Methamphetamine Blocks Adenosine A2A Receptor Activation via Sigma 1 and Cannabinoid CB1 Receptors

Methamphetamine is, worldwide, one of the most consumed drugs of abuse. One important side effect is neurodegeneration leading to a decrease in life expectancy. The aim of this paper was to check whether the drug affects one of the receptors involved in neurodegeneration/neuroprotection events, namely the adenosine A_2A receptor (A_2AR). First, we noticed that methamphetamine does not affect A_2A functionality if the receptor is expressed in a heterologous system. However, A_2AR becomes sensitive to the drug upon complexes formation with the cannabinoid CB₁ receptor (CB₁R) and the sigma 1 receptor (σ₁R). Signaling via both adenosine A_2AR and cannabinoid CB₁R was affected by methamphetamine in cells co-expressing the two receptors. In striatal primary cultures, the A_2AR–CB₁R heteromer complex was detected and methamphetamine not only altered its expression but completely blocked the A_2AR- and the CB₁R-mediated activation of the mitogen activated protein kinase (MAPK) pathway. In conclusion, methamphetamine, with the participation of σ₁R, alters the expression and function of two interacting receptors, A_2AR, which is a therapeutic target for neuroprotection, and CB₁R, which is the most abundant G protein-coupled receptor (GPCR) in the brain.     

A New Triazole-Thiol Compound Organofunctionalized on the Silica Gel Surface: Chemical Properties and Copper Sorption in Ethanol / Water Media

Silicon - This study describes the preparation and characterization of 3-chloropropyl silica gel with 4-amino-5-(4pyridyl)-4H-1,2,4-triazole-3-thiol (SGA) for copper adsorption in different media....     

The AFLATOX® Project: Approaching the Development of New Generation,Natural-Based Compounds for the Containment of the Mycotoxigenic Phytopathogen Aspergillus flavus and Aflatoxin Contamination

The control of the fungal contamination on crops is considered a priority by the sanitary authorities of an increasing number of countries, and this is also due to the fact that the geographic areas interested in mycotoxin outbreaks are widening. Among the different pre- and post-harvest strategies that may be applied to prevent fungal and/or aflatoxin contamination, fungicides still play a prominent role; however, despite of countless efforts, to date the problem of food and feed contamination remains unsolved, since the essential factors that affect aflatoxins production are various and hardly to handle as a whole. In this scenario, the exploitation of bioactive natural sources to obtain new agents presenting novel mechanisms of action may represent a successful strategy to minimize, at the same time, aflatoxin contamination and the use of toxic pesticides. The Aflatox^® Project was aimed at the development of new-generation inhibitors of aflatoxigenic Aspergillus spp. proliferation and toxin production, through the modification of naturally occurring molecules: a panel of 177 compounds, belonging to the thiosemicarbazones class, have been synthesized and screened for their antifungal and anti-aflatoxigenic potential. The most effective compounds, selected as the best candidates as aflatoxin containment agents, were also evaluated in terms of cytotoxicity, genotoxicity and epi-genotoxicity to exclude potential harmful effect on the human health, the plants on which fungi grow and the whole ecosystem.     

Influence of radial and axial runouts on surface roughness in face milling with round insert cutting tools

In face milling processes, the surface quality of the machined part depends on many factors, including feed, cutting tool geometry and tool errors. In this work, a numerical model for predicting the surface profile and surface roughness as a function of these factors is presented, incorporating a random values generation algorithm that makes it possible to determine the variation in surface roughness from the values that can be adopted by tool errors. This work is focused on round insert cutting tools and the influence of tool errors such as radial and axial runouts. The results that correspond to a number of teeth equal to 4, insert diameter of 12 mm, depth of cut of 0.5 mm, cutting speed of 120 m/min and feed of 0.4–1.4 mm/rev are analysed. Milling experiments are made to verify the validity of the model and the discrepancies between the experimental and theoretical surface profiles are assumed to be a consequence of different factors such as the variation in undeformed chip thickness along the surface profile.     

