.

---

Die Zusammensetzung der flüchtigen Extraktstoffe im Holz von Juniperus foetidissima und Juniperus oxycedrus

J. excelsa , J. foetidissima und J. oxycedrus. Monoterpene bilden einen geringen Anteil der Extraktstoffe. Der Hauptteil besteht aus Sesquiterpenen mit deren Oxydationsprodukten. Das Vorkommen einiger der ?le k?nnte charakteristisch sein für die jeweilige Art bzw. deren Splint- und Kernholz Allerdings gleichen diese ?le, trotz geringer Unterschiede, den wesentlichen ?lbestandteilen von Kommerziellen Zedernh?lzern.

---

---

This work was supported by the research found of the Istanbul University. Project nr: 1335/280799.     

Potential science-technology spillovers in regions: An insight on geographic co-location of knowledge activities in the EU

This article depicts some features of the geography of science and technology outputs in the EU, with a particular attention to regional “co-location” of these two pillars of the “knowledge-based society”. Economists have, for a decade, paid great attention to local “spillovers” stating that industrial firms often draw advantages from the presence of nearby academic centres. The presence in the same areas of strong academic and technological resources is both a condition and a result of science-technology interactions. Concentrating on publications and patents as proxies of the science and technology level in regions, we built a typology of regions according to their commitment to the two knowledge-base activities and then analysed the co-locations of science and technology from several points of view. A fine-grain lattice, mainly based on standard Nuts3 level, was used. Co-location, at the EU level, is not a general rule. A strong potential for spillover/ interaction does exist in the top-class regions which concentrate a high proportion of European S and T output. But for regions with a small/medium level of S&T activity, a divergence of orientations appears between a science-oriented family and a technology-oriented family, indicating an imbalance between local S and T resources. If we look at the S-oriented regions, whilst controlling for underlying factors, such as population and regional economic product, a significant geographic linkage between T and S appears. This suggests a trajectory of science-based technological development. A careful examination of S&T thematic alignments and specialisation is necessary to develop the hypothesis that fostering academic resources could increase the technological power along a growth path. This revised version was published online in August 2006 with corrections to the Cover Date.