OPTIMAL DESIGN AND PERFORMANCE OF SPIRAL WOUND MODULES I: NUMERICAL METHOD

A numerical method has been developed for the performance prediction of spiral wound modules with constant and tapered permeate spacers, It takes into account the pressure drop in the brine and permeate channels and makes use of a three parameter model for the mass transfer through the membrane. For a given application and operating conditions, optimum geometrical characteristics of modules can be found. Tapering the permeate spacer the specific permeation rate can be increased by 10-30%, the wider the membrane the higher the value.     

EFFECT OF CROSS FLOW ON THE SPRAY CHARACTERISTICS OF AN INDUSTRIAL FEED NOZZLE

The spray characteristics of a scaled-down version of an industrial feed nozzle are studied in the presence of a cross flow. Aerated liquid nitrogen is injected through the nozzle to generate the spray. The aeration rate is low and held constant, while two different liquid flow rates are used to produce the spray. A nonuniform wind profile is chosen to represent the cross flow condition. The droplet diameter and velocity measurements are acquired using a phase-Doppler particle analyzer. The results of the present study indicate that the spray momentum flux determines the extent of the jet bending. The droplets are accelerated significantly in the initial jet region as a result of flashing. However, further downstream of the nozzle, the vaporization of the droplets is considered to be negligible. The size-velocity correlation changes significantly for the case where the spray is shifted due to the cross flow.     

An International Collaborative Study on Trypsin Inhibitor Assay for Legumes,Cereals, and Related Products

For determining trypsin inhibitor activity (TIA) in soy products, the American Oil Chemists' Society (AOCS) Method Ba 12-75 has been used. It measures differences in absorbance at 410 nm of bovine trypsin activity toward a synthetic substrate (Nα-benzoyl-DL-arginine-p-nitroanilide) in the absence and presence of an inhibitor. Recently, a significantly improved method was developed (JAOCS, 2019, 96:635–645), featuring 5 mL of total assay volume, enzyme-last sequence, and single inhibitor level in duplicate. It is proposed as the AOCS Method Ba 12a-2020. As a part of the AOCS method approval process, a collaborative study involving 12 international laboratories was conducted to evaluate the performance of the proposed method. The study involved measuring TIA in 10 selected test samples plus a blind duplicate. They included soybeans, pulses, cereals, and their processed products (flours, concentrates, and isolates). After rigorous statistical treatment of the data, only three outliers were removed from the data of two samples. Repeatability relative standard deviations (RSDr) for the 11 samples ranged from 0.99% to 5.52%. Reproducibility RSD (RSD_R) ranged from 7.07% to 22.92%, with seven samples having RSD_R around 10% or less. The remaining four samples had very low TIA, and their RSD_R values ranged from 13.34% to 22.92%. The study has demonstrated reliable performance of the proposed AOCS method. Several collaborators carried out additional experiments addressing some aspects of the method, leading to further refinements. The proposed method is undergoing evaluation by the AOCS Uniform Methods Committee for adoption as an Official Method for measuring TIA in various legume and grain products.     

Robust linear parameter‐varying control of induction motors

The paper deals with the motion control of an induction motor. Because the nonlinear state equations describing the dynamics of such a machine can be embedded into a linear model with the rotor speed ω as a varying parameter, advantage is taken of some recent results on the control of linear parameter‐varying systems, thus ensuring stability independently of how the varying parameter changes in time within a compact set. The adopted control structure consists of a fast inner electric loop that controls the stator currents and an outer mechanical loop that generates the torque acting on the motor shaft. Of crucial importance is the design of the internal model controller for the current loop. In particular, it is proved that an algebraically equivalent electric motor model admits a Lyapunov function that, together with its Lyapunov derivative, is independent of ω and of all motor parameters. This result allows us to find an upper bound on the norm of the Youla–Kucera parameter that ensures robust stability against speed measurement errors. Simulations carried out on a benchmark motor model show that the adopted control strategy performs well. Copyright © 2014 John Wiley & Sons, Ltd